Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Sicklerville
A chimney cap replacement in Sicklerville typically runs $385-$640 including the cap, and a poured concrete crown repair on a prefab chase runs $550-$900. Those are the numbers we write down before any work starts, because a written price is the only kind we give. Our crews work throughout Winslow Township, from the Sicklerville Road corridor to the neighborhoods off Williamstown Road, and we schedule most Sicklerville cap and crown jobs within five to seven business days. If you’re looking at a rusted chase cover or a spalling crown and want someone who will show you the actual condition before quoting, call (980) 580-8641.
Why Emberly Chimney Cleaners Is Sicklerville’s Preferred Chimney Cap & Crown Company
Sicklerville’s housing stock is unusual, and we’ve learned it the hard way: 25 to 40 years of failing prefab fireplaces, rusted chase pans, and chimney crowns poured by tract builders who never expected these systems to last this long. The homes off Sicklerville Road, along Garwood Road, and in the newer sections near Cedarbrook don’t have the same chimneys as nearby brick-built communities. They have factory metal chases hiding water intrusion that most people never see until a baffle panel collapses.
That’s exactly why Chimney Cap & Crown work in Sicklerville starts with a camera scan, not a flashlight glance. Clause 4 of the Haven Standard requires a documented photo record on every job, and we’ve held to that since 2009. Corrine Halstead, who leads our team, has made the call on thousands of these inspections: you see the photo, you see the reading, and then you decide. Nothing gets recommended on a hunch or a sales script.
What sickens us is how often Sicklerville homeowners tell us another company red-tagged a chase cover without ever putting a camera on it, then quoted thousands to replace the whole unit. We do free second opinions on any written estimate, and we’ll show you the condition with your own eyes. That’s the point of the name: Emberly means NFPA 211 Level 2, the inspection standard that requires interior camera evaluation, not just a rooftop look.
Our Chimney Cap & Crown Services in Sicklerville
Cap Installation
New cap installation on a Sicklerville prefab chase usually runs $385-$560, depending on the flue size and whether we’re fabricating a standard single-flue cap or a multi-flue stainless model. On 1980s and 1990s tract homes, we frequently install caps from Olympia Chimney and Copperfield because those brands manufacture replacement components sized to the original zero-clearance chase dimensions. Every installation gets the same written scope, photo documentation, and 365-Day Done Right Promise we’ve stamped on every job under the Haven Standard since day one.
Cap Replacement
If the original sheet-metal cap on your Sicklerville chase has rusted through at the seams, you’re looking at $420-$640 for a proper replacement that actually seals. The problem we see over and over along Sicklerville Road is that the factory pan cover corrodes quietly for years, dumping rainwater directly onto the firebox below. A replacement cap stops the intrusion, but only if the chase top is properly flashed and sealed. We’ll show you photo evidence of the rust and the fix before you spend a dime.
Crown Repair
Concrete crowns on Sicklerville’s tract-home chases spall and crack within two decades, and hairline fractures let water wick into the chase in ways that accelerate every other failure. Crown repair here runs $550-$900 for a full recast over a properly built form with a drip edge. On a prefab chase, the crown is often the unsung failure point: it didn’t matter for the first 15 years, then it mattered all at once. If your crown is cracked but the chase is structurally sound, repair beats replacement and we’ll say so plainly.
Crown Coating
For crowns that are intact but starting to weather, a flexible sealant coating costs $225-$385 and buys real time, but we’re honest about its limits. Coating is a maintenance step, not a structural repair. On Sicklerville chases where the pitch pine smoke from the Pine Barrens has left a sticky creosote residue on the crown surface, we clean and prime before coating so the product actually bonds. If a coating will fail within two seasons, we’ll tell you and recommend a recast instead.
Custom Cap
Custom cap fabrication for a multi-flue chase on a Sicklerville bi-level generally runs $640-$980 in stainless. When the original cap was specific to a discontinued Heatilator or Majestic unit, the real challenge is finding a properly sized replacement while keeping the system sealed. We fabricate custom stainless caps to match the existing chase footprint and flue termination, and we’ll document the finished install with photos. You shouldn’t have to pay for a whole new fireplace because a sheet-metal cap rusted out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Sicklerville
Most Sicklerville homes with prefab fireplaces were built around Heatilator, Majestic, and Superior units whose original chase caps and termination parts are now discontinued. We keep a working inventory of replacement caps, chase covers, and crown forms from Gelco, Famco, and Copperfield specifically because those brands cross-reference to the original 1980s and 1990s part numbers. That means we can usually prevent a Sicklerville homeowner from waiting weeks on a backordered proprietary component while fall burning season approaches. If a part is truly obsolete, we’ll tell you that too, and we’ll fabricate what we can.
Common Chimney Cap & Crown Problems We See in Sicklerville Homes
- Rusted-through factory chase covers. The sheet-metal pan covers installed on Sicklerville’s 1980s and 1990s tract-home chases rust out at the folded seams, quietly pouring rainwater onto the firebox for years before anyone notices. By the time you see water staining on the ceiling or smell damp wood, the damage is usually well underway.
- Spalling and cracked poured crowns. The crowns on prefab chases throughout Winslow Township were poured by production builders using basic bagged concrete, often without proper forms or drip edges. Two decades of South Jersey freeze-thaw cycles and humid summers have left them cracked, loose, and ready to let water into the chase.
- Discontinued proprietary caps. Heatilator, Majestic, and Superior stopped making many of the exact cap and chase components used in 1990s Sicklerville subdivisions. Homeowners end up with an unsafe system because a routine Level 1 inspection surfaced an obsolete part that no local distributor stocks anymore.
- High-resin creosote corroding metal caps and dampers. Burning Pine Barrens pitch pine and mixed softwoods produces stage-2 and stage-3 creosote far quicker than seasoned hardwoods, and that acidic residue sits on metal surfaces during the humid off-season, pitting caps and corroding damper assemblies before the first fall fire.
The Sicklerville-specific part of this isn’t just the age of the chases. It’s the combination: tract-built prefab units, pitch pine fuel, humid summers, and frozen winters. No single factor causes cap and crown failure here. The combination does. And a Sicklerville chase that looks fine from the ground can be hiding a rusted pan cover that’s been leaking for a decade. We camera-scan every cap and crown before recommending a single dollar of work, because in this housing stock, the visible problem is rarely the whole problem.
Pricing for Chimney Cap & Crown in Sicklerville, NJ
Here are the ranges we quote in Sicklerville: cap installation $385-$560, cap replacement $420-$640, crown repair $550-$900, crown coating $225-$385, custom stainless cap $640-$980. These land slightly above the South Jersey average because most Sicklerville jobs involve prefab chases with discontinued proprietary parts, and the labor required to fabricate, seal, and document a proper fix on those systems runs higher than a simple masonry chimney repair. What affects your final number: how many flues the chase serves, whether the existing cap or crown is still structurally sound, and whether we need to fabricate a part that’s no longer manufactured. Every quote is written before work starts, includes a documented photo record, and carries the 365-Day Done Right Promise. Call (980) 580-8641 for a free estimate and we’ll put the numbers on paper.
We Also Serve Cities Near Sicklerville
While this page focuses on Sicklerville, our crews regularly handle chimney cap and crown work in Cherry Hill, Camden, Trenton, and Jackson. The housing stock changes, but the standard doesn’t. Whether it’s a 1990s prefab chase in Winslow Township or a 1970s brick chimney in Cherry Hill, every job gets a camera scan, a written price, and a photo record. Call (980) 580-8641 to schedule anywhere in the area.
Serving Sicklerville, NJ - Our Local Coverage Area
We’re based in the Sicklerville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Sicklerville
Yes, and you should do it before this fall’s burning season. A rusted cap on a 1991 Sicklerville prefab is almost always the first visible sign that the chase cover underneath is also rusting through. The fireplace “working” doesn’t tell you anything about water intrusion happening inside the chase. We’ve opened up units off Sicklerville Road where the firebox still lit a fine fire while a rusted pan cover had been pouring rainwater onto the back of the unit for years. Water ruins refractory panels, collapses baffle panels, and rusts out the damper assembly long before the fire goes out. A replacement cap is the cheapest repair you’ll make on that chase. Camera-scanning the flue and chase interior will show you exactly what’s going on, and then you decide. Call (980) 580-8641 for a free estimate.
We can fabricate a custom stainless cap to fit your existing chase footprint, and we do it regularly for Sicklerville homeowners whose original Majestic or Heatilator caps are no longer manufactured. You don’t have to match the discontinued brand, and you shouldn’t have to pay for an entire new fireplace because a sheet-metal cap rusted out. The key is proper sizing to the chase opening and flue termination, with a secure mechanical fastening that survives South Jersey wind and weather. We’ll measure, fabricate, install, and photograph the finished job. A custom cap on a typical Sicklerville multi-flue chase runs $640-$980, and it carries the same 365-Day Done Right Promise as every other install.
If the chase structure itself is still sound, crown repair is worth it and costs a fraction of replacement. A full recast on a Sicklerville prefab crown runs $550-$900, and it stops the freeze-thaw water intrusion that eventually ruins the whole chase. But the honest answer depends on what the camera shows inside. If the crown has been leaking long enough that the firebox is rusted through or the flue liner is compromised, then putting a new crown on top is just decorating a failing system. We’ll camera-scan the interior before we recommend anything. On a bi-level off Sicklerville Road last season, our tech opened a metal chase to find the original sheet-metal cover corroded clean through at the seams, dumping rain straight onto a Majestic firebox with a collapsed baffle panel. We replaced the pan cover, treated the chase with a moisture barrier, and camera-scanned the flue to show the homeowner the active rust before recommending anything else. That’s the difference between a contractor and a Level 2 inspection. Call (980) 580-8641 and we’ll show you what you’re actually working with.
It’s likely both a crown and a cap problem, but you’d need a camera to know which one is driving the smoke smell. A cracked crown lets water into the chase, which corrodes the damper and breaks the seal, while a rusted cap can let downdrafts push smoke into the house even when the fireplace isn’t burning. On Sicklerville bi-levels, the chase runs through the center of the house, so smoke smells in upstairs bedrooms typically mean the chase interior has become compromised and is no longer venting properly. This is a carbon monoxide concern if you’ve been burning. We’ll camera-scan the flue, show you the condition, and tell you exactly whether the cap, the crown, the damper, or the liner is the culprit before quoting anything. Call (980) 580-8641 for a free estimate and a written scope.
Maybe, maybe not. A Level 1 inspection is a visual check from a technician’s vantage point, and it won’t catch a rusting pan cover or a failing chase top the way a Level 2 camera scan will. If your Sicklerville chase was built in the 1980s or 1990s and still has its original sheet-metal cap, the odds are high that it’s rusting at the seams even if it looked fine from the roof last year. Before you burn this fall, have the cap and crown camera-scanned. If they’re still sound, you’re good. If they’re not, a cap replacement now costs $420-$640 and prevents a firebox failure that costs thousands. Call (980) 580-8641 to schedule a cap and crown check before burning season. Estimates are free, and the price is written down before anything starts.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Sicklerville and the broader South Jersey area with NFPA 211 Level 2 camera-scan inspections since 2009.
Ready to get your Sicklerville cap or crown looked at by someone who will show you the actual condition? Call (980) 580-8641 today for a free estimate. A live person answers, 24/7, and you’ll get a written price before any work begins.