Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Fort Myers
Chimney cap and crown work in Fort Myers usually runs $180-$640 depending on whether you need a cap replacement, custom fabrication, or full crown repair. Most jobs we handle take half a day, and our crews drive out to Fort Myers from our South Florida dispatch office with parts already on the truck for the common 1970s-1990s masonry chimneys we see along McGregor Boulevard and the older city neighborhoods. If you’ve noticed water staining near the damper, noise in the flue, or a cap that’s visibly rusted through, call (980) 580-8641 and we’ll give you a written price before anyone touches the chimney.
Why Emberly Chimney Cleaners Is Fort Myers’s Preferred Chimney Cap & Crown Company
We built our Chimney Cap & Crown practice around one thing Fort Myers homeowners didn’t have before 2009: a camera-scan inspection standard that documents exactly what’s happening inside the flue before we quote a dollar of repair. That practice is Clause 4 of the Haven Standard, and it applies to every cap we replace, every crown we recoat, and every chimney we touch in Fort Myers. Corrine Halstead, who runs our South Florida operations, insists on the same written-scope discipline on a $240 cap replacement as on a $4,000 crown rebuild. The price is in writing first. The scope is in writing first. The warranty is in writing first.
Our techs in Fort Myers show up background-checked and uniformed, and you get a text when they’re on the way. Every visit ends with a documented photo record, whether the camera goes 25 feet down a flue or just across a cracked crown. That’s been our default for 38,000-plus chimney inspections and cleanings since 2009. We don’t ask you to take our word for anything. We show you the frame of video where your cap screen has separated from the collar, and then we explain in two sentences what it means and what it costs to fix.
Our Chimney Cap & Crown Services in Fort Myers
Cap Installation
New cap installation in Fort Myers means matching the cap to the flue’s actual inside diameter, not guessing from the ground. If you have a clay-tile flue on a 1970s brick chimney, the tile often extends irregularly beyond the crown wash, and a one-size cap will sit crooked or rattle in wind. We measure, photograph, and install a stainless or copper cap sized for the specific tile projection on your flue. Materials come from our trusted fabricators like Famco and Copperfield, sourced through Haven’s buying network to keep the price honest.
Cap Replacement
Replacement work here is rarely a simple swap. Gulf salt air eats through standard cap screens at the weld points in as little as three years, even on chimneys that have never seen a fire. We remove the old cap, inspect the flue tile beneath for spalling or hidden cracks, and install a heavier-gauge stainless cap with animal-rated mesh where the old one sat. If Hurricane Ian knocked the original loose or tore it off entirely, we check the flue alignment before anything gets bolted back on. Lining a new cap over a displaced tile just guarantees a redo call in 18 months.
Crown Repair
Crowns on Fort Myers masonry chimneys crack most often at the drip edge. Twenty or thirty years of salt-humid expansion and contraction pulls the cement away from the clay tile, and water gets behind the flue liner. That’s a slow, invisible failure that rots framing through rainy season after rainy season. We repair crowns by removing the damaged cement, checking the flue tile underneath with a camera, and rebuilding the crown with proper slope and a real drip edge so water sheds instead of pooling. Crown repair in Fort Myers typically runs $500-$1,200 depending on access and extent.
Crown Coating
When the crown is structurally sound but has hairline cracking or surface erosion, we apply a flexible crown coat that seals the concrete without hiding underlying damage. Coating is not a substitute for repair. If the crack runs deep or the crown has separated from the tile, we’ll tell you that plainly and write the repair scope instead. In Fort Myers, coating a standard single-flue crown runs about $300-$600, and we photograph everything before and after so you can see exactly what was sealed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Fort Myers
We stock and install parts from Famco, Copperfield, and DuraFlex, with materials procured through Haven’s buying network specifically so Fort Myers customers don’t pay inflated retail markups on caps, mesh, and crown materials. That means faster turnaround on custom sizes and heavier-gauge stainless options that hold up to salt air. If you have an older chimney with an unusual flue dimension, we can usually have a custom-fabricated cap ready for install within a week, not a month.
Common Chimney Cap & Crown Problems We See in Fort Myers Homes
- Raccoon and bird intrusion in idle flues: Fort Myers’s subtropical climate means most fireplaces go unlit for years. A missing or damaged cap turns an idle flue into a den site within one season. We’ve pulled nests out of smoke chambers on chimneys where the homeowner called about noise near the damper, not about heating.
- Salt-corrosion at cap screen welds: Even inland Fort Myers gets enough Gulf-sourced salt in the air to rust standard caps at the seam. The screen separates from the collar, leaving a hole that swallows birds and storm rain. A hardware-store cap barely lasts two seasons here.
- Cracked crowns at the drip edge: Decades of humidity-driven expansion separate crown cement from the flue tile, and water channels behind the clay. The crack often looks minor from the ground. The damage behind it is not.
- Hurricane Ian displacement: After September 2022, we saw caps shifted, missing, or sitting cockeyed on flues throughout Lee County. The first sign isn’t usually a draft problem. It’s a mold bloom around the damper plate, months later.
Pricing for Chimney Cap & Crown in Fort Myers, FL
A standard cap replacement in Fort Myers runs $180-$400 for a stainless cap sized to a single flue. Custom multi-flue caps run $450-$900 depending on dimensions and mesh gauge. Crown repair starts around $500 for minor drip-edge work and goes up to $1,200 for a full recrown on a larger masonry chimney. Coating a sound crown runs $300-$600. These are written ranges, not post-visit surprises, and they include our camera inspection and photo record. If you already have a written estimate from another company, bring it to us. Corrine Halstead will line up our scope beside theirs and tell you what’s different, in writing, free. Call (980) 580-8641 for a written price before any work starts.
We Also Serve Cities Near Fort Myers
Our crews run Fort Myers calls along the McGregor Boulevard corridor and into the older city neighborhoods weekly, and we cover the surrounding Lee County market too: North Fort Myers, Cape Coral, Lehigh Acres, and Estero. If you live outside the immediate city, the same written-price standard and camera-scan inspection apply. The drive is our problem, not a line item on your invoice.
Serving Fort Myers, FL - Our Local Coverage Area
We’re based in the Fort Myers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Fort Myers
Yes, and in Fort Myers the cap matters more, not less. An unused flue is exactly where raccoons den and birds nest, and every month a missing cap means rain, humidity, and salt air moving through the clay tile and into the smoke chamber. A cap is not a fire-prevention accessory here. It’s the lid that keeps wildlife out and water from rotting the framing your chimney passes through. If yours is missing, call (980) 580-8641 and we’ll give you a written price for a replacement sized off the tile, not guessed from the curb.
Look for a thin crack running around the outer edge of the cement crown, or a gap between the cement and the clay flue tile. Ian’s winds and the horizontal rain that followed opened thousands of these drip-edge cracks across Lee County, and most homeowners never see them because they’re above the roofline. The first interior sign is usually a dark stain or musty smell at the fireplace damper, not a leak in the ceiling. If you haven’t had a post-storm crown inspection, we’ll camera-scan the flue and show you photos before we write any repair scope.
If the crown has minor surface cracking, you replace just the cap and coat the crown. If the crown has separated from the flue tile or crumbled at the drip edge, a new cap will not stop water from running behind the tile, and you need crown repair first. We do not sell crown work on speculation. The camera tells us whether the crack is cosmetic or structural, and we hand you the photos either way. Replacement starts with what the tile and crown actually measure, not a guess from the sidewalk.
Because the Gulf salt air here corrodes standard 24-gauge caps at the screen welds in as little as three years, even on chimneys that are never lit. We specify a heavier-gauge stainless and an animal-rated mesh for Fort Myers installs, and we source through Famco and Copperfield specifically to keep that heavier material affordable. The difference is the difference between a cap that lasts a decade and one that fails at the seam in three seasons. Call (980) 580-8641 if you’re tired of replacing caps and want one sized and spec’d for this air, not for Orlando.
Yes, and the reason is almost always that the clay tile on a 1970s-1990s Fort Myers chimney extends unevenly beyond the crown or sits slightly off-level from decades of humidity movement. Online caps are sized to round, smooth flues. Your flue is neither. We measure the tile’s actual dimensions, photograph the projection, and either shim and secure a correctly sized cap or order a custom fit that won’t rattle loose in the next storm. If you’ve already bought a cap, bring it to the inspection. If it fits, we’ll say so. If it doesn’t, we’ll explain why in one sentence and write the price for one that does.
Call Emberly Chimney Cleaners for Chimney Cap & Crown in Fort Myers
If your cap is rusted through, missing, or clattering in the wind, or if you suspect your crown cracked during Hurricane Ian, don’t guess and don’t wait for the next rainy season to turn a small crack into a framing problem. Call (980) 580-8641 and talk to a live person, day or night. Corrine Halstead runs our South Florida team, and every Fort Myers job gets a written price, a written scope, and a documented photo record. Nothing is recommended without camera evidence you can see for yourself. If it’s not done right under the Haven Standard, we make it right, for 365 days after the job is complete.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Fort Myers and Lee County under the Haven Standard since 2009.
Chimney Cap & Crown in Nearby Areas