Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Georgetown, TX
Chimney cleaning in Georgetown, TX typically costs between $189 and $320 for a standard sweep with a Level 1 inspection, and most jobs are completed in about an hour. The work here is shaped by two things: thousands of Sun City Texas homes built since the late 1990s with fireplaces that sit idle through long warm stretches, and sudden Balcones Escarpment cold snaps that send homeowners to the hearth with a flue that hasn’t been checked in years. That combination means our Georgetown jobs lean heavily on creosote removal and animal-nesting cleanup. Call (980) 580-8641 and we’ll give you a written price before anyone steps inside.
Why Georgetown Homes Are Different
Georgetown splits into two housing eras that demand different things from a chimney company. The Victorian-era brick and limestone homes around the downtown square were built tight and narrow, with masonry flues that have now seen 80 to 130 years of Texas weather. The other half of the city grew up after 2000: Wolf Ranch, Georgetown Village, Parkside at Mayfield Ranch, and the enormous Sun City Texas development, where 7,000-plus homes carry factory-built zero-clearance fireplace units now hitting 15 to 20 years old, which is first-service age for those inserts.
The climate does something particular here. Georgetown sits near the Balcones Escarpment, and winter northers push through fast and hard. A homeowner lights a fire they haven’t used in eight months, the firebox never reaches proper draft temperature, and the short burn leaves a sticky, shiny creosote glaze on the flue walls. Then spring arrives with chimney swifts, which are federally protected under the Migratory Bird Treaty Act. They nest in Georgetown chimneys from roughly April through October, and we routinely find flues that were capped but never damper-sealed, packing nesting debris against the damper plate where it becomes the first thing to ignite in November.
The owner profile matters too. Sun City Texas is one of the largest Del Webb 55+ communities in the country, and many residents relocated from northern states where a fireplace meant a full winter of use. Here, they burn a handful of times a year, and the expectation gap means chimneys go longer between cleanings than they would in Chicago or Minneapolis. A flue with years of stage-one creosote and a dried-out bird’s nest is not rare in Georgetown. It’s the standard call.
Our Main Georgetown Services
Two services get the most calls from Georgetown homeowners, and both have their own dedicated pages with full pricing and local details.
Fireplace Services in Georgetown
Gas log sets, wood-burning fireplace tune-ups, and insert repairs across Georgetown’s housing stock, from the historic downtown square to Wolf Ranch and Sun City Texas. We see a lot of zero-clearance units at first-service age, and we document everything with a camera before we quote. Fireplace Services in Georgetown covers what we check and what it costs.

Chimney Cap & Crown in Georgetown
Deteriorating caps and crowns are the most common entry point for water damage in Georgetown chimneys, especially after the freeze-thaw cycles that come with Balcones Escarpment winters. A cracked crown lets moisture into the masonry, and a missing cap invites birds. Chimney Cap & Crown in Georgetown has the full rundown on materials and local pricing.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Sweep in Georgetown

A chimney sweep in Georgetown is not a luxury service. In this city, it’s usually the difference between a safe November fire and a chimney fire that starts in a flue packed with stage-one creosote and bird debris from a long disused cap. Our Chimney Sweep work here starts at $189 and always includes a camera inspection and a written account of exactly what we found and what it costs to address.
Creosote Removal
Signs you need it
Shiny, tar-like glaze on flue walls, a strong smoky smell in the room even when the damper is open, or fires that struggle to draw in a Georgetown zero-clearance insert.
What it costs in Georgetown
Sticky stage-two and stage-three creosote removal in Georgetown typically runs $250 to $420, depending on flue length and how much glaze has hardened on the walls.
How we do it
We run rotary loop or steel cable brushes down the flue, inspect with a camera, and hand you a photo record showing the before and after, per Clause 4 of the Haven Standard.
Annual Sweep
Signs you need it
You’ve burned a dozen or more fires since the last sweep, or you just bought a Georgetown home with a fireplace and no way to verify when it was last cleaned.
What it costs in Georgetown
A standard annual sweep with a Level 1 inspection runs $189 to $260 for most Georgetown homes, including the camera scan and written report.
How we do it
We brush the full flue length, vacuum the smoke chamber and firebox, run the camera, and leave you with a written price on any repair work we recommend.
What Chimney Sweep Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Standard sweep with Level 1 inspection | $189 - $260 |
| Creosote removal (stage-two or three glaze) | $250 - $420 |
| Animal nest removal from flue | $150 - $350 |
How do I know if my chimney actually needs cleaning in Georgetown?
If you’ve burned ten or more fires since the last sweep, or if you can scrape a quarter inch of black crust from the flue wall with a metal tool, it needs attention. The camera tells us the rest.
Does Georgetown’s climate make creosote worse?
Yes. Short burns during sudden cold snaps never push the firebox to full draft temperature, so combustion stays incomplete and leaves a sticky residue that a longer, hotter northern-winter fire would not. Sweeps matter more here, not less.
Chimney Repair in Georgetown

Chimney repair in Georgetown usually starts with masonry that’s cracked from freeze-thaw cycles and ends with a written quote, not a surprise. Historic downtown square homes need repointing as their lime mortar breaks down, while Sun City Texas zero-clearance units tend to fail at flashing and crown level. Our Chimney Repair work starts with a camera inspection and a written scope before anyone lifts a tool.
Mortar Repointing
Signs you need it
Crumbling gray joints between bricks, missing mortar, or water staining inside the firebox after a Georgetown rain.
What it costs in Georgetown
Repointing on a standard Georgetown chimney runs $800 to $2,500 depending on access, chimney height, and how many courses of brick need work.
How we do it
We grind out degraded mortar to a consistent depth, match the original joint profile, and repoint with a mix suited to the brick’s age and hardness.
Flashing Repair
Signs you need it
Dark water stains on the ceiling near the chimney, rusted or lifted flashing, or damp drywall in the attic after heavy rains.
What it costs in Georgetown
Flashing repair in Georgetown typically runs $350 to $900, more if the existing flashing is so corroded it needs full replacement rather than sealing.
How we do it
We cut back the old flashing, install stepped aluminum or copper flashing overlapped into chimney mortar joints, and document the finished work with photos.
What Chimney Repair Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Mortar repointing (standard chimney) | $800 - $2,500 |
| Flashing repair or replacement | $350 - $900 |
| Chimney waterproofing treatment | $450 - $800 |
Can a cracked chimney crown wait until spring in Georgetown?
A hairline crack can wait a few months if it’s not leaking, but Georgetown freeze-thaw cycles widen cracks fast once water gets in. Every freeze makes the repair larger and more expensive.
Why does repointing cost more for historic Georgetown homes?
Older brick and lime mortar demand softer, historically compatible mixes and slower grinding speeds to avoid chipping the brick itself. The labor doubles, and so does the care.
Chimney Liner & Rebuild in Georgetown

In Sun City Texas homes, factory-built units often need liner replacement when the original metal flue corrodes past safe use. Our Chimney Liner & Rebuild work always starts with camera evidence, so you never take our word for a liner that supposedly “failed.”
Stainless Steel Liner
Signs you need it
Cracked or missing terra-cotta flue tiles found on camera, or a home inspector flagged it during a Georgetown real estate transaction.
What it costs in Georgetown
A stainless steel liner installed in Georgetown runs $2,800 to $5,500 depending on flue length, roof access difficulty, and whether insulation is needed.
How we do it
We size the liner to the appliance it serves, drop it through the existing flue, insulate if clearance demands it, and cap and crown the top against water.
Partial Rebuild
Signs you need it
Spalling brick above the roofline, a leaning top few feet, or missing mortar caps with bricks loosening after a winter norther.
What it costs in Georgetown
A partial chimney rebuild for the top 3 to 5 feet in Georgetown typically runs $2,000 to $4,500 depending on brick match and scaffold needs.
How we do it
We remove bad brick course by course, rebuild with matched material and proper crown overhang, and waterproof the finished section.
What Chimney Liner & Rebuild Costs in Georgetown
| Item | Typical range in Georgetown |
|---|---|
| Stainless steel liner installation | $2,800 - $5,500 |
| Partial rebuild (top 3-5 feet) | $2,000 - $4,500 |
| Full chimney rebuild | $8,000 - $20,000 |
How do I know if my Georgetown chimney actually needs a new liner?
The camera is the only honest answer. If we can’t show you a crack, gap, or corrosion on the footage, we won’t recommend a liner replacement. You get the photos either way.
Can a liner be installed without a full rebuild in Georgetown?
In most cases, yes. Our Stainless Steel Liner work uses DuraFlex or Copperfield liners dropped through the existing flue, so the chimney stays standing and the liner does the work.
Brands We Service in Georgetown

We stock and install parts from DuraFlex, Copperfield, and Famco, which covers most factory-built and masonry chimney configurations found in Georgetown homes. Local supply is typically available within a few days, and our brands page shows what we carry and why these specific manufacturers made the cut.
Pricing for Chimney Cleaning in Georgetown, TX
| Service | Typical range in Georgetown |
|---|---|
| Standard sweep with Level 1 inspection | $189 - $260 |
| Creosote removal (stage-two or three glaze) | $250 - $420 |
| Animal nest removal from flue | $150 - $350 |
| Mortar repointing (standard chimney) | $800 - $2,500 |
| Flashing repair or replacement | $350 - $900 |
| Chimney waterproofing treatment | $450 - $800 |
| Stainless steel liner installation | $2,800 - $5,500 |
| Partial rebuild (top 3-5 feet) | $2,000 - $4,500 |
| Full chimney rebuild | $8,000 - $20,000 |
Price in Georgetown moves on two things: chimney height and access. A two-story home in Wolf Ranch with a steep roof pitch costs more to access than a single-story Sun City Texas house with a walkable roof. Every quote we give is written, itemized, and delivered before any work starts, per Clause 1 of the Haven Standard.
Neighborhoods We Serve in Georgetown

We work across the entire Georgetown city limits, from the historic downtown square to the newest master-planned subdivisions. Our technicians live and work in this area, which keeps response times short for a booked appointment.
- Sun City Texas
- Wolf Ranch
- Georgetown Village
- Parkside at Mayfield Ranch
- Downtown Georgetown (historic district)
Service Area - Cities Near Georgetown
For homeowners just outside Georgetown, we also provide chimney cleaning and repair in Round Rock, TX, Hutto, TX, Leander, TX, and Cedar Park, TX. Scheduling is coordinated from our Austin office, but the crews work locally and know the housing stock in each of these cities.
Serving Georgetown, TX - Our Local Coverage Area

We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Georgetown
Most chimney cleaning and repair work in Georgetown does not require a city permit, but a full rebuild or structural modification may. We’ll tell you in writing if your job triggers permitting and who handles it.
Book two to three weeks ahead of the first cold snap for best availability. Georgetown demand spikes hard in November when the first norther hits, and waiting until then for a sweep may push your appointment into December.
Yes. We work regularly throughout Sun City Texas and are familiar with the HOA’s exterior-work requirements. Chimney access there is straightforward on most single-story homes, which keeps pricing close to our listed ranges.
Call (980) 580-8641 for a free, written estimate on any chimney work in Georgetown, and we’ll send a background-checked technician with a camera, not a flashlight and a guess.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Georgetown Customers Say
"They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A.





Before
After
Before
After