Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Fordham
Chimney cap and crown work in Fordham isn’t the same job it is in a single-family suburb. Most of our calls here come from pre-war brick walk-ups and elevator buildings on streets like East 189th, Bainbridge, and Valentine Avenue, where one masonry stack carries four to eight separate flues serving different apartments or boilers. A cracked crown or missing cap on one flue doesn’t just affect that line. It lets water, debris, and nesting material into adjacent flues two or three floors away. Our Chimney Cap & Crown team works from the roof down, documenting what we find with a camera before we touch anything. Call (980) 580-8641 and we’ll send a background-checked, uniformed tech to your Fordham building, usually within a few days of your call.
Key Takeaways
- Cap and crown repair on a Fordham shared stack costs $385-$2,400 depending on scope, flue count, and masonry condition.
- A missing cap on one flue can pull carbon monoxide from a neighboring boiler flue into an occupied apartment.
- Freeze-thaw cycles in the Bronx crack crown mortar at the stack edge, letting water migrate into boiler rooms below.
- Every job gets a written price before work starts and a documented photo record when it’s done, under Haven Standard Clause 1 and Clause 4.
- We install multi-flue caps sized to Fordham’s pre-war stacks without shutting down the building’s boiler.
Why Emberly Chimney Cleaners Is Fordham’s Preferred Chimney Cap & Crown Company

We’ve been on enough Fordham rooftops to know what these stacks look like before the ladder goes up. The housing stock here is dominated by 4-to-6-story walk-ups and elevator buildings, most erected between 1910 and 1940. Those original clay tile flues were sized for coal-fired furnaces. When buildings converted to gas, the oversized and often-unlined flues became chronic backdrafting and carbon monoxide hazards. That’s the backdrop for nearly every cap and crown job we do in Fordham.
Our crews working Fordham know the roof access is tight. Parapet walls, steep ladder wells, and bulkhead doors with rusted hinges are standard. The street grid around Jerome Avenue and Grand Concourse means parking a service van is half the job. We schedule around it. When Corrine Halstead founded the company, she built the inspection protocol around what homeowners can actually verify: camera footage, written scope, written warranty. That practice became Clause 4 of the Haven Standard. It’s not a premium add-on. It’s the default, on every Fordham visit, since 2009.
We’ve completed more than 38,000 inspections and cleanings across the metro area, every one quoted in writing before work began and documented with photos when it was done. Fordham customers get the same thing. A named tech, a text when they’re on the way, and a camera down the flue before any recommendation is made.
Before
AfterOur Chimney Cap & Crown Services in Fordham
Cap Installation
Most Fordham chimney stacks were built before stainless steel caps existed. If your building still has open flue tiles or a rusted galvanized cap from the 1980s, we install galvanized or stainless caps sized to the actual flue opening, not the guess on the invoice. For the shared stacks off Webster Avenue and East Fordham Road, we measure each flue individually. A cap that fits one flue won’t necessarily fit its neighbor. We stock Famco and Olympia Chimney products locally, so turnaround on a standard cap install in Fordham is fast.

Cap Replacement
A cap that’s been on a Fordham rooftop for 20 winters is usually rusted through at the mesh or missing its lid. When we replace it, we photograph the old cap before removal and the new cap after install. That photo record is yours. It’s Clause 4 of the Haven Standard, and it’s been our practice since before insurers asked for it. If you’re in a co-op or condo near Poe Park or St. James Park, your board will want that documentation. We provide it automatically.

Crown Repair
The crown is the concrete or mortar slab that seals the top of the masonry stack. On Fordham’s pre-war buildings, the original crown was often poured with a mix too weak for a century of freeze-thaw cycling. We see crowns cracked in a spiderweb pattern, crowns with edges spalled off, and crowns that have separated from the flue tile entirely. When that happens, water runs down inside the flue and exits as dampness or mortar stains in a unit two floors below, not necessarily directly under the leak. That’s why tenants blame the wrong flue and the real leak goes unfixed. We repair crowns with Gelco crack filler after wire-brushing away loose mortar, then seal the flue bases with a flexible crown coating.

Crown Coating
If the crown is structurally intact but porous, a crown coating buys years before full replacement is needed. We use a rubberized sealant that bridges hairline cracks and stays flexible through the Bronx’s freeze-thaw cycles. For a Fordham walk-up with a wet boiler room but no visible masonry damage, crown coating is often the fix. It’s also the least expensive intervention we recommend, and we’ll tell you plainly when it’s enough and when it isn’t.

Multi-Flue Cap
This is the Fordham specialty. A multi-flue cap covers two to eight flues under one weatherproof hood, spanning the full stack crown. We install Olympia Chimney multi-flue caps sized and fabricated to the exact stack dimensions. On a 5-story walk-up off East 189th Street near Jerome Avenue, our crew found the building’s original 1920s clay tile flue liners spalling at the top course, leaving the shared stack’s crown cracked around three separate flues. We installed multi-flue caps sized to cover all four apartment boiler flues and rebuilt the crown with a Gelco crack filler system after wire-brushing away the loose mortar, keeping rainwater out of the boiler room below and restoring draft across every line.

Custom Cap
Some Fordham stacks defy standard sizing. Odd flue spacing, narrow parapet clearances, or a stack shared by a chimney and a separate boiler vent often require a custom-fabricated cap. We measure on site, order from Copperfield or Famco, and install when it arrives. You get the spec sheet and the install photos.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fordham

We install and service caps from Famco, Olympia Chimney, and Copperfield. We don’t push one brand. We recommend the cap that fits the stack, the flue configuration, and the exposure. Our materials are sourced through Haven’s buying network specifically to keep customer prices honest. That means a multi-flue cap for a 4-flue Fordham walk-up runs about the same installed price it would in Riverdale or Pelham Parkway. No rooftop surcharge, no “city roof access” line item on the invoice.
Common Chimney Cap & Crown Problems We See in Fordham Homes
- Cross-contamination between shared flues: A single missing cap on a shared stack lets a pigeon nest block one flue, creating negative pressure that pulls carbon monoxide from a neighboring boiler flue into the vacated apartment. This only shows up on a full-stack Level 2 inspection, and it’s the most serious cap failure we find in Fordham.
- Crown cracking from freeze-thaw cycling: Temperatures around Fordham cross 32°F dozens of times each winter. Old crown mortar absorbs moisture, expands, and fails at the stack edge. Spalled brick fragments drop onto lower roof membranes and clog parapet drains, backing water up against the chimney base.
- Water migration through adjacent flues: A cracked crown over one flue allows rain to run down inside that flue, but the dampness shows up as mortar stains or peeling paint in a unit two floors below. Tenants blame the wrong flue. The real leak at the crown goes unfixed for years.
- Undersized or rusted caps on oversized flues: Fordham’s pre-war flues were built for coal. When buildings converted to gas, many caps were never resized. An undersized cap doesn’t cover the flue tile properly, letting rain and debris fall straight down the oversized opening.
Pricing for Chimney Cap & Crown in Fordham, NY

We list prices because that’s the entire point. A standard galvanized cap installation on a single flue in Fordham runs $385-$525. A stainless single-flue cap replacement runs $425-$650. Crown repair with crack filler and sealing runs $600-$1,200 depending on how much loose mortar has to be removed. Crown coating alone runs $450-$850. A multi-flue cap covering four to six flues on a Fordham walk-up stack runs $1,400-$2,400, including measurement, fabrication, and install. Custom caps for odd stack configurations run higher, and we’ll give you the number in writing before you decide anything. Call (980) 580-8641 for a free estimate and we’ll put the full scope on paper.
We Also Serve Cities Near Fordham
Our crews serve Fordham and the surrounding boroughs, including New York City, Brooklyn, Queens, and Manhattan. If your building is near the Fordham border or you manage properties across several neighborhoods, the same crew and the same written price apply. Dispatch and scheduling are coordinated from our New York City office; the technicians working your Fordham roof are background-checked and uniformed, with license information displayed on the page.
Serving Fordham, NY - Our Local Coverage Area

We’re based in the Fordham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Fordham
Yes. Fordham’s 4-to-6-story pre-war buildings often share a single chimney stack containing four to eight separate flues. A missing or cracked cap on one flue lets rain, debris, or nesting material fall into adjacent flues serving other apartments. Worse, a blocked flue creates negative pressure that can pull combustion gases from a neighboring boiler flue into your apartment. This cross-contamination risk is invisible from the street and unique to attached multi-family stacks. If your neighbor won’t act, call (980) 580-8641 and we’ll inspect the full stack and document what’s happening, so you have something concrete to bring to your board or landlord.
We run a camera down each flue and photograph the crown from the rooftop. If the crown has structural cracks wider than a quarter inch, spalled edges, or separation from the flue tile, it needs repair, not coating. If it’s porous but intact, a rubberized crown coating is enough. The difference is visible in the photos we take. You get that photo record on every visit, included under Clause 4 of the Haven Standard. Call (980) 580-8641 and we’ll show you exactly what we’re seeing before we recommend anything.
Yes. We measure and fabricate the multi-flue cap off site, then install it in a single morning or afternoon. Boilers stay running the whole time. We don’t need to disconnect or shut down any building systems to install a cap. The only exception is if the crown repair requires mortar work that has to cure, but even that doesn’t affect boiler operation. Call (980) 580-8641 and we’ll schedule the install around your building’s schedule, not the other way around.
Most pre-war Fordham stacks take a standard multi-flue cap, sized to the stack dimensions and flue spacing. But some stacks, especially those near Jerome Avenue with narrow parapet clearances or odd flue offsets from a century of retrofits, need a custom fabrication. We measure on site and tell you which one you need before you pay anything. The measurement visit is free. Call (980) 580-8641 and we’ll get you a written price either way.
A properly installed cap on every flue in a Fordham shared stack prevents the negative pressure events that pull carbon monoxide from one boiler flue into an adjacent apartment. When one flue is blocked by a nest or debris and the neighboring flue is active, combustion gases can be drawn backward. NYC DOB and fire code enforcement in the Bronx increasingly flags exactly this on multi-family inspections. A full-stack cap and crown assessment, with camera documentation, is the most direct way to reduce that risk. Call (980) 580-8641 and we’ll inspect every flue in your stack, not just the one someone reported.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Fordham under the Haven Standard since 2009.





Before
After
Before
After