Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Beverly Hills, CA
Chimney cleaning in Beverly Hills typically costs $189-$329 and is driven by inspection and certification requirements rather than heavy creosote buildup, because most of the city’s original 1920s-1940s fireplaces run on gas inserts that rarely burn wood. The real work here is verifying that a 90-year-old flue is safe to sign off on, which is why our camera-scan Level 2 inspection is included on every visit at no separate charge. If you own a Mediterranean Revival or Tudor estate in the flats or hills, call (980) 580-8641 and we’ll give you a written price before anything starts.
Why Beverly Hills Homes Are Different
Beverly Hills is a city of showpiece fireplaces that almost never get lit. SCAQMD Rule 445 restricts wood burning across the LA basin, so the original fireboxes in the Spanish Colonial Revival and Mediterranean mansions south of Sunset sit idle most of the year. What builds up isn’t creosote, it’s debris: European Starlings and roof rats nesting in dormant flues, Jacaranda and Ficus leaf litter accumulating on smoke shelves, and fine dust from 10 months of non-use. Then Santa Ana winds hit in October and November, creating negative-pressure backdrafts that pull that debris down through long-sealed fireboxes and into the living room.
The second difference is regulatory. Beverly Hills runs its own fire marshal, separate from LAFD, and the locally amended Beverly Hills Fire Code gets applied to fireplace certifications during escrow and renovation permits. A chimney cleared by a contractor working to LA City standards may not satisfy what the Beverly Hills building department requires to close a transaction. That’s why we document everything with camera footage and a written photo record on every job under Clause 4 of the Haven Standard.
Our Main Beverly Hills Services
Two services dominate in Beverly Hills. The first is the certification-driven inspection and cleaning that escrow attorneys and buyers’ agents require, and the second is the architectural repair work these century-old flues and caps demand.
Fireplace Services in Beverly Hills
The original fireplaces in Beverly Hills homes are architecturally significant and, in most cases, never designed for the gas inserts that now occupy them. We service those inserts, replace refractory panels and gas log sets, and trace ignition failures back to their actual cause rather than swapping parts blindly. A 1930s fireplace retrofitted with a gas log set creates condensation and liner mismatch issues that a basic service call won’t catch. Our camera-scan approach shows you exactly what’s happening before we quote a repair. Full details on Fireplace Services in Beverly Hills.
Chimney Cap & Crown in Beverly Hills
The ornate terracotta caps on Beverly Hills’ older mansions are beautiful and fragile. They crack under decades of heat cycling, and a broken cap is an open invitation to the birds, rats, and Santa Ana debris that plague dormant flues in this city. We repair and replace caps, repour crowns with the correct slope and overhang, and match architectural style rather than slapping on a generic stainless cover. If you’re seeing rust, cracked crown mortar, or missing cap sections, Chimney Cap & Crown in Beverly Hills covers what we do and what it costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cleaning & Sweep in Beverly Hills
Chimney cleaning and sweep work in Beverly Hills is less about shoveling out creosote and more about documenting that a flue is safe, clean, and code-compliant for a buyer, an insurer, or a Beverly Hills building department sign-off. The original clay-tile flues in 1920s-1940s Mediterranean and Tudor homes were never sized for modern gas inserts, which means moisture, condensation, and invisible deterioration that only a camera scan catches. We perform every cleaning as a Chimney Cleaning & Sweep under NFPA 211 Level 2 standards, with a written photo record you keep.
Level 1 Inspection
Signs you need it
You burn the fireplace occasionally and want the basic annual check that nothing has changed since last year.
What it costs in Beverly Hills
A Level 1 inspection in Beverly Hills typically runs $189-$269, often bundled with a standard sweep.
How we do it
We verify the flue is unobstructed, check all accessible portions of the fireplace and chimney, and provide a written condition report with photos.
Level 2 Inspection
Signs you need it
You’re buying or selling a Beverly Hills home, or you’ve had a chimney fire, a seismic event, or a significant weather hit.
What it costs in Beverly Hills
Level 2 inspection in Beverly Hills runs $289-$429 and includes the full camera scan of the flue interior.
How we do it
We run a video camera down the entire flue and through the smoke chamber, checking for hidden cracks, liner gaps, and moisture intrusion, then hand you the footage and a written report.
Creosote Removal
Signs you need it
You can see dark, shiny buildup on the firebox walls or you smell a strong, tar-like odor near the fireplace even when it’s cold.
What it costs in Beverly Hills
Creosote removal in Beverly Hills runs $229-$379, depending on buildup class and flue length.
How we do it
We run rotary brushes down the full flue length, then chemically treat Class II and Class III creosote and document the result with before-and-after camera shots.
Soot Removal
Signs you need it
Fine black dust collects on the mantel and hearth within days of a burn, or the gas log set is leaving heavy soot on the firebox walls.
What it costs in Beverly Hills
Soot removal in Beverly Hills runs $189-$249 for a gas fireplace, more if the flue itself is heavily coated.
How we do it
We clean the firebox, remove soot from the smoke shelf and damper assembly, and check the gas log set for proper air-to-fuel ratio to stop the sooting at the source.
Annual Sweep
Signs you need it
It’s been more than 12 months since the last cleaning, or you’ve just bought the home and have no service record for the chimney.
What it costs in Beverly Hills
An annual sweep in Beverly Hills runs $189-$329 and includes the inspection and photo report as standard.
How we do it
We sweep the full flue, clean the firebox and smoke shelf, check the cap and crown for storm damage, and document everything with photos before we leave.
What Chimney Cleaning & Sweep Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Level 1 Inspection | $189-$269 |
| Level 2 Inspection with camera scan | $289-$429 |
| Standard sweep with inspection | $189-$329 |
| Creosote removal (Class II-III) | $229-$379 |
How often should a chimney be cleaned in Beverly Hills?
Even unused gas-fireplace flues need an annual check here because of nesting birds, roof rats, and Santa Ana debris. The NFPA standard is a sweep when buildup reaches 1/8 inch; in a Beverly Hills flue sitting idle 10 months a year, we recommend at least a camera-scan inspection annually.
Do I need a Level 2 inspection to sell my Beverly Hills home?
If your buyer’s agent, escrow attorney, or the Beverly Hills building department requests chimney certification, you need a Level 2 camera inspection. Most transactions in this market require one. We provide the written report, footage, and sign-off documentation your escrow officer will ask for.
Chimney Repair in Beverly Hills
Chimney repair in Beverly Hills is usually a discovery made during a Level 2 inspection, not an emergency someone calls about. The original single-wythe clay-tile flues and soft mortar joints in 1920s-1940s Spanish Colonial and Tudor homes deteriorate invisibly for decades, and the first sign is often spalling brick or a failed flashing that lets water behind the stucco. What looks like a small cosmetic crack at the crown is frequently a symptom of deeper structural movement in the stack. We repair what the camera shows us, and every Chimney Repair job starts with a written price.
Mortar Repointing
Signs you need it
You can scrape crumbling mortar from between bricks with a fingernail, or the chimney exterior looks dusty and weathered.
What it costs in Beverly Hills
Mortar repointing in Beverly Hills runs $850-$1,600 for a typical chimney stack, depending on height and access.
How we do it
We grind out deteriorated joints to the correct depth, match the original mortar color and composition where possible, and repoint with a weather-appropriate mix that meets current code.
Spalling Brick Repair
Signs you need it
Brick faces are flaking, popping off, or leaving brick chips on the roof or patio below the chimney.
What it costs in Beverly Hills
Spalling brick repair in Beverly Hills runs $950-$1,800 per section, more if structural brick replacement is required.
How we do it
We identify the moisture source causing the spall, replace or rebuild the damaged brick section, and waterproof the repaired area with a vapor-permeable sealer.
Chimney Waterproofing
Signs you need it
Visible efflorescence, dark water stains on the chimney exterior, or interior dampness around the firebox after rain.
What it costs in Beverly Hills
Chimney waterproofing in Beverly Hills runs $450-$950 and should follow any brick or mortar repair.
How we do it
We apply a vapor-permeable silane-siloxane waterproofing treatment that sheds water without trapping moisture in the brick, then document the coverage with photos.
Flashing Repair
Signs you need it
Water stains on interior ceilings near the chimney, damp drywall around the fireplace, or visible rust and lifting metal at the roof line.
What it costs in Beverly Hills
Flashing repair in Beverly Hills runs $650-$1,400, depending on whether we replace the step flashing, counter-flashing, or both.
How we do it
We remove the old flashing, inspect the underlying roof deck for rot, install new step and counter-flashing that meets current code, and seal all junctions with the correct sealant.
Chimney Rebuilding
Signs you need it
The chimney visibly leans, a significant section of brick has failed, or a camera inspection shows flue collapse or severe structural compromise.
What it costs in Beverly Hills
Partial chimney rebuilding in Beverly Hills runs $3,000-$7,500; a full tear-down and rebuild starts around $8,000.
How we do it
We rebuild the stack from the roofline up or from the firebox up as required, reusing architecturally significant brick where possible and installing a new flue liner and proper crown.
What Chimney Repair Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Mortar repointing | $850-$1,600 |
| Spalling brick repair | $950-$1,800 |
| Chimney waterproofing | $450-$950 |
| Flashing repair | $650-$1,400 |
| Chimney rebuilding (partial) | $3,000-$7,500 |
Can a cracked chimney be repaired, or does it always need a rebuild?
Most cracks in the crown, mortar joints, and flashing can be repaired without rebuilding, and that’s the more common outcome in Beverly Hills. A camera inspection determines whether the structural integrity of the stack is affected. Call (980) 580-8641 and we’ll show you the footage.
Why do chimney repairs cost more in Beverly Hills than other parts of LA?
Access on hillside estates and the architectural significance of original brick and terracotta demand slower, more careful work. Matching 1930s materials and meeting the Beverly Hills Fire Code adds labor steps a standard suburban chimney doesn’t require.
Chimney Liner & Rebuild in Beverly Hills
Chimney liner work in Beverly Hills almost always traces back to the same story: a 1920s-1940s home with an original unlined or single-wythe clay-tile flue that was retrofitted with a gas insert it was never sized for. The condensation from that gas insert corrodes the old clay and creates gaps in the flue, which is a carbon monoxide risk and a code violation under the Beverly Hills Fire Code. We install stainless liners from Chimney Liner & Rebuild materials like DuraFlex and HeatShield, sized and listed for the exact appliance you’re venting.
Stainless Steel Liner
Signs you need it
Your camera inspection shows missing or cracked clay tile sections, or you’re switching from a gas log set back to a wood-burning or high-efficiency fireplace.
What it costs in Beverly Hills
A stainless steel liner installation in Beverly Hills runs $2,800-$5,500, including the liner, insulation, and top plate.
How we do it
We size the liner to the appliance and flue diameter, install it top-down with insulation as required, and document the full run with camera footage.
Flexible Liner
Signs you need it
Your flue has offset bends or a multi-story run that a rigid liner can’t navigate without significant demolition.
What it costs in Beverly Hills
A flexible liner installation in Beverly Hills runs $2,800-$5,200, similar to rigid stainless depending on the run length.
How we do it
We pull the flexible liner through the existing flue path, secure it at the top and bottom, insulate as required, and test for proper draft after installation.
Liner Replacement
Signs you need it
Your current liner is rusted through, perforated, or no longer correctly sized for the appliance it vents.
What it costs in Beverly Hills
Liner replacement in Beverly Hills runs $2,800-$5,500, with the old liner removed before the new one goes in.
How we do it
We extract the old liner, clean the flue thoroughly, and install a new liner matched to the appliance, then test draft and provide full camera documentation.
Partial Rebuild
Signs you need it
The top section of the chimney is spalling, cracked, or leaning, but the lower stack is structurally sound.
What it costs in Beverly Hills
A partial rebuild in Beverly Hills runs $3,000-$7,500, and most partial rebuilds include a new liner section at the top.
How we do it
We tear down the damaged upper stack, rebuild it with code-compliant materials that match the home’s architecture, and install a proper crown and cap.
Full Chimney Rebuild
Signs you need it
The chimney has failed structurally end to end, or a camera inspection shows flue collapse and widespread brick and mortar failure throughout.
What it costs in Beverly Hills
A full chimney rebuild in Beverly Hills starts at $8,000 and runs up from there based on height, access, and material matching.
How we do it
We tear down the entire stack and rebuild it with new brick or block, a correctly sized liner, proper flashing, and a poured crown, then document every stage with photos.
What Chimney Liner & Rebuild Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| Stainless steel liner | $2,800-$5,500 |
| Flexible liner | $2,800-$5,200 |
| Liner replacement | $2,800-$5,500 |
| Partial rebuild | $3,000-$7,500 |
| Full chimney rebuild | $8,000+ |
Do I actually need a new liner, or can I just keep using the old one?
If the camera scan shows missing, cracked, or perforated clay tile, no patch or coating will satisfy the Beverly Hills building department at sign-off. A compromised liner is a carbon monoxide path into the house. We’ll show you the footage, and if the liner is still sound, we’ll tell you that plainly and in writing.
How long does a liner installation take in Beverly Hills?
Most stainless or flexible liner jobs are done in one day. A partial or full rebuild can run three to seven days depending on height and material matching. We schedule a specific crew for your home and send a text when they’re on the way.
Brands We Service in Beverly Hills
We install and service parts from DuraFlex, HeatShield, and Copperfield, and keep common liner sizes and cap components stocked locally for fast turnaround on Beverly Hills jobs. If you have a preferred manufacturer or need a specific listing for a high-efficiency appliance, our brands page shows everything we work with.
Pricing for Chimney Cleaning in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Chimney cleaning & sweep (standard) | $189-$329 |
| Level 1 inspection | $189-$269 |
| Level 2 inspection with camera scan | $289-$429 |
| Creosote removal | $229-$379 |
| Soot removal (gas fireplace) | $189-$249 |
| Mortar repointing | $850-$1,600 |
| Chimney waterproofing | $450-$950 |
| Flashing repair | $650-$1,400 |
| Stainless steel liner | $2,800-$5,500 |
| Partial rebuild | $3,000-$7,500 |
| Full chimney rebuild | $8,000+ |
What pushes a Beverly Hills chimney job to the top of the range is access: hillside properties with steep roof pitches, second-story stacks with no safe ladder point, and flues where matching original terracotta or vintage brick is non-negotiable. Your written price includes everything, down to the last cap screw, before we start, and no work proceeds until you’ve seen it in writing under Clause 1 of the Haven Standard.
Neighborhoods We Serve in Beverly Hills
We work throughout Beverly Hills and the surrounding area, from the flats south of Sunset to the older hillside estates. If you’re not sure whether we cover your street, call (980) 580-8641 and we’ll confirm on the spot. Dispatch and scheduling are coordinated from our Los Angeles office; our crews serve Beverly Hills locally.
- The Flats (south of Sunset)
- Trousdale Estates
- Beverly Hills Gateway
- The Golden Triangle
- Beverly Park
Service Area - Cities Near Beverly Hills
Emberly Chimney Cleaners operates across the greater Los Angeles metro, and we regularly send crews to homes in West Hollywood, CA, Studio City, CA, Universal City, TX, and Culver City, CA. If you’re in one of these communities or anywhere nearby, call (980) 580-8641 and we’ll schedule your camera-scan inspection and written estimate.
Serving Beverly Hills, CA - Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Beverly Hills
We can usually get a technician to a Beverly Hills home within three to five business days, and faster during escrow crunches if your agent flags the inspection as time-sensitive. Call (980) 580-8641 and our live dispatcher will give you real availability, not a web-form wait.
Structural repairs and rebuilds generally require a permit through the Beverly Hills building department, and the local fire code standards apply to any fireplace certification. Cleaning, sweeping, and inspections are routine service calls that don’t require a permit.
If your chimney is visible from the street, most Beverly Hills HOAs want approval on any exterior change like a cap replacement or rebuild. We’ll supply the spec sheet, photos, and written scope your HOA board or design-review committee requests, and flag any approvals you’ll need before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.