Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Redford, MI
Chimney cleaning in Redford, MI typically costs $159-$249 for a standard sweep with a Level 1 inspection, and most jobs take 60-90 minutes from setup to final photo report. Redford’s housing stock makes this work different: nearly every chimney here is original 1940s-1960s brick construction with clay flue tiles that were often sized for oil or coal furnaces, not today’s gas appliances. Those oversized flues collect creosote and acidic condensate in ways newer suburbs simply don’t see. Call (980) 580-8641 and we’ll give you a written price before anyone rings your doorbell.
Why Redford Homes Are Different
Redford Township is a grid of compact brick ranches and Cape Cods built between roughly 1945 and 1965. The chimneys on these homes are almost all original masonry: single-flue designs with clay tile liners, shallow mortar joints, and crowns poured with the concrete mixes of that era. The freeze-thaw cycling across metro Detroit, where winter temperatures swing past 32°F dozens of times, drives water into hairline cracks, expands it, and spalls the brick face before you ever see damage from the yard.
The bigger issue is what those flues were built for. A large share of Redford chimneys originally vented oil-fired or coal-burning furnaces. When homeowners switched to gas decades ago, the old 12×12 clay-tile flue was often left in place and “adopted” for a 4-inch gas appliance. That mismatch pools condensation inside the tile, accelerates cracking, and creates chronic backdrafting. It’s why so many Redford jobs that start as routine cleanings turn into liner replacement estimates. The chimney is doing exactly what a 60-year-old oversized flue should be expected to do. We document it with a camera so you can see it too.
Our Main Redford Services
Beyond cleaning and repair, Redford homeowners call us most often about two things: fireplaces that smoke back into the living room, and caps or crowns that have let water into the chase. Both are tied to the township’s aging brick stock.
Fireplace Services in Redford
Most Redford fireplaces are original masonry fireboxes with shallow smoke chambers and dampers that haven’t sealed properly in years. We inspect the firebox, damper, and smoke shelf with a camera, then give you a written scope before any repair. If the fireplace smokes on startup, it’s often a drafting issue tied to that oversized flue, not the firebox itself. See Fireplace Services in Redford for the full breakdown.

Chimney Cap & Crown in Redford
The poured concrete crowns on Redford’s postwar chimneys are usually original, and most show spalling or full-thickness cracks by now. A cracked crown lets water run straight into the flue chase and the brick below it. We replace crowns, install or repair chimney caps, and waterproof the exposed masonry. See Chimney Cap & Crown in Redford for pricing and signs to watch for.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Sweep in Redford

Chimney sweep in Redford means removing creosote and soot from a flue that was likely built before gas furnaces existed, then checking whether that flue is still safe for what’s venting through it now. Most Redford homes have one flue that served a combination heating and fireplace load, so a cleaning here almost always includes a close look at whether the clay liner is degrading faster than it should. We perform every cleaning to NFPA 211 Level 2 camera-scan standards because the township’s housing age demands it. That’s the same standard behind our Chimney Sweep service hub.
Level 1 Inspection
Signs you need it
You use your fireplace or wood stove regularly and just need the annual check that confirms everything is still venting correctly.
What it costs in Redford
A Level 1 inspection in Redford runs $159-$249 and is included with every standard chimney cleaning.
How we do it
We check accessible portions of the flue, damper, firebox, and exterior masonry, then hand you a written condition report with photos.
Creosote Removal
Signs you need it
You see black, crusty buildup on the damper or firebox walls, or you smell a sharp, smoky odor even when the fireplace is cold.
What it costs in Redford
Creosote removal falls inside the $159-$249 standard sweep price for normal buildup; heavy Class III glaze runs higher and is quoted before we start.
How we do it
We run rotary brushes sized to your flue, then camera-scan the full length to confirm the walls are clean and the liner is still intact.
What Chimney Sweep Costs in Redford
| Item | Typical range in Redford |
|---|---|
| Chimney sweep with Level 1 inspection | $159-$249 |
| Level 2 camera inspection (full flue scan) | $249-$349 |
| Heavy creosote removal (Class III glaze) | $300-$500 |
How often should a Redford chimney be swept?
Once a year if you burn wood regularly, and at least every two years for gas-only flues. Redford’s oversized clay liners collect condensate that accelerates creosote bonding, so annual cleaning is the safer schedule. Call (980) 580-8641 to book.
Do I really need a camera inspection with my sweep?
In Redford, yes. The housing stock is old enough that a visual sweep often misses liner cracks that are already leaking flue gas. Our camera scan is included and documented in your photo record. Call (980) 580-8641 for a written quote.
Chimney Repair in Redford

Chimney repair in Redford usually means addressing what freeze-thaw has done to 60-to-80-year-old brick and mortar. The township’s original chimneys were built with shallow joints and softer brick than modern code allows, and decades of Michigan winters have opened cracks that let water in and flue gas out. We quote every repair in writing before any work starts, and we hand you a documented photo record when it’s done. That’s the standard behind our Chimney Repair service hub.
Mortar Repointing
Signs you need it
You can scrape crumbling mortar out of the joints with a fingernail, or you see gaps between bricks where water is clearly getting in.
What it costs in Redford
Repointing in Redford typically runs $800-$1,800 depending on how many courses of brick need joint work.
How we do it
We grind out deteriorated joints to a consistent depth, pack in fresh mortar matched to your existing color, and seal the face against water entry.
Flashing Repair
Signs you need it
You have water staining on the ceiling near the chimney, or you see rusted, lifted, or missing flashing at the roofline.
What it costs in Redford
Flashing repair in Redford runs $400-$900 for typical roof-to-chimney joint work.
How we do it
We remove old flashing, inspect the roof deck beneath, install new step and counter flashing, and seal all terminations.
What Chimney Repair Costs in Redford
| Item | Typical range in Redford |
|---|---|
| Mortar repointing | $800-$1,800 |
| Spalling brick repair | $500-$1,500 |
| Flashing repair | $400-$900 |
Can a cracked chimney be safely ignored for one season?
Not in Redford. Freeze-thaw will push water into any open crack and widen it every winter cycle. A small repointing job becomes a rebuild if you wait. Call (980) 580-8641 for a camera-backed assessment.
Will my homeowner’s insurance cover chimney repair in Redford?
It depends on the cause. Sudden damage like a falling limb is often covered; long-term water intrusion from neglected mortar is not. We provide the photo documentation insurers want either way. Call (980) 580-8641 to schedule an inspection.
Chimney Liner & Rebuild in Redford

Chimney liner and rebuild work in Redford is usually the end result of that original oil-furnace flue being asked to vent a modern gas appliance it was never sized for. The 12×12 clay-tile flues common across the township pool condensate, crack under thermal stress, and eventually fail entirely. When we recommend a liner, you’ll see the camera footage that made us recommend it before any quote is written. That’s the practice behind our Chimney Liner & Rebuild service hub.
Stainless Steel Liner
Signs you need it
Your camera inspection shows cracked or missing clay tile sections, or you’re venting a gas appliance through an oversized flue that’s condensing heavily.
What it costs in Redford
A stainless steel liner installed in Redford typically runs $2,500-$4,500 depending on flue height and access.
How we do it
We size the liner to the appliance, insulate it where code requires, drop it down the flue, and connect it with a proper top plate and cap.
Partial Rebuild
Signs you need it
The top few courses of brick are spalled, loose, or missing, but the lower chimney structure is still sound and level.
What it costs in Redford
A partial rebuild in Redford runs $1,500-$3,500 for the typical above-roofline section.
How we do it
We tear down to sound brick, rebuild with matched materials, pour a new crown, and waterproof the finished work.
What Chimney Liner & Rebuild Costs in Redford
| Item | Typical range in Redford |
|---|---|
| Stainless steel liner | $2,500-$4,500 |
| Flexible liner | $2,000-$3,800 |
| Partial rebuild | $1,500-$3,500 |
How do I know if I really need a new liner in Redford?
You should only make that call after a camera scan. If the footage shows cracked tile, spalling, or heavy condensation damage, the liner has failed. We never recommend replacement without showing you the images. Call (980) 580-8641.
What happens if I keep burning with a cracked liner?
Flue gas and carbon monoxide can leak into the wall cavity or living space. In Redford’s older brick chimneys, those cracks often run through multiple flue sections before any exterior sign shows. Call (980) 580-8641 to schedule a Level 2 inspection.
Brands We Service in Redford

We install and service liners and components from DuraFlex, HeatShield, and Copperfield, and we keep the most common Redford replacement parts stocked locally for faster turnaround. See our brands for the full list and warranty details.
Pricing for Chimney Cleaning in Redford, MI
| Service | Typical range in Redford |
|---|---|
| Chimney sweep with Level 1 inspection | $159-$249 |
| Level 2 camera inspection | $249-$349 |
| Heavy creosote removal | $300-$500 |
| Mortar repointing | $800-$1,800 |
| Spalling brick repair | $500-$1,500 |
| Flashing repair | $400-$900 |
| Chimney waterproofing | $600-$1,200 |
| Stainless steel liner | $2,500-$4,500 |
| Flexible liner | $2,000-$3,800 |
| Partial rebuild | $1,500-$3,500 |
| Full chimney rebuild | $8,000-$15,000 |
In Redford, prices push higher when the flue has heavy creosote glaze, the chimney is tall enough to require additional roof staging, or the brick has spalled badly enough to need more than straightforward repointing. Every quote is written and delivered before any work starts, and it includes the full scope and warranty in the same document.
Neighborhoods We Serve in Redford

We work throughout Redford Township, from the older brick-ranch blocks near Beech Daly and Five Points to the Cape Cod streets north of Schoolcraft. Our crews typically schedule Redford jobs within a week, and we send a text with a named tech before we head your way.
- Five Points area
- Beech Daly corridor
- North Redford
- East Redford
- Redford Union area
Service Area - Cities Near Redford
We serve homeowners across the west and southwest Detroit metro, including Livonia, MI, Westland, MI, Southfield, MI, and Dearborn, MI. If you’re just outside Redford, call and we’ll confirm coverage and schedule from our Detroit dispatch.
Serving Redford, MI - Our Local Coverage Area

We’re based in the Redford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Redford
Most Redford appointments are scheduled within a week, and we text you with the assigned technician’s name before arrival. If you have an urgent concern like water pouring through the chimney chase, call (980) 580-8641 and we’ll prioritize it.
Most routine cleaning and liner replacement doesn’t require a township permit, but a full rebuild or structural change may. We’ll tell you what’s needed for your specific scope in writing before work starts. Call (980) 580-8641.
Emberly Chimney Cleaners is independently owned and operated under the Haven Standard, with dispatch coordinated from our Detroit office and crews serving Redford locally. Every job includes a written price and documented photo record. Call (980) 580-8641.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Redford Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.





Before
After
Before
After