Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Broomfield, CO
Chimney cleaning in Broomfield usually costs between $189 and $329 for a standard sweep, and the work here is less about brushing brick than it is about inspecting aging factory-built fireplace systems. Most Broomfield homes were built from 1988 to 2010, which means their zero-clearance fireplaces and metal flue liners are now 20 to 30 years old and often at the end of their rated service life. Add Broomfield’s elevation of roughly 5,400 feet, where thinner air produces less efficient combustion and faster creosote accumulation, and a routine sweep becomes a real inspection on nearly every visit. Corrine Halstead leads our Broomfield work; call (980) 580-8641 for a written price before anyone starts.
Why Broomfield Homes Are Different
Broomfield’s housing stock is dominated by planned-subdivision homes in communities like The Broadlands and Anthem Ranch. Nearly all of them feature factory-built zero-crack zero-clearance fireplaces with metal flue liners rather than traditional brick-and-mortar chimneys. When those units reach the 20-to-30-year mark, the refractory panels inside the firebox start to crack, the firebox seals deteriorate, and the metal liners corrode. That changes the job entirely. We’re not just removing creosote; we’re documenting whether the prefab system is still safe to use at all.
The second thing that makes Broomfield different is wind. Broomfield sits on the exposed Front Range where the plains meet the foothills, and it catches strong prevailing westerlies and chinook downslope events. Those winds create negative pressure that pushes smoke and combustion byproducts back down the flue and into living spaces. In Broomfield’s west-facing subdivisions, many service calls logged as “dirty chimney” turn out to be an absent or undersized chimney cap on a 25-year-old prefab unit oriented directly into the wind. We lead every Broomfield visit with a cap and wind-exposure check before pulling out a brush.
The freeze-thaw cycles here also do real damage. A chinook can swing temperatures 40 to 50 degrees Fahrenheit within hours, and that rapid expansion and contraction cracks chimney crowns and the mortar surrounds on the few masonry units that exist. In Broomfield, a crown check is not a formality; it’s the part of the inspection that catches water intrusion before it reaches the firebox.
Our Main Broomfield Services
Two services generate the most calls from Broomfield homeowners, and each has its own dedicated page with local pricing and detail.
Fireplace Services in Broomfield
Factory-built fireplaces in Broomfield subdivisions like Anthem Ranch and The Broadlands are aging out. Our Fireplace Services in Broomfield page covers refractory panel replacement, gas log service, and full firebox rebuilds on the zero-clearance units that dominate this city. We stock parts for the major prefab brands and document every visit with camera photos under Haven Standard Clause 4.
Chimney Cap & Crown in Broomfield
Chinook winds and freeze-thaw cycles make caps and crowns the first line of defense in Broomfield. Our Chimney Cap & Crown in Broomfield page details cap replacement for wind-exposed flues, crown sealing, and custom cap fabrication. In west-facing subdivisions especially, an undersized cap is often the entire problem.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Broomfield
Chimney sweep in Broomfield is largely a prefab-system inspection disguised as a cleaning. The city’s homes, built mostly between 1988 and 2010, use factory-built fireplaces with metal flue liners that accumulate creosote faster at 5,400 feet of elevation, where lower oxygen means less complete combustion. A standard sweep here should always include a camera look at the liner and refractory panels, because at 20 to 30 years old, those components are usually near the end of their service life. You’ll find our full process on the Chimney Sweep hub page.
Level 1 Inspection
Signs you need it
You use the fireplace regularly and nothing has changed about how it burns, but it hasn’t been looked at in over a year.
What it costs in Broomfield
In Broomfield, a Level 1 inspection typically runs $129 to $199 when paired with a standard sweep.
How we do it
We check the accessible portions of the flue, firebox, damper, and cap by eye and with basic hand tools, then document what we see with photos.
Level 2 Inspection
Signs you need it
You just bought the home, changed fuel type, had a chimney fire, or the fireplace has not been used in several seasons.
What it costs in Broomfield
A Level 2 inspection in Broomfield runs $250 to $450 and includes a camera scan of the full flue interior.
How we do it
We run a camera down the entire flue and through the smoke chamber, looking for cracked refractory panels, corroded metal liners, and hidden blockages, then hand you a documented photo record.
Creosote Removal
Signs you need it
You see black, tar-like buildup on the firebox walls or smell a sharp, smoky odor even when the fireplace is cold.
What it costs in Broomfield
Creosote removal in Broomfield runs $189 to $329 for standard buildup, with heavy Class III glazing pushing toward the higher end.
How we do it
We use rotary brushes and chemical treatments matched to the creosote class, then camera the flue again to confirm the walls are clean.
Soot Removal
Signs you need it
You have a gas fireplace with black film collecting on the glass or logs, or a wood burner with loose, flaky black powder in the firebox.
What it costs in Broomfield
Soot removal alone in Broomfield typically runs $129 to $199 when it does not require heavy creosote treatment.
How we do it
We brush the flue and firebox, vacuum with a HEPA-filtered unit, and check the damper and cap for airflow restrictions.
Annual Sweep
Signs you need it
It’s been more than a year since the last cleaning, or you burn more than a cord of wood per season.
What it costs in Broomfield
An annual sweep in Broomfield runs $189 to $329 and includes a basic visual check of the firebox and cap.
How we do it
We run brushes through the full flue length, remove debris from the smoke shelf and firebox, and document the result with photos under Haven Standard Clause 4.
What Chimney Sweep Costs in Broomfield
| Item | Typical range in Broomfield |
|---|---|
| Standard chimney sweep | $189 - $329 |
| Level 1 inspection (paired with sweep) | $129 - $199 |
| Level 2 inspection (camera scan) | $250 - $450 |
How often should a chimney be swept in Broomfield?
Every year if you burn wood, and every other year for gas fireplaces at minimum. Broomfield’s elevation causes faster creosote buildup than lower-altitude cities, so annual service is the safer default. Call (980) 580-8641 for a written quote.
What does chimney cleaning include in Broomfield?
A full sweep of the flue, removal of debris from the smoke shelf and firebox, a visual check of the cap and damper, and a documented photo record. We never skip the documentation. Call (980) 580-8641 for exact pricing.
Chimney Repair in Broomfield
Chimney repair in Broomfield most often means fixing cracked crowns, spalling brick, and failed flashing on the city’s aging prefab and masonry chimneys. The freeze-thaw cycles that come with chinook wind events crack crowns and mortar quickly, and when water gets behind brick, the damage accelerates through the winter. You’ll find our broader process on the Chimney Repair hub page.
Mortar Repointing
Signs you need it
You can see eroded or missing mortar joints between bricks, or you can scrape sand out of the joints with a fingernail.
What it costs in Broomfield
Mortar repointing in Broomfield typically runs $500 to $1,200 depending on the area to be worked.
How we do it
We grind out the deteriorated mortar, pack in new mortar matched to the existing color and hardness, and seal the surface to slow future erosion.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off, or leaving small piles of red dust at the base of the chimney.
What it costs in Broomfield
Spalling brick repair in Broomfield runs $400 to $900 for isolated areas, with full-face repair going higher.
How we do it
We cut out the damaged bricks, replace them with matched units, and re-point the surrounding joints so water stops entering the wall.
Chimney Waterproofing
Signs you need it
You have efflorescence, a white chalky staining on the brick, or interior dampness after heavy rain.
What it costs in Broomfield
Waterproofing a chimney in Broomfield runs $300 to $600 for a full application.
How we do it
We clean the surface, apply a breathable vapor-permeable sealer, and document the treated area with before and after photos.
Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney or rusted, lifted, or missing flashing at the roofline.
What it costs in Broomfield
Flashing repair in Broomfield runs $350 to $800 depending on access and the amount of metal that needs replacing.
How we do it
We remove the old flashing, install new step and counter flashing, and seal the junction between the roof and chimney to stop water penetration.
Chimney Rebuilding
Signs you need it
The chimney is visibly leaning, bricks are loose across a wide area, or large sections have crumbled after years of freeze-thaw exposure.
What it costs in Broomfield
A partial or full chimney rebuild in Broomfield runs $1,000 to $4,500 depending on how much of the structure must come down.
How we do it
We demolish the damaged section, rebuild the stack with new brick and mortar, and re-flash the top before sealing the entire structure.
What Chimney Repair Costs in Broomfield
| Item | Typical range in Broomfield |
|---|---|
| Mortar repointing | $500 - $1,200 |
| Spalling brick repair | $400 - $900 |
| Chimney waterproofing | $300 - $600 |
Do I need a repair before I can use my fireplace in Broomfield?
If the crown is cracked, the mortar is failing, or the flashing is leaking, yes. Burning with water-damaged masonry accelerates deterioration and can create a fire hazard. Call (980) 580-8641 for a written assessment.
Can freeze-thaw damage be prevented on a Broomfield chimney?
Waterproofing and crown sealing slow it significantly. No sealer stops all damage from 40-degree temperature swings, but a breathable treatment buys years. Call (980) 580-8641 for an exact quote.
Chimney Liner & Rebuild in Broomfield
Chimney liner and rebuild work in Broomfield is heavily skewed toward replacing metal liners in factory-built systems that have reached the end of their 20-to-30-year service life. When a prefab liner corrodes through or a refractory panel cracks, the fireplace can no longer be used safely, and in many cases a full replacement of the liner and firebox components is the only code-compliant fix. You’ll find our broader process on the Chimney Liner & Rebuild hub page.
Stainless Steel Liner
Signs you need it
The existing metal liner has visible corrosion, pinholes, or rust streaks, or the fireplace has been flagged after a Level 2 camera inspection.
What it costs in Broomfield
A stainless steel liner replacement in Broomfield runs $1,800 to $3,800 depending on flue height and access.
How we do it
We measure the flue, source a correctly sized liner from Olympia Chimney or Famco, install it, insulate where required, and camera the finished result.
Flexible Liner
Signs you need it
Your flue takes a bend or offset that a rigid liner cannot follow, or the existing liner has failed at a transition point.
What it costs in Broomfield
A flexible liner installation in Broomfield runs $2,000 to $4,000, with higher figures for taller prefab flues.
How we do it
We feed a continuous flexible liner down the flue path, secure it at the top and base, and pressure-test the connection before firing.
Liner Replacement
Signs you need it
The current liner is cracked, flaking, or pulling away from the flue walls, or the chimney has not been relined in over 25 years.
What it costs in Broomfield
Liner replacement in Broomfield runs $1,800 to $4,500 depending on liner type, flue size, and whether scaffolding is needed.
How we do it
We remove the failing liner, prep the flue, install the new liner with proper terminations, and provide a documented photo record of the completed install.
Partial Rebuild
Signs you need it
The upper portion of the chimney has crumbled or shifted, but the firebox and lower flue are still sound.
What it costs in Broomfield
A partial rebuild in Broomfield runs $1,200 to $3,500 depending on how many courses of brick must come down.
How we do it
We remove the damaged upper section, rebuild it with new brick and mortar, re-flash, and seal the crown before testing the flue.
Full Chimney Rebuild
Signs you need it
The structure is leaning, bricks are loose from top to bottom, and a Level 2 inspection shows failure throughout the flue and firebox.
What it costs in Broomfield
A full chimney rebuild in Broomfield runs $4,000 to $12,000 based on height, access, and whether the firebox must be reconstructed.
How we do it
We take the existing structure down to sound material, rebuild from the firebox up, install a new liner and cap, and document every stage with photos.
What Chimney Liner & Rebuild Costs in Broomfield
| Item | Typical range in Broomfield |
|---|---|
| Stainless steel liner install | $1,800 - $3,800 |
| Flexible liner install | $2,000 - $4,000 |
| Full chimney rebuild | $4,000 - $12,000 |
Do I really need a new liner in Broomfield?
If the camera scan shows corrosion, cracking, or separation, yes. A failed liner lets heat and carbon monoxide reach combustibles around the flue. You’ll see the photos before any work is recommended. Call (980) 580-8641 for a free second opinion.
How long does a liner replacement take in Broomfield?
Most liner replacements are completed in one day. Full rebuilds take longer depending on weather access, and we schedule Broomfield work around chinook wind events when possible. Call (980) 580-8641 for scheduling.
Brands We Service in Broomfield
We service and install parts from Gelco, Olympia Chimney, and Famco, with common Broomfield prefab components stocked locally for faster turnaround. Our our brands page lists the full range. If a liner or cap must come from a distributor, Broomfield jobs are typically completed within a week.
Pricing for Chimney Cleaning in Broomfield, CO
| Service | Typical range in Broomfield |
|---|---|
| Standard chimney sweep | $189 - $329 |
| Level 1 inspection (paired with sweep) | $129 - $199 |
| Level 2 inspection (camera scan) | $250 - $450 |
| Soot removal (gas fireplace) | $129 - $199 |
| Mortar repointing | $500 - $1,200 |
| Chimney waterproofing | $300 - $600 |
| Flashing repair | $350 - $800 |
| Stainless steel liner install | $1,800 - $3,800 |
| Flexible liner install | $2,000 - $4,000 |
| Partial chimney rebuild | $1,200 - $3,500 |
| Full chimney rebuild | $4,000 - $12,000 |
The big price movers in Broomfield are access and wind. Homes in west-facing subdivisions with steep roof pitches or chimneys that require ladder work over uneven terrain cost more to service than ground-level units. Regardless of the job, every quote is written before work starts, and no work proceeds until you have seen the price, the scope, and the warranty in writing under Haven Standard Clause 1.
Neighborhoods We Serve in Broomfield
We cover the full Broomfield area, including the following neighborhoods and surrounding subdivisions. Most Broomfield jobs can be scheduled within five to seven business days, depending on the season.
- The Broadlands
- Anthem Ranch
- McKay Landing
- Broomfield Heights
- Westlake Village
Service Area - Cities Near Broomfield
While Broomfield is our focus for this page, our crews also cover the surrounding Front Range communities. Homeowners in Lafayette, CA, Louisville, CO, Thornton, CO, and Westminster, CA can reach us at the same number for written pricing and inspection scheduling.
Serving Broomfield, CO - Our Local Coverage Area
We’re based in the Broomfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Broomfield
Most chimney cleanings and inspections do not require a permit in Broomfield. Full rebuilds and liner replacements sometimes trigger a building permit depending on scope, and we handle that paperwork for you. Call (980) 580-8641 and we’ll tell you what your job needs.
Many Broomfield subdivisions, including The Broadlands and Anthem Ranch, have HOA covenants that govern exterior changes. A chimney cleaning or inspection rarely needs HOA approval, but a full rebuild or visible cap change might. We can help you check before work is scheduled.
Most Broomfield appointments are scheduled within five to seven business days. During the fall rush before heating season, lead times extend, so booking early is the safest way to get the date you want. Call (980) 580-8641 and our live dispatch will find the next opening.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Broomfield Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.