Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Reynoldsburg
Chimney cap and crown work in Reynoldsburg typically runs $340-$1,900 depending on whether you need a standard cap replacement, a multi-flue cap for a shared-flue ranch, or a full crown rebuild with coating. Most jobs are completed in a single visit, and every quote is written before any work begins. If you own one of the 1965-1985 tract homes off Brice Road or Taylor Road, there’s a good chance your chimney crown is due for serious attention this year. Call (980) 580-8641 and we’ll put a camera down your flue and show you exactly what we find before we recommend anything.
Why Emberly Chimney Cleaners Is Reynoldsburg’s Preferred Chimney Cap & Crown Company
Reynoldsburg’s housing stock has a specific problem, and we see it every week. The ranch and split-level homes built between 1965 and 1985 share a common design: one masonry chimney, one flue, and a wood-burning fireplace paired with the furnace. When that flue has no proper multi-flue cap, or when the crown has spalled from decades of freeze-thaw, water gets in, draft fails, and the chimney starts pulling smoke and carbon monoxide back into the house. Our Chimney Cap & Crown team has been through enough of these homes to know what a Reynoldsburg chimney should look like from the rooftop, and what it shouldn’t.
Every visit includes a camera scan under NFPA 211 Level 2 standards. We document what we find with photos, then we hand you a written price and scope before a tool comes off the truck. That’s Clause 1 of the Haven Standard, and it’s been our default since 2009, not a response to negative reviews or insurance requirements. Reynoldsburg homeowners tell us the same thing: they don’t want a flashlight look and a vague warning. They want to see the corroded cap collar, the spalled crown mortar, the water staining in the flue. So we show them.
Corrine Halstead leads our crew, and she’s particular about documentation. If a cap needs replacing, you’ll see the rust through the flue collar in the photo. If a crown needs coating, you’ll see the hairline cracks before we apply the Gelco. We don’t ask anyone to take our word for it.
Our Chimney Cap & Crown Services in Reynoldsburg
Cap Installation
A new chimney cap on a Reynoldsburg ranch or split-level typically runs $340-$680 installed. The cap itself matters less than the fit: too many of these 1970s and 1980s chimneys have odd flue dimensions from a small group of production builders who didn’t standardize. We stock a range of cap sizes and materials from Olympia Chimney and Copperfield so we can usually fit the same day. If the flue is an unusual size, we’ll quote a custom cap with a one-week turnaround written right on the estimate.
Cap Replacement
Reynoldsburg’s older zero-clearance fireplaces frequently have builder-installed caps that have corroded through at the collar. We replace those with galvanized or stainless caps sized to the existing termination, usually $380-$750 depending on material and access. The old corroded cap lets rain straight down into the firebox, which washes creosote down the walls and rusts the damper. If we find that during the camera scan, you’ll see it before we quote the replacement.
Crown Repair
This is the most common call we get from Reynoldsburg homeowners in October and November. Freeze-thaw crossing 32°F dozens of times each winter has spalled the crown mortar on thousands of these 40-60-year-old chimneys. Crown repair and rebuild in Reynoldsburg runs $650-$1,400 depending on how much of the existing crown is salvageable. A full crown replacement with a proper overhang and drip edge runs $1,200-$1,900. When we rebuild, we form the crown with a slope away from the flue and a drip edge that keeps water off the brick face. That’s the difference between a crown that lasts five years and one that lasts twenty.
Crown Coating
Crown coating on an otherwise intact crown runs $280-$520 in Reynoldsburg. We use Gelco for this work because it seals hairline cracks before they become spalling and water intrusion. Coating isn’t a substitute for a failed crown: if the mortar is already crumbling, coating just locks in the damage. We’ll tell you plainly which condition you have, with photos to support the recommendation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Reynoldsburg
We install and service caps and crowns from Gelco, Olympia Chimney, and Famco. These aren’t brands we picked from a catalog. Famco multi-flue caps fit the shared-flue ranch chimneys that dominate Reynoldsburg’s subdivisions off Taylor Road and Brice Road. Gelco crown coating handles central Ohio’s freeze-thaw punishment better than the thin sealers we see on DIY jobs. And Olympia’s standard cap line covers most of the flue sizes we encounter on the zero-clearance fireplaces from that era. Parts are kept in local stock for Reynoldsburg customers, so we’re not waiting on a distributor when your chimney is open to the rain.
Common Chimney Cap & Crown Problems We See in Reynoldsburg Homes
- Freeze-thaw spalling on crown mortar: Reynoldsburg’s winter temperatures cross the freezing line constantly, and water that has soaked into 40-year-old crown mortar expands every time it freezes. We see crowns with edges missing, flue tiles exposed, and water channels carved right down the brick face.
- Corroded zero-clearance caps from the 1970s and 1980s: The builder-installed caps on these fireplaces were thin galvanized steel that rusts through at the collar within a decade or two. Once that happens, rain enters the flue directly and the firebox starts rusting.
- Shared-flue chimneys without proper multi-flue caps: The single masonry chimney designed to serve both a wood-burning fireplace and a furnace is common across Reynoldsburg’s tract subdivisions. Without a correctly fitted multi-flue cap, the two flues interact, and smoke and carbon monoxide from the wood stove can be pulled into the furnace flue on a low-draft day.
- Cracked flue liners from water intrusion: A failing crown or missing cap lets water run down the flue interior. In Reynoldsburg’s older chimneys, that water wets the clay liner, freezes, and cracks it. We find this repeatedly during camera scans on homes where the owner only called us for a simple cap replacement.
Pricing for Chimney Cap & Crown in Reynoldsburg, OH
Here’s what Reynoldsburg homeowners can expect to pay in 2026:
- Cap installation (standard single-flue): $340-$680
- Cap replacement (galvanized or stainless): $380-$750
- Multi-flue cap (custom-fit for shared flue): $700-$1,400
- Crown repair (partial rebuild): $650-$1,400
- Full crown rebuild with drip edge: $1,200-$1,900
- Crown coating (Gelco): $280-$520
- Custom cap for unusual flue size: $650-$1,200
What changes the price is chimney height and roof pitch, flue configuration (single versus shared), and whether we need to remove a corroded cap or failing crown before installing the new one. Every estimate is written, itemized, and handed to you before work begins. No one starts a hammer drill on your roof until you have the number in writing. If you bring us a competitor’s written quote for cap or crown work in Reynoldsburg, we’ll give you a free second opinion on it. Call (980) 580-8641.
We Also Serve Cities Near Reynoldsburg
Our crews cover Chimney Cap & Crown in Reynoldsburg and the surrounding central Ohio communities, including Pickerington, Westerville, Columbus, and Grove City. Scheduling is coordinated from our Cleveland office, and our Reynoldsburg technicians live and work in this area. If you’re in a neighboring town with the same 1960s-through-1980s housing stock, we see the same flue-sharing and crown spalling problems every week.
Serving Reynoldsburg, OH - Our Local Coverage Area
We’re based in the Reynoldsburg area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Reynoldsburg
Because the crowns were poured thin with weak mortar, and central Ohio’s freeze-thaw cycle has been working on them for 40 to 60 years. Reynoldsburg’s winters cross 32°F constantly, and every freeze cycle widens the hairline cracks in that old crown mortar. The result is spalling, water intrusion, and cracked flue liners. Call (980) 580-8641 and we’ll show you the condition of your crown with a camera before recommending repair.
Yes, and in most cases you should. Reynoldsburg’s 1965-1985 tract homes frequently have one masonry chimney serving both a wood-burning appliance and the furnace. A proper multi-flue cap separates the two flue terminations so smoke and carbon monoxide from the wood stove can’t get pulled into the furnace flue. Famco makes a range of multi-flue caps that fit these specific chimney configurations, and we quote them in writing before ordering. Call (980) 580-8641 for a measurement visit.
The corroded cap lets rain into the flue, which cools the flue gases and causes creosote to condense on the liner walls faster than it otherwise would. Once water has been running down the flue for a season or two, the creosote that forms is dense and tarry, which is what we call third-degree creosote. We replaced a builder-grade zero-clearance cap on a split-level off Brice Road last fall where exactly this had happened. The homeowner’s wood stove was drafting poorly, and our camera scan showed third-degree creosote in the smoke chamber plus a cap rusted through at the flue collar. We installed a Famco multi-flue cap, coated the crown with Gelco, and the draft improved immediately. Call (980) 580-8641 if your cap looks rusted or your draft feels weak.
No. Crown coating is not an annual ritual. A properly applied Gelco coating on a sound crown lasts several years, and we only recoat when the camera or visual inspection shows the previous coat breaking down. If a company tells you every Reynoldsburg chimney needs annual coating, get a second opinion. We’ll tell you when coating is needed and when it can wait, with documentation to back it up. Call (980) 580-8641.
Often yes, because the alternative is leaving the flue exposed or installing a universal cap that doesn’t actually fit. Reynoldsburg’s 1980s production builders didn’t all use the same flue dimensions, so we regularly encounter chimneys where no standard cap sits correctly. A custom cap sized to the actual flue opening runs $650-$1,200 and usually installs in a single visit after the cap is fabricated. For a flue that’s been without a cap all winter, the cost of the custom work is less than the water damage it prevents. Call (980) 580-8641 and we’ll measure it the same week.
Reynoldsburg’s freeze-thaw cycle and 40-60-year-old shared-flue chimneys have made chimney cap and crown work a cluster-by-cluster repair wave, not a one-off job. When one neighbor needs a multi-flue cap or crown rebuild off Brice Road, the houses on either side typically need the same work within a season, because they were built by the same production builder with the same design. We see the same flue-sharing failure replicated across entire subdivisions off Brice Road and Taylor Road. If your chimney has been capless through a winter, or your crown has been spalling for years, don’t wait for the water to do more damage. Call (980) 580-8641 and we’ll put a camera down the flue, document what’s there, and hand you a written price before any work starts.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Reynoldsburg under the Haven Standard since 2009.