Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Ocoee
A chimney cap and crown replacement in Ocoee typically runs $380-$1,150 depending on whether we’re fabricating a custom cap for a rusted prefab chase or recoating a masonry crown. Most calls we make to Ocoee are for moisture defense, not creosote removal. The homes off Clarke Road, Maguire Road, and Story Road were built in the 1990s and 2000s with factory-built fireplaces, and those original galvanized chase covers are failing now, all at once. If you’ve noticed water stains on the ceiling near the fireplace or heard scratching from the flue, call (980) 580-8641 and we’ll get a Level 2 camera inspection scheduled.
Why Emberly Chimney Cleaners Is Ocoee’s Preferred Chimney Cap & Crown Company
We work on Ocoee chimneys every week, and the pattern is consistent: 25-to-30-year-old chase covers rusted through at the corners, open chases that became chimney swift or raccoon nests during the April-November off-season, and homeowners who had no idea anything was wrong until smoke backed into the living room on the first December fire. Our Chimney Cap & Crown crews know what to look for on these specific prefab systems before they even climb the ladder.
Every job starts with a camera scan done to NFPA 211 Level 2 standard, and you get the photos. Not a summary. The actual footage showing the rust, the nest, the missing cap, the cracked crown. Corrine Halstead runs our operation with a simple rule: no recommendation without visual evidence the customer can see for themselves. If your cap is fine and the crown is holding, we’ll tell you that and write it down. We don’t manufacture work.
Our pricing is written before anyone picks up a tool. Clause 1 of the Haven Standard requires it: written price, written scope, written warranty, delivered to you before the work starts. And every job is backed by the 365-Day Done Right Promise. If it’s not done right, we make it right.
Our Chimney Cap & Crown Services in Ocoee
Cap Installation
Standard single-flue caps in Ocoee run $380-$520 installed. Multi-flue caps on two-family or larger chases land between $650 and $900. The cap itself matters less than the fit. For Ocoee’s 1990s prefab units, we measure the chase opening precisely, because a cap that’s even a half-inch off lets the Lake Apopka humidity keep working on the metal underneath.
Cap Replacement
When the original galvanized cover has rusted through, we pull it, document the damage with photos, and fabricate a replacement. For most Ocoee tract homes, we’re installing custom Copperfield or Famco caps sized to the existing chase. A full replacement with fabrication typically runs $450-$750. This is the single most common job we do in Ocoee, and it’s the one that prevents the raccoon-in-the-chase situation before it happens.
Crown Repair
If you own one of the older masonry chimneys near Ocoee’s historic downtown, the crown is the concrete slab on top that sheds water away from the flue. Decades of Lake Apopka humidity and summer rain erode the mortar, hairline cracks open, and water works its way into the brick. Crown repair in Ocoee runs $500-$850 depending on the degree of spalling and whether we’re doing a partial repair or a full recast.
Crown Coating
For crowns that are structurally sound but showing surface cracking, we apply Gelco crown coating to seal the concrete and stop moisture penetration. On an Ocoee masonry chimney, this is more urgent than it would be inland. The ambient humidity south of Lake Apopka keeps the crown damp longer each year, widening cracks faster. Coating runs $350-$550 for a typical single-flue crown. It’s the least expensive thing you can do that prevents a much larger rebuild later.
Custom Cap & Multi-Flue Cap
For attached Ocoee tract homes with shared chase structures, off-the-shelf caps often don’t fit right. We fabricate custom caps to span the full chase opening, with individual flue openings positioned for each appliance. Custom fabrication runs $600-$950. Multi-flue caps on shared chases run $700-$1,100. This is the service that solves the neighbor problem we describe below.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Ocoee
We source materials from Copperfield, Famco, and Gelco, purchased through Haven’s buying network to keep prices honest for Ocoee customers. When a 1997 tract home off Story Road needs a replacement cap, we’re not ordering from a catalog and waiting a week. We carry standard sizes on the truck and fabricate custom pieces locally, which means your new cap goes on the same visit as the inspection in most cases. No second trip, no second service fee.
Common Chimney Cap & Crown Problems We See in Ocoee Homes
- Rusted-through chase covers on 1990s prefab fireplaces. The original galvanized steel on an Ocoee tract home built in 1995-2005 has typically failed by now. Lake Apopka’s humidity accelerates oxidation, and the corners go first. Once a hole opens, rain and humid air pour into the chase and soak the firebox and flue liner.
- Wildlife nesting in idle April-November chases. A fireplace used a half-dozen times a year is a hotel for chimney swifts and raccoons. By the time you light the first December fire, the flue is packed with nesting material and the smoke has nowhere to go but back into the living room.
- Cross-contamination on shared chases in attached tract homes. If your neighbor’s cap is rusted out on a shared stack, their exhaust, embers, and moisture can migrate into your flue. You can have a perfect cap and still get smoke or carbon monoxide intrusion because of the unit next door.
- Cracked and spalled crowns on older masonry chimneys. Near Ocoee’s historic downtown, the masonry chimneys are 40-70 years old. Crowns crack, water seeps in, freeze-thaw cycles don’t apply here but the constant damp does its own damage. Spalling brick and eroding mortar joints are the visible warning signs.
Key Takeaways
- Cap replacement in Ocoee runs $450-$750; crown coating runs $350-$550.
- Most Ocoee cap failures are rust-through on 1990s prefab chase covers, not creosote buildup.
- Every job includes a camera-scan inspection with photo documentation.
- Written price before work starts, always. That’s Haven Standard Clause 1.
- 365-Day Done Right Promise on every installation and repair.
Pricing for Chimney Cap & Crown in Ocoee, FL
Here’s what you can expect to pay for cap and crown work in Ocoee right now. Standard cap installation: $380-$520. Cap replacement with custom fabrication: $450-$750. Crown repair: $500-$850. Crown coating: $350-$550. Custom cap for an attached shared chase: $600-$950. Multi-flue cap: $700-$1,100. What moves the number is whether the chase is standard or odd-sized, whether the crown needs full recasting or just coating, and whether we’re fabricating something custom or pulling a stock cap off the truck. The written quote you get includes everything: materials, labor, haul-away, and the photo documentation record. Call (980) 580-8641 for a free estimate, and you’ll have a written price before anyone starts any work.
We Also Serve Cities Near Ocoee
Our service area covers Ocoee and the surrounding Orange County communities, including Apopka, Winter Garden, Orlando, and Altamonte Springs. If you’re just outside the city limits, we can still get to you. Dispatch is coordinated from our Orlando office, with crews serving Ocoee locally.
Serving Ocoee, FL - Our Local Coverage Area
We’re based in the Ocoee area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Ocoee
The cap isn’t about smoke; it’s about water. Ocoee’s 1990s tract homes were built with factory prefab fireplaces with galvanized sheet-metal chase covers on top, and those covers rust through after 25-30 years in the Lake Apopka humidity, even if the fireplace has never been lit once. Once the corners rust open, rain and humid air pour into the chase and damage the structure and liner. That’s the Ocoee cap problem in a sentence, and the fix is a replacement cap with proper sizing and sealant, typically $450-$750. Call (980) 580-8641 and we’ll camera-scan your chase to show you exactly what’s leaking.
Yes, and it’s the only thing that reliably does. The standard cap that came on your 1990s prefab may have had a mesh screen, but once the chase cover rusted or the screen tore, the flue was open. A custom cap fabricated to your exact chase dimensions with intact screening keeps birds and animals out. We pulled a raccoon nest out of a 1997 chase off Maguire Road and replaced the failed cover with a custom Copperfield cap sized to the chase. No animal has gotten back in. Our custom caps in Ocoee run $600-$950. Call (980) 580-8641 for a free, written quote.
Crown coating is a waterproof sealant applied to the concrete crown on a masonry chimney. It’s more urgent in Ocoee because Lake Apopka drives up ambient humidity, keeping the crown damp longer after each rain and accelerating crack widening. A crown that would last five years inland loses its seal in three here. Coating a structurally sound crown runs $350-$550. The photo report we give you will show the crack pattern before and the sealed surface after. For a free estimate, call (980) 580-8641.
Yes, absolutely. On attached Ocoee tract homes with shared or adjacent flues in the same chase structure, a rusted-open cap on the neighboring unit can allow exhaust, moisture, or embers to migrate into your flue cavity. You may get smoke backing into your living room even if your own cap is perfect. This cross-contamination pattern is common in the 1990s attached subdivisions off Clarke Road and Story Road. The solution is often a multi-flue cap or custom chase cap that seals the entire structure, typically $700-$1,100. Call (980) 580-8641 and mention your neighbor’s situation; we’ll camera-scan the whole chase, not just your side.
Every 20-25 years, and sooner if you see rust streaks, missing corners, or hear anything moving inside the chase. Most Ocoee prefab fireplaces are now past that window. The original galvanized covers installed in the mid-1990s are failing right now, in 2025 and 2026. If your cap is original and your house was built before 2005, assume it’s time. A replacement inspection and written quote are free. Call (980) 580-8641.
What Ocoee Homeowners Should Know About Cap and Crown Work
On a street off Maguire Road, our crew found a 1997 tract home with a sheet-metal chase cover rusted through at the corners and a raccoon nest packed into the flue chase. We pulled the old cover, fabricated a custom Copperfield cap to fit the chase, and sealed the crown with Gelco coating before the first December fire could push smoke back into the living room. That’s the Ocoee job in one paragraph. It’s not about creosote. It’s about what happens when Lake Apopka humidity and 30 years of Florida rain meet a piece of galvanized steel that was never meant to last this long.
For the older masonry chimneys around Ocoee’s historic core, the work is different but the logic is the same. The crown is the water shed, and once it fails, water gets into the brick and keeps working every humid month. Crown coating is cheap. Crown replacement is not. Neither is a full rebuild.
If you’re in Ocoee and you haven’t looked at your chimney cap or crown in a decade, the camera scan costs you nothing to schedule and you’ll see exactly what we see. Written price before work starts. Photo record when it’s done. 365-Day Done Right Promise on every job. Call (980) 580-8641.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Ocoee and greater Orange County.