Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Sunrise, FL
Chimney cleaning in Sunrise, FL typically costs between $189 and $329 for a standard sweep with a Level 1 inspection, and most jobs are completed in 60 to 90 minutes. What makes Sunrise different is that most fireplaces here haven’t been used for heating in years; the real problems are rust, wildlife nesting, and water damage inside prefabricated metal flue systems installed in 1970s and 1980s tract homes. If you’re seeing rust stains, hearing animals, or smelling damp air from the fireplace, call (980) 580-8641 for a written quote before any work begins.
Why Sunrise Homes Are Different
Sunrise sits roughly 12 to 15 miles from the Atlantic, and the salt-laden air that drifts inland corrodes metal chimney components faster than in most Florida markets. Cap screens, dampers, and the galvanized chase covers on prefabricated fireplaces take a beating here, and we replace far more rusted chase tops in Sunrise than we do anywhere else in Broward County. The humidity is the other constant. With fewer than five days a year cold enough to actually justify a fire, chimneys in Sunrise sit sealed and unventilated through months of 90%-plus humidity. That’s a recipe for mold growth inside flues, rust on metal liners, and year-round nesting habitat for roof rats and raccoons.
The housing stock compounds it. Sunrise was built out largely between the late 1960s and early 1990s, and whole subdivisions, including much of the Inverrary golf community, were fitted with near-identical zero-clearance prefabricated fireplaces as builder marketing upgrades rather than functional heating appliances. After 40 to 50 years of subtropical humidity cycles, those units commonly present with warped firebox panels, seized or missing dampers, and chase covers that have been letting moisture and pests in for years. A technician who knows the era’s common failure modes can often diagnose the unit before stepping inside the home, which is why our Sunrise calls tend to run faster than expected.
Our Main Sunrise Services
While chimney cleaning is the most common call we field in Sunrise, two related services account for most of the repair and retrofit work in this market. Both are covered by the same flat, written pricing and the same documented photo record as every sweep.
Fireplace Services in Sunrise
Many Sunrise homeowners call us about a fireplace that has never worked quite right since they bought the house, usually in a 1970s or 1980s tract home where the unit was installed as an amenity rather than a heat source. We inspect the firebox, damper, gas line or log set, and venting path, then show you photos of what we find before recommending anything. Most Sunrise jobs involve replacing warped refractory panels or freeing a seized throat damper, and we quote the fix in writing before starting. See Fireplace Services in Sunrise for full pricing and scope.
Chimney Cap & Crown in Sunrise
Rusted chase covers and cracked crown mortar are the leading cause of water damage in Sunrise chimneys, and they’re also the cheapest fix if caught early. We replace failed galvanized chase tops with stainless equivalents, seal crown cracks, and install or replace animal-guard caps that keep raccoons and roof rats out. In Sunrise’s salt air, a galvanized chase cover installed 20 years ago is almost always at the end of its life. Details and pricing are on Chimney Cap & Crown in Sunrise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Sunrise
Chimney cleaning in Sunrise is rarely about creosote. In a climate where fireplaces go essentially unused for heating, what builds up inside the flue is different: mold, rust scale, pest debris, and sometimes an old bird or rat nest that’s been blocking the flue for years. Our camera-scan inspection, the NFPA 211 Level 2 standard, is part of every Chimney Sweep visit, and we’ll show you the footage before we quote anything.
The good news is that a standard sweep here often takes less time than in cold-climate markets because there’s less creosote to remove. The bad news is that neglect in Sunrise tends to produce internal rust and water damage that a cleaning alone won’t fix, which is exactly why we document everything with photos and give you a written scope before proceeding.
Level 1 Inspection
Signs you need it
You’ve just bought the home, haven’t used the fireplace in a year or more, or simply can’t remember the last time anyone looked inside the flue.
What it costs in Sunrise
A Level 1 inspection in Sunrise runs $149 to $229 when booked as part of a cleaning, and $189 to $269 as a standalone visit.
How we do it
We check the accessible portions of the flue, damper, firebox, and exterior masonry, then give you a written report with photos and a clear pass-or-fix recommendation.
Level 2 Inspection
Signs you need it
You’ve had water intrusion, animal entry, a chimney fire, a change in fuel type, or a real estate sale that triggered a deeper look.
What it costs in Sunrise
A Level 2 inspection with a camera scan of the full flue interior runs $249 to $399 in Sunrise, depending on the flue type and access.
How we do it
We run a camera down the entire flue from roof to firebox, photograph every defect, and hand you a written inspection record with the footage archived under Haven Standard Clause 4.
Creosote Removal
Signs you need it
You see black, tar-like glaze on the firebox walls, or the flue smells acrid even when cold.
What it costs in Sunrise
Creosote removal in Sunrise ranges from $250 to $550 when the buildup is Class II or Class III glazed creosote requiring rotary cleaning tools.
How we do it
We run a rotary whip and stiff brushes through the flue, then vacuum the firebox and smoke chamber and show you the before-and-after camera frames.
Soot Removal
Signs you need it
Fluffy black powder is falling into the firebox, or the damper and smoke shelf are coated in fine carbon dust.
What it costs in Sunrise
Soot removal is included in the standard sweep price of $189 to $329 for most Sunrise homes, unless the soot is heavy enough to require a second pass.
How we do it
We brush and vacuum the flue, clean the damper and smoke chamber, and confirm with the camera that the walls are down to bare flue surface.
Annual Sweep
Signs you need it
You use the fireplace even a handful of times per year, or you’ve never had the flue cleaned in a home you bought more than two years ago.
What it costs in Sunrise
An annual sweep in Sunrise is $189 to $329, with the higher end applying to taller flues or heavier buildup found in long-neglected units.
How we do it
We run a full sweep, a Level 1 inspection, and a camera check, then leave you a written record of the service under the Haven Standard.
What Chimney Sweep Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Standard sweep with Level 1 inspection | $189 - $329 |
| Level 2 camera inspection (add-on or standalone) | $249 - $399 |
| Creosote removal (Class II/III glazed) | $250 - $550 |
How often should I have my chimney swept in Sunrise?
Once a year if you use it at all, and once every two to three years if it sits unused but is open to moisture and pests. Sunrise humidity causes flue deterioration even with zero use, so the camera check matters as much as the sweep itself. Call (980) 580-8641 to book.
Does an unused fireplace in Sunrise actually need cleaning?
Yes, because what accumulates in an unused flue here isn’t soot; it’s rust scale, mold, and animal nesting debris that can block the flue and leak odors into the house. A camera inspection tells you exactly what’s in there.
Chimney Repair in Sunrise
Chimney repair in Sunrise is dominated by two patterns: water-damaged prefabricated components rusting out from the inside, and masonry crowns cracking after decades of subtropical moisture cycles. The fix usually starts with a camera inspection to see exactly which layer has failed, because guessing wrong means paying twice. Our Chimney Repair work is quoted in writing with a photo record before any repair begins.
In the 1970s and 1980s neighborhoods around Inverrary, the most common repair call we get is a fireplace that’s rusted through at the flue collar or a damper that’s seized permanently in one position. Both are predictable failures for that housing age, and both can be fixed without tearing out the whole chimney if caught in time.
Mortar Repointing
Signs you need it
Mortar joints are crumbling, whitish with efflorescence, or missing in sections on the exterior masonry.
What it costs in Sunrise
Mortar repointing in Sunrise ranges from $25 to $45 per square foot of reworked joint surface, with a typical repair running $400 to $1,200.
How we do it
We grind out the deteriorated mortar to a proper depth, pack in new mortar matched for color and strength, and tool the joints to shed moisture.
Spalling Brick Repair
Signs you need it
Brick faces are flaking off, leaving the porous interior exposed, or you’re finding brick chips on the roof or ground below the chimney.
What it costs in Sunrise
Spalling brick repair in Sunrise runs $25 to $45 per square foot for brick replacement and joint repointing, plus materials.
How we do it
We remove the damaged bricks, source replacements matched to your existing masonry, and set them in fresh mortar with the surrounding joints repointed.
Chimney Waterproofing
Signs you need it
Water is pooling inside the firebox after rain, or the masonry interior walls are damp to the touch days after a storm.
What it costs in Sunrise
Chimney waterproofing with a breathable masonry sealant runs $400 to $900 for a standard single-flue chimney in Sunrise.
How we do it
We clean the exterior surface, apply a vapor-permeable silane or siloxane sealant designed for masonry, and verify coverage before it cures.
What Chimney Repair Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Mortar repointing (per sq ft of joint work) | $25 - $45 |
| Spalling brick repair (per sq ft) | $25 - $45 |
| Chimney waterproofing (standard flue) | $400 - $900 |
Can water-damaged prefab fireplaces in Sunrise be repaired?
Often yes, if the damage is limited to the firebox panels, damper, or chase cover. If the metal flue itself has rusted through, replacement of the flue system is usually the safer call, and the camera will show you exactly why.
How fast can a chimney repair be completed in Sunrise?
Most mortar and waterproofing repairs are done in one visit, while brick replacement and partial rebuilds can take two to four days depending on weather and material availability. Every repair is quoted in writing before we start.
Chimney Liner & Rebuild in Sunrise
Chimney liner and rebuild work in Sunrise is almost always about failing prefabricated metal systems or masonry that has absorbed decades of rain and humidity. In this climate, a liner that would last 30 years in a dry market can fail in 15 to 20, and a brick chimney that was never waterproofed can be structurally unsafe by year 40. Our Chimney Liner & Rebuild work starts with a camera scan to document the condition, then a written scope and price before any material is ordered.
For Sunrise’s 1970s and 1980s zero-clearance units, a liner rebuild often means replacing the entire prefab flue system with a new stainless listed system, because the original components are obsolete and no replacement parts exist. We’ll tell you plainly if the old unit can be salvaged or if a full flue replacement is the only sensible fix.
Stainless Steel Liner
Signs you need it
The existing flue has rusted through, is leaking fumes into the home, or has failed a camera inspection due to corrosion or joint separation.
What it costs in Sunrise
A stainless steel liner installed in Sunrise runs $2,500 to $5,000 for a typical single-flue chimney, depending on height and access.
How we do it
We size the liner to your flue, drop it in and connect it to the appliance, insulate if needed, and run the camera again to verify the installation.
Flexible Liner
Signs you need it
Your existing flue has a slight offset or tight bend that makes a rigid liner impossible, but the original flue is still structurally sound enough to line.
What it costs in Sunrise
A flexible liner in Sunrise is priced the same as stainless at $2,500 to $5,000 for most homes, with the flex material slightly raising material rates on longer runs.
How we do it
We pull the flexible liner through the existing flue path, clamp and seal every joint, and finish with a camera verification of the liner wall.
Liner Replacement
Signs you need it
The current liner is cracked, rusted, or disconnected at the joints, and the camera shows it’s no longer containing flue gases or moisture.
What it costs in Sunrise
Liner replacement in Sunrise runs $2,500 to $5,000 including tear-out of the old liner and installation of a new listed liner.
How we do it
We remove the failed liner, prepare the flue, install the new stainless liner, and test the whole system with a draft check before signing off.
Partial Rebuild
Signs you need it
The top few feet of masonry are cracked and pushing inward, the crown has failed, or a section of brick above the roofline is visibly bowing.
What it costs in Sunrise
A partial chimney rebuild in Sunrise runs $1,800 to $3,800 for a standard residential chimney top section.
How we do it
We tear down the compromised section to sound material, rebuild the brick or block, install a proper poured crown, and reflash the base.
Full Chimney Rebuild
Signs you need it
The chimney is leaning, cracked through at multiple heights, or the bricks are so spalled that patching would leave more patch than original structure.
What it costs in Sunrise
A full chimney rebuild in Sunrise runs $4,500 to $12,000, depending on height, material, and whether the firebox is included.
How we do it
We fully tear down to the roofline or foundation as needed, rebuild with new masonry and a new flue liner, and finish with waterproofing and a documented record.
What Chimney Liner & Rebuild Costs in Sunrise
| Item | Typical range in Sunrise |
|---|---|
| Stainless steel liner | $2,500 - $5,000 |
| Partial rebuild (top section) | $1,800 - $3,800 |
| Full chimney rebuild | $4,500 - $12,000 |
Do I really need a new liner, or can I just patch it?
If the camera shows rust-through, joint separation, or a hole that would allow flue gases into the wall cavity, patching is a waste of money and a safety liability. We’ll show you the footage before you commit, and we’ll tell you if a repair can safely wait.
How long does a liner or rebuild last in Sunrise’s climate?
A stainless liner installed with proper insulation should last 20 to 30 years even in salt air, and a rebuilt masonry chimney with waterproofing and a good crown should go 30 to 50. The camera record is the proof of what was installed and how it’s holding up.
Brands We Service in Sunrise
We install and service prefabricated fireplaces, liners, caps, and dampers from the brands most commonly found in Sunrise homes, including units built around Gelco, Olympia Chimney, and Copperfield components. Common replacement components are stocked at our South Florida supply point, so most Sunrise jobs can be scheduled without a long parts delay. See our brands page for the full service list.
Pricing for Chimney Cleaning in Sunrise, FL
| Service | Typical range in Sunrise |
|---|---|
| Standard chimney sweep with Level 1 inspection | $189 - $329 |
| Level 1 inspection (standalone) | $189 - $269 |
| Level 2 camera inspection | $249 - $399 |
| Creosote removal (Class II/III) | $250 - $550 |
| Mortar repointing (per sq ft) | $25 - $45 |
| Spalling brick repair (per sq ft) | $25 - $45 |
| Chimney waterproofing | $400 - $900 |
| Stainless steel liner | $2,500 - $5,000 |
| Partial rebuild | $1,800 - $3,800 |
| Full chimney rebuild | $4,500 - $12,000 |
Two things push price up in Sunrise more than anything else: heavier-than-expected rust or animal damage found once the camera goes in, and access problems on taller or steeper roofs common in two-story tract homes. Whatever we find, you get a written price and a written scope before we start, not after the tech is already on the roof. That’s Haven Standard Clause 1, and there are no exceptions.
Neighborhoods We Serve in Sunrise
We work throughout Sunrise and the surrounding suburbs, including the older golf-course subdivisions where prefabricated fireplaces from the 1970s and 1980s are most common. Most Sunrise jobs can be scheduled within a week, and we text you when the named tech is on the way.
- Inverrary
- Sunrise Golf Village
- Welleby
- Springtree
- New River Estates
Service Area - Cities Near Sunrise
Our Sunrise crews also cover nearby Florida markets for chimney cleaning, repair, and liner work. If you’re outside the immediate Sunrise area, you can find service details for Miami, FL, Jacksonville, FL, Tampa, FL, and Orlando, FL on their local pages.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Sunrise
Most Sunrise appointments are scheduled within five to seven business days, and we send a text when your named technician is en route. If you have a specific deadline, like a home sale or an HOA requirement, mention it when you call and we’ll do our best to accommodate the date.
For interior cleaning and inspection work, no. For exterior repairs like chase covers, crowns, or rebuilds in Sunrise’s many HOA-governed communities, we recommend checking your governing documents first; we’ll provide a written scope and drawings if your association requires them for approval.
Every visit includes the sweep, a Level 1 or Level 2 camera inspection based on the job, a documented photo record, and a written report. If we find additional work needed, you’ll get a separate written quote before anything is performed, and you can keep the photos regardless of whether you proceed.
For a free estimate and a written price before work starts, call (980) 580-8641. We answer live, 24/7, and we’ll walk you through what your Sunrise chimney actually needs based on what the camera shows.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sunrise Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.