Olympia Chimney Chimney Liner & Rebuild Nationwide

Olympia Chimney Chimney Liner & Rebuild in New York City: What to Know First

We provide independent Olympia Chimney chimney liner and rebuild work across all five boroughs of New York City, typically completing a stainless steel liner replacement in one day and a full flue rebuild within three to five working days. A straightforward Olympia Chimney liner swap in New York City runs between $1,800 and $4,200, while a full rebuild with new flue tile, crown, and flashing lands between $6,500 and $14,000 depending on roof access, chase condition, and how much of the original clay tile survived. You’ll get a written price before anything starts. That’s the point of this page.

Call (980) 580-8641

This page is for homeowners who bought a place with an Olympia Chimney system already installed, or who had one specified on an estimate, and now need honest answers about liner repair or rebuild. Call (980) 580-8641 and a live person answers.

How Olympia Chimney Products Fail - and How We Fix Them

• Clay tile liners on older Olympia Chimney flue systems develop vertical cracks from New York City’s freeze-thaw cycle. We see this most on homes in Washington Heights, Riverdale, and Staten Island where heating seasons run long and flues stay hot for months. The crack lets creosote vapor press into the chase. Our fix: a stainless steel liner from Olympia Chimney’s contemporary liner line, or a DuraFlex equivalent, sized after a camera measurement of the actual flue ID, not a guess from the cap.
• Stainless steel Olympia Chimney liners in pre-2012 installations often show pitting near the first flue tile joint. That’s condensation from oversized furnaces short-cycling. The liner cools too fast, acidic condensate pools, and the alloy thins. We run a camera down the full length and measure wall thickness with a gauge. If it’s under 0.016 inches anywhere, we replace rather than patch. Patching a pitted liner is money thrown at a future problem.
• Olympia Chimney flexible liner connectors pull apart at the appliance collar in NYC brownstones and prewar buildings. The building settles. The connector doesn’t. We see the gap on camera before anyone smells anything. A loose connector at the furnace or boiler means the flue can’t draft and carbon monoxide has a shorter path into the living space. We replace with a rigid connector section that bolts to the appliance, then test draw with a manometer before we call the job done.
• Damper assemblies on older Olympia Chimney installations warp and stop sealing. That’s a liner rebuild trigger when combined with flue tile damage. If the damper frame is sound, we replace the damper plate. If the frame is rusted through, a liner reinstallation is the honest call. No reason to band-aid a damper while the flue above it is spalling.
• Olympia Chimney crown and wash failures are common where the original install used a thin mortar wash instead of a formed concrete crown with a drip edge. Water gets behind the liner termination point and freezes against the clay tile. Spalling follows. On rebuilds, we pour a new crown with a drip edge and secure the liner to it with a storm collar, then seal with Gelco high-temp sealant. The camera record from the original install is usually when we first catch this, which is why Clause 4 of the Haven Standard exists.

Our Olympia Chimney Chimney Liner & Rebuild Process

1. 1
   Call and book. A live person answers at (980) 580-8641. We schedule a window that works for you, and we text when the tech is on the way. The tech’s name and license number are on the confirmation.
2. 2
   Camera inspection first, always. We run an NFPA 211 Level 2 camera scan down the full flue before touching a single brick. We don’t quote liner work off a flashlight look from the roof. You see the footage when we’re done.
3. 3
   Written scope and price. We hand you a written price, written scope, and written warranty before any work starts. That’s Haven Standard Clause 1. If the liner can wait, we tell you it can wait. We don’t sell rebuilds on fear.
4. 4
   Parts decision. If this is an Olympia Chimney system, we tell you when an OEM Olympia Chimney liner is the right call and when a DuraFlex or HeatShield liner does the same job for less. We don’t force brand loyalty at your expense. We source through Haven’s buying network to keep material costs honest.
5. 5
   The work. Liner removal, flue prep, new liner drop, connector work, crown pour if needed, and damper replacement if called for. For full rebuilds in New York City, roof access on brownstones and attached rows means we stage materials early and keep neighbors clear. Permits pulled where the DOB requires.
6. 6
   Test and documentation. We fire the appliance, check draft with a manometer, and run the camera once more. You get photos, camera footage, and your written warranty before we leave. The camera doesn’t soften what it finds. Neither do I.

Before

After

What Olympia Chimney Chimney Liner & Rebuild Costs in New York City

Real numbers, not a callback song:

• Stainless steel liner replacement (Olympia Chimney or DuraFlex flexible liner): $1,800 to $4,200, depending on flue height and roof access.
• Liner replacement plus damper plate and connector repair: $2,400 to $5,100.
• Partial rebuild (top 3 to 5 feet of flue tile plus new crown): $3,800 to $6,900.
• Full chimney rebuild with new flue tile, liner, crown, flashing, and brickwork: $6,500 to $14,000.
• Camera inspection and documented photo record: included on every visit under Haven Standard Clause 4. Not an add-on.

What moves the price: how much clay tile survived, whether the chase or brickwork needs repointing, roof slope and staging access, and whether we’re working around an active appliance. Estimates are free and written in plain English. Call (980) 580-8641.

Why New York City Homeowners Call Emberly Chimney Cleaners for Olympia Chimney Work

Because we’ll show you the camera footage and put the number on the table before we ask for a dime. That’s been the practice since 2009, and it became Clause 4 of the Haven Standard. Over 38,000 chimneys inspected and cleaned since then, every one with a written price before work started and a documented record when it was done. Our techs know Olympia Chimney liner failure modes because they’ve pulled enough of them out of NYC brownstones to recognize the pattern in ten minutes. If your system needs a liner and Olympia Chimney’s current line doesn’t fit the budget, we’ll tell you what a DuraFlex, HeatShield, or Gelco option costs and let you decide. We’re an independent Olympia Chimney service provider, not a brand outlet, and our only loyalty is to the flue. The 365-Day Done Right Promise applies to every rebuild we do. If it’s not done right, we make it right.

FAQs