Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Concord, NC
Chimney cleaning in Concord, NC typically costs $189-$289 for a standard sweep with a Level 1 inspection, and $289-$489 when a camera-scan Level 2 inspection is included. Most Concord homes we service were built between 1955 and 1975, which means original terra-cotta flue liners now 50 to 70 years old and cracking from decades of Diablo Valley thermal cycling. Call (980) 580-8641 for a written price before any work begins.
Why Concord Homes Are Different
Concord sits deep in the Diablo Valley, where winter nights regularly drop into the mid-30s°F. That’s cold enough that people here actually burn wood, unlike milder Bay Area cities closer to the water. But BAAQMD Spare the Air restrictions ban wood burning on most winter days between November and February, which compresses a full year of chimney demand into a short pre-season rush before the first legal burn days open.
Homes in the Monument Boulevard corridor, along Clayton Road, and throughout the older ranch-style tracts near Todos Santos Plaza were mostly built in the 1950s through early 1970s. Those chimneys were constructed with builder-grade masonry and terra-cotta flue liners. Add the fact that raccoons are common in the valley foothills and love an open flue all summer, and the first cleaning of the season often turns up more than soot.
Our Main Concord Services
Two services account for most of the calls we take from Concord homeowners each fall and winter, both tied directly to the age of the housing stock and the Spare the Air burn window.
Fireplace Services in Concord
Concord’s ranch and split-level homes were built with masonry fireplaces that now need more than cleaning. Cracked firebrick, failing dampers, and gas inserts installed during the 2000s to work around wood-burning restrictions all show up in our Fireplace Services in Concord work. We document the condition of the firebox, damper assembly, and gas line connections with camera photos before recommending any repair.

Chimney Cap & Crown in Concord
The crown is the concrete slab at the top of the chimney, and in Concord’s older homes it is often cracked or spalling from decades of winter rain and summer heat. A damaged crown lets water into the masonry, which accelerates liner and mortar decay. Our Chimney Cap & Crown in Concord service includes crown repair, cap replacement, and camera documentation of the finished work. Raccoon entry through a missing cap is a common first-week-of-November discovery.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Sweep in Concord

Chimney cleaning in Concord means dealing with creosote buildup from a compressed burn season and the animal nesting or cracked mortar that accumulates during months when Spare the Air rules keep fireplaces dark. Most Concord homes we clean have terra-cotta flue liners from the original construction era, and creosote hides in liner cracks where a basic brush sweep will not reach it. That is why we include a camera-scan inspection on every visit as part of our Chimney Sweep standard. The camera shows us, and you, exactly where the creosote sits and whether the liner has opened up.
Annual Sweep
Signs you need it
A quarter inch or more of soot buildup on the flue walls, visible during a flashlight check, is the threshold where the National Fire Protection Association says it is time to sweep.
What it costs in Concord
A standard annual sweep in Concord runs $189-$289, and with a Level 2 camera inspection the total is $289-$489.
How we do it
We run rotary brushes through the full flue length, vacuum from the firebox, and then send a camera down to confirm the flue walls are clean and intact.
Creosote Removal
Signs you need it
Glazed, shiny black deposits on the flue walls are Class III creosote, the hardened form that resists standard brushes and is the leading cause of chimney fires.
What it costs in Concord
Creosote removal, when it requires chemical treatment or specialized rotary tools, typically adds $150-$300 to the sweep cost in Concord.
How we do it
We apply a creosote conditioner, then use rotary chain or wire heads to break the glaze, followed by a second pass to remove what flaked off the walls.
Level 1 Inspection
Signs you need it
You burn your fireplace every winter and have not had a professional look at the accessible parts of the flue and firebox in the last year.
What it costs in Concord
A Level 1 inspection is included in the standard $189-$289 sweep price in Concord, not billed as an add-on.
How we do it
We check the accessible portions of the flue, damper, firebox, and exterior chimney, then write up findings with a documented photo record.
What Chimney Sweep Costs in Concord
| Item | Typical range in Concord |
|---|---|
| Standard sweep with Level 1 inspection | $189-$289 |
| Sweep with Level 2 camera inspection | $289-$489 |
| Creosote removal (Class III glaze) | $150-$300 added |
How often should I have my chimney swept in Concord?
Once a year, before the first burn of the season. In Concord that means booking in September or early October, before the Spare the Air winter season opens and the rush begins. Camera evidence after last season is the best guide.
Can you clean a chimney that rained into all summer?
Yes. Rain entry usually points to a cracked crown or missing cap, not dirt inside the flue. We sweep, then camera the flue to check for water damage to the liner before recommending any crown or cap work. Call (980) 580-8641 for a written scope.
Chimney Repair in Concord

Chimney repair in Concord is mostly mortar repointing and crown work on chimneys built during the 1950s-to-1970s housing boom. The Diablo Valley’s inland temperature swings, wider than coastal cities just a few miles west, push moisture into mortar joints and freeze-thaw cycles do the rest. Cracks that go unnoticed behind a summer of disuse become visible during the first cleaning, and that is why our Chimney Repair work starts with camera documentation, not a hammer.
Mortar Repointing
Signs you need it
Crumbling or missing mortar between bricks, especially near the top of the chimney where weather exposure is worst.
What it costs in Concord
Mortar repointing in Concord typically runs $800-$2,500 depending on access and the number of joints that need work.
How we do it
We grind out deteriorated joints to a proper depth, pack in fresh mortar matched to the original in color and hardness, then document the finished wall with photos.
Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, or rusted, lifted, or separated flashing visible at the roofline.
What it costs in Concord
Flashing repair or replacement generally costs $400-$900 in Concord, more if the roof pitch is steep and requires staging.
How we do it
We remove the old flashing, install new step and counter flashing sealed to the roof and chimney, and then photograph every layer before the sealant goes on.
What Chimney Repair Costs in Concord
| Item | Typical range in Concord |
|---|---|
| Mortar repointing | $800-$2,500 |
| Flashing repair or replacement | $400-$900 |
| Spalling brick repair | $600-$1,800 |
Is a cracked brick a fire risk or just cosmetic?
Spalling brick, where the face pops off the brick body, lets water into the chimney structure. That water reaches the flue liner and accelerates cracking. It is a structural issue, not cosmetic. We price repair after seeing the camera footage.
Do I need a permit for chimney repair in Concord?
Most repointing and flashing work does not require a City of Concord permit. A partial or full rebuild may. We scope the job, tell you whether permits apply, and put that determination in writing before anything starts.
Chimney Liner & Rebuild in Concord

Chimney liner and rebuild work in Concord traces back to the terra-cotta liners installed in homes built between 1955 and 1975. Decades of thermal cycling in the Diablo Valley’s inland climate crack those liners, and once a liner is cracked, combustion gases can reach the house framing. Our Chimney Liner & Rebuild work fixes both the liner and, when needed, the masonry around it, always with camera evidence before and after.
Stainless Steel Liner
Signs you need it
Camera inspection shows cracks, gaps, or missing sections in the original terra-cotta liner, or you are converting from wood to a gas appliance that needs a correctly sized liner.
What it costs in Concord
A stainless steel liner install in Concord runs $2,500-$4,500 for a typical single-story ranch, more for a two-story or steep roof.
How we do it
We size the liner to the appliance, drop it down the flue, insulate as required, and connect it at the top plate and appliance collar, then camera-scan the finished run.
Partial Rebuild
Signs you need it
The top courses of brick are loose or missing, the crown has crumbled, and water damage is concentrated above the roofline.
What it costs in Concord
A partial chimney rebuild in Concord, from the roofline up, generally costs $3,000-$6,000 depending on height and access.
How we do it
We tear down to sound masonry, rebuild the stack with matched brick, pour a proper overhanging crown, and document every course with photos before closing out the job.
What Chimney Liner & Rebuild Costs in Concord
| Item | Typical range in Concord |
|---|---|
| Stainless steel liner install | $2,500-$4,500 |
| Partial rebuild (roofline up) | $3,000-$6,000 |
| Full chimney rebuild | $8,000-$18,000 |
Do I really need a new liner, or can the old one be patched?
Terra-cotta liners cannot be reliably patched. Once a section is cracked, the fix is a new liner, either stainless or a poured system. We show you the camera footage of the crack before quoting anything, so you can see the evidence yourself.
How long does a stainless steel liner last in Concord’s climate?
A correctly sized stainless liner, insulated and installed to code, will outlast the remaining life of most 1950s-era chimneys. The bigger variable is the masonry around it, which is why every rebuild quote includes crown work. Call (980) 580-8641 for a written estimate.
Brands We Service in Concord

We install and service liners and components from DuraFlex, HeatShield, and Copperfield, and keep common parts stocked for Concord’s older masonry chimneys. Turnaround on liner material is typically under a week. See our brands for the full list and warranty details.
Pricing for Chimney Cleaning in Concord, NC
| Service | Typical range in Concord |
|---|---|
| Standard sweep with Level 1 inspection | $189-$289 |
| Sweep with Level 2 camera inspection | $289-$489 |
| Creosote removal (Class III glaze) | $150-$300 added |
| Mortar repointing | $800-$2,500 |
| Flashing repair or replacement | $400-$900 |
| Spalling brick repair | $600-$1,800 |
| Stainless steel liner install | $2,500-$4,500 |
| Partial rebuild (roofline up) | $3,000-$6,000 |
| Full chimney rebuild | $8,000-$18,000 |
What pushes price up in Concord is roof pitch, chimney height, and the condition of the masonry discovered during the camera scan. Every job gets a written price, written scope, and written warranty before any work starts, and that price does not change after we are on site.
Neighborhoods We Serve in Concord

We service the full city of Concord, with most of our calls coming from the older ranch tracts and the neighborhoods around them.
- Todos Santos Plaza and downtown Concord
- Monument Boulevard corridor
- Clayton Road area
- North Concord near the Solano County line
- Ygnacio Valley area
Response time across the city is typically same week during the fall rush, faster in the off season.
Service Area - Cities Near Concord
We also work in the surrounding communities, including Kannapolis, NC, Charlotte, NC, Huntersville, NC, and Cornelius, NC. Scheduling is coordinated from our Charlotte office, and crews serve Concord locally. Live phone support runs 24 hours a day, seven days a week.
Serving Concord, NC - Our Local Coverage Area

We’re based in the Concord area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Concord
Book in September or early October. The Spare the Air winter season opens in November, and the first legal burn days trigger a rush for appointments that makes scheduling harder. Homes that sat unused all summer often show raccoon nesting or fresh cracks, and we see the heaviest demand during that first week.
No, BAAQMD does not require a cleaning before you burn. But if your chimney smokes heavily or burns inefficiently, you will burn through your allowed burn days faster. A clean flue and a documented inspection are the practical way to stay within the rules. The inspection record is yours to keep.
Yes. Many Concord homes have gas inserts installed to work around Spare the Air wood-burning bans. We inspect the gas venting inside the original masonry shell, check the flue condition, and camera-scan the full run. A deteriorating masonry chimney still needs attention even with a gas appliance venting through it.
Call (980) 580-8641 for a written estimate on chimney cleaning, repair, or liner work in Concord. Every visit includes a camera-scan inspection, a documented photo record, and a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Concord Customers Say
"Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.





Before
After
Before
After