Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Temple City
A chimney cap replacement in Temple City typically runs $380-$690 for a standard single-flue stainless unit, while a full crown repair with coating lands between $550 and $1,100 depending on how much spalled mortar we need to remove. Most jobs are completed in under four hours on a standard ranch home, and every quote is written before work starts. If your cap has rusted through or your crown is shedding mortar chips onto the roof, call (980) 580-8641 and we’ll get a camera down the flue the same week.
Temple City’s housing stock is overwhelmingly post-WWII ranch construction, which means we spend most of our days on 60-to-70-year-old masonry chimneys that were built well but are now past their original service life. The caps corrode. The crowns crack. And because most of these fireplaces only get lit a handful of times each winter, the deterioration goes unnoticed until an SCAQMD No-Burn day makes the problem impossible to ignore. We know those homes because we’ve inspected thousands like them across the San Gabriel Valley, and we quote the fix in plain language with a photo record to back it up.
Our Chimney Cap & Crown team serves Temple City neighborhoods from the commercial corridors off Las Tunas Drive to the residential streets east of Rosemead Boulevard. Under Haven Standard Clause 4, every visit includes a camera-scan inspection and a documented photo record you keep, whether we do the work that day or not.
Why Emberly Chimney Cleaners Is Temple City’s Preferred Chimney Cap & Crown Company
Since 2009, we’ve completed more than 38,000 chimney inspections and cleanings across Southern California, and Temple City’s aging ranch homes account for a meaningful share of that number. Homeowners here tend to ask the same questions: can the crown be coated instead of rebuilt, will a stainless cap actually outlast the galvanized one that rusted through, and will the fix pass an SCAQMD inspection before the next burn alert. We answer those questions with a written price in hand, not a vague estimate delivered after the tech is already on your roof.
Our technicians are background-checked, uniformed, and assigned by name before they arrive. You get a text when they’re on the way. Temple City jobs are dispatched from our Los Angeles office, and our crews know the local streets well enough that they can usually tell which side of the house the chimney is on before they park.
What homeowners respond to most, though, is the documentation. Every job under the Haven Standard produces a written scope, a written price, and a written warranty before work begins. After it’s done, you get photos of the repaired crown, the new cap, the flashing, and the flue interior. If a competitor has quoted you something different, bring us their written estimate and we’ll give you a free second opinion, no strings attached.
Our Chimney Cap & Crown Services in Temple City
Cap Installation
A new stainless steel cap on a Temple City ranch typically runs $380-$690 for a standard single-flue job. Multi-flue caps on wider masonry chimneys run higher, usually $700-$1,050, because they require custom sizing and more involved mounting. We stock stainless caps from Copperfield and Olympia Chimney, and we quote the full installed price before you commit to anything.
Cap Replacement
This is the most common call we get in Temple City, and it usually starts with a galvanized cap that has rusted through at the corners. Galvanized steel does poorly in the moist San Gabriel Valley air, especially on chimneys that see only occasional use and never get hot enough to dry out thoroughly. We pull the old cap, document the flue condition underneath, and install a replacement that won’t fail the same way in five years.
Crown Repair
A Temple City chimney crown poured in the 1950s or 1960s has spent six to seven decades absorbing rain, sun, and temperature swings. When the mortar spalls and cracks, water gets into the flue and the smoke chamber. Crown repair starts at $550, which includes removing loose material, filling cracks, and re-sloping the surface so water drains away from the flue. We always show you the before-and-after photos.
Crown Coating
When the crown is structurally sound but the mortar surface is worn, a coating job runs $400-$800 for a typical Temple City chimney. We use Gelco sealant, brushed or troweled on, to create a water-resistant membrane that buys years of service without a full tear-out. The key is honest assessment: if the crown is too far gone, we’ll tell you, and we’ll show you the camera footage that proves it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Temple City
We stock and service components from Copperfield, DuraFlex, and Gelco, and we order through Haven’s buying network specifically to keep Temple City pricing in line with what the materials actually cost. That means when we quote a cap replacement, the price reflects a real Copperfield or Olympia cap, not an off-brand unit we found at a supply yard. For crown work, Gelco’s sealant has proven to hold up well on San Gabriel Valley masonry in our experience. If your existing cap or crown was installed with a different manufacturer’s product, we can usually match or adapt it.
Common Chimney Cap & Crown Problems We See in Temple City Homes
- Galvanized cap corrosion at the corners. Decades of moist San Gabriel Valley air plus sporadic fireplace use means caps never get hot enough to burn off condensation. The corners rust through first, leaving the flue open to rain and birds.
- Spalling mortar crowns on 60-to-70-year-old chimneys. The original crowns on Temple City’s post-WWII ranch homes were poured with standard mortar, which was never meant to last this long. When it cracks and sheds, water channels straight into the flue.
- Failed flashing at the roofline on low-slope ranch roofs. Temple City’s original ranch homes have shallow roof pitches, and the flashing where chimney meets shingle was often installed with materials that dried out decades ago. The leak is slow, which is why nobody notices until water stains show up around the firebox.
- Animal nesting behind missing or damaged spark arrestors. Raccoons and squirrels find their way into uncapped flues, especially in the quiet residential blocks north of Las Tunas Drive. We’ve pulled nests out of flues that hadn’t been inspected in over a decade.
Pricing for Chimney Cap & Crown in Temple City, CA
Here’s what Temple City homeowners can expect to pay. Cap installation runs $380-$690 for a single flue and $700-$1,050 for a custom multi-flue unit. Crown repair starts at $550 and goes up based on how much material needs to be removed. Crown coating lands between $400 and $800 for a standard ranch chimney. Full crown rebuilds, when the damage is too extensive to coat, run $1,200-$2,000. Every quote is written and includes the scope, the materials, and the warranty. Call (980) 580-8641 and we’ll give you an exact number before any work begins. If another company has already quoted you, bring it in and we’ll review it free.
We Also Serve Cities Near Temple City
Our Chimney Cap & Crown in Temple City team regularly runs jobs in El Monte, San Gabriel, Arcadia, and Rosemead. The housing stock is similar, the SCAQMD rules apply the same, and the chimneys are often just as old. If you’re a few blocks outside Temple City proper, the pricing and response times are effectively identical.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Temple City
No-Burn days mean you can’t legally burn wood in Temple City on many winter days, and alerts can drop with less than 24 hours’ notice. A cap inspection should happen every year, ideally in September or October, so you know the chimney is clean and compliant before the burn season compresses. If your cap is rusted or your spark arrestor is clogged, you may fail the visual check before you even get to the firebox. Call (980) 580-8641 in early fall and we’ll get you squared away before the first No-Burn alert hits.
It depends on how much of the original mortar is still bonded. If the crown has hairline cracks but no spalling, coating with Gelco usually buys years of service for $400-$800. If chunks of mortar are coming off and water has clearly been getting in, a full repair or rebuild is the honest fix. We’ll show you the camera footage and let you decide with the evidence in front of you. Call (980) 580-8641 for a written quote either way.
Temple City’s ranch homes were built in a narrow window, mostly 1950 through 1975, and most of them still have the original galvanized caps that were installed at construction. Fifty to seventy years of San Gabriel Valley humidity plus irregular fireplace use means those caps have never had a chance to dry thoroughly. Nearby cities have newer construction mixed in, but Temple City is almost entirely single-family ranch stock, so the failure rate is concentrated. It’s not that the caps were bad; it’s that they’ve simply reached the end of their service life all at once.
Yes, indirectly. A cracked crown lets rainwater into the flue, and that moisture mixes with whatever soot and creosote is already there from the last burn. The result is a damp, acidic residue that clings to the flue walls and accelerates deterioration of the clay tile liner. When you finally do get a legal burn day, that residue can ignite. Fixing the crown is the first step. Call (980) 580-8641 and we’ll inspect the whole system, not just the cap.
For a ranch home with two or three flues side by side, a stainless steel multi-flue cap is usually the right call. It covers the entire crown area, keeps rain out of every flue simultaneously, and won’t rust the way individual galvanized caps do. We custom-size multi-flue caps for Temple City chimneys using Copperfield and Olympia materials, with the price quoted in writing before we order anything. A custom cap for an unusual flue configuration might run $800-$1,200, but it’s a one-time fix that outlasts the roof it sits on.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Temple City under the Haven Standard.