Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Noblesville
Most homes in Noblesville don’t have a traditional masonry chimney crown at all. They have a metal chase cover on a prefabricated fireplace, and after 20 to 30 Indiana winters, that cover rusts through and starts pouring water directly into the firebox. A chimney cap and crown replacement in Noblesville typically runs $385 to $950 for chase covers on factory-built systems, and $800 to $1,700 when old masonry near the downtown square needs crown repair plus a cap. If you’re seeing water streaks above the fireplace, rust on the cap, or a musty smell every spring, call (980) 580-8641 and we’ll send a tech out with a camera. Everything gets quoted in writing before any work starts.
Why Emberly Chimney Cleaners Is Noblesville’s Preferred Chimney Cap & Crown Company
Emberly Chimney Cleaners is independently owned and operated, led by Corrine Halstead, and we’ve completed over 38,000 chimney inspections and cleanings since 2009. Every one of those jobs came with a written price before work started and a documented photo record when it was done. That’s not a perk. Clause 4 of the Haven Standard requires it, and it’s been our default since day one.
Noblesville homeowners call us because the inspection standard matches our name: NFPA 211 Level 2, camera down the flue, no exceptions. When we look at a chase cover on a 1997 zero-clearance fireplace in Sagamore or a cracked mortar crown on a brick home near the courthouse square, you see the photos yourself. You don’t take our word for anything.
Our techs are background-checked and uniformed. Your license number sits on every page of the estimate, and you get a text when the crew is on the way. We coordinate scheduling from our Indianapolis office and serve Noblesville locally, with response times that work for your calendar, not ours.
Corrine Halstead has built this company around a simple idea: show the homeowner what’s actually in the flue, quote the repair in writing, and stand behind it. The 365-Day Done Right Promise is stamped on every job. If it’s not done right, we make it right. No drama, no call center script.
Our Chimney Cap & Crown Services in Noblesville
Our Chimney Cap & Crown team handles everything from rusted chase covers in Hazel Dell to cracked masonry crowns near the White River. Here’s what we do most often in Noblesville.
Cap Replacement
A chimney cap replacement in Noblesville on a prefab fireplace usually means replacing the entire chase cover, not just the small screened cap on top. The builder-grade galvanized steel chase covers installed throughout Hamilton County in the 1990s and 2000s rust through at the folded corners. We remove the old cover, install a stainless or Copperfield aluminum chase cover sized to the chase, and mount a properly fitted cap. Written scope before we start, photo record when we finish.
Cap Installation
Some Noblesville homes built in the 2000s never got a proper cap at all, or the cap was damaged by a storm and never replaced. We install multi-flue caps on masonry systems and single-flue caps on prefab units, always sized to the actual flue dimensions. A properly installed cap keeps rain, birds, squirrels, and debris out. The mesh size matters. Too small and it clogs with creosote. Too large and animals get in. We measure, we don’t guess.
Crown Repair
On the original brick chimneys near downtown Noblesville, the crown is the concrete slab that sits on top of the chimney and sheds water away from the flue. Freeze-thaw cycles from November through March crack these crowns. Water gets in, freezes, expands, and the crown spalls further. We repair crowns with proper wash angle and expansion joints, not a bag of mortar smeared over the cracks. For chimneys with heavily spalled brick or failed flashing, we’ll tell you honestly whether a crown repair is enough or whether you’re looking at something bigger.
Crown Coating
For crowns that are still structurally sound but showing hairline cracks, we use a CrownCoat or HeatShield crown sealer. This is a flexible, waterproof membrane that bridges small cracks and prevents water entry. It’s not a cosmetic paint job. We’ve used it on older homes near Forest Park where the crown is intact but the surface has started to absorb water. The catch: if the crown is too far gone, coating it is a waste of your money. We’ll tell you that directly, with camera evidence to back it up.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Noblesville
We stock and install parts from Copperfield, DuraFlex, Gelco, and Olympic Chimney. When a 1998 builder-grade chase cover in Noblesville needs replacing, we’re not ordering parts and making you wait two weeks. We carry Copperfield stainless chase covers and matching caps in common sizes, and DuraFlex liners for flue relining work. Our materials are sourced through Haven’s buying network so the pricing stays honest. You get a written warranty on the parts and the labor, and you know exactly what brand went on your house before we install it.
Common Chimney Cap & Crown Problems We See in Noblesville Homes
- Rusted-through builder-grade chase covers on 1990s prefab fireplaces. These were the low-bid galvanized steel covers installed by the thousands during Hamilton County’s growth boom. In subdivisions like Hazel Dell and Sagamore, they rust through at the folded seams and direct rain and snowmelt straight into the firebox. On a cul-de-sac in Sagamore, our tech pulled a 1997 original chase cover that had rusted through at the seams and was dripping directly onto the refractory panels of a zero-clearance firebox. We replaced it with a Copperfield stainless chase cover and a screened cap sized to the flue, then ran a Level 2 camera up the liner to confirm no hidden creosote or water damage before calling it good.
- Freeze-thaw crown cracking on older masonry chimneys. The brick homes near the downtown courthouse square have original mortar joints and crowns that see constant freeze-thaw stress from November through March. Water seeps into hairline cracks, freezes, expands, and turns a small crack into a spalled crown within two winters.
- Moisture-driven liner degradation near the White River corridor. Homes in low-lying areas close to the river see accelerated flue liner breakdown because persistent moisture wicks into clay tile or metal liners. This causes draft problems and first-degree creosote buildup even when the cap looks fine from the ground.
- Musty odors every spring from water sitting in the firebox. When a chase cover rusts through, water pools on the refractory floor of a zero-clearance fireplace. By spring it’s stale and musty, and homeowners in Noblesville start smelling it even when the fireplace hasn’t been used in months.
Pricing for Chimney Cap & Crown in Noblesville, IN
What moves the number: chase size on prefab units, roof pitch and height, and whether the crown needs full reconstruction or just coating. Every estimate is written, itemized, and handed to you before any work begins. Clause 1 of the Haven Standard: written price, written scope, written warranty. You never call us and get a vague verbal ballpark. Call (980) 580-8641 for a free estimate with camera documentation.
We Also Serve Cities Near Noblesville
We handle chimney cap and crown work throughout Hamilton County, including Westfield, Fishers, Carmel, and Zionsville. The same camera-scan standard applies everywhere we go. If you’re in a neighboring city and dealing with a rusted chase cover or cracked crown, call (980) 580-8641 and we’ll schedule you.
Serving Noblesville, IN - Our Local Coverage Area
We’re based in the Noblesville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Noblesville
My Noblesville home was built in 2005 with a factory fireplace-do I even have a chimney crown, or is that a masonry thing?
No, you don’t have a traditional masonry crown. Your prefab fireplace has a metal chase cover, which is a flat metal lid that sits on top of the chase (the framed box enclosing the flue). It serves the same purpose as a masonry crown: keeping water out. But it’s metal, it rusts, and on 2005-era Noblesville construction it was almost certainly builder-grade galvanized steel. By now it may be rusted through at the seams. Call (980) 580-8641 and we’ll put a camera on it and show you what we see.
How often should the chase cover on a prefab fireplace in Noblesville be inspected or replaced?
At least once a year, and more often if you notice water stains or musty smells. The combination of Indiana freeze-thaw cycling, spring rainfall, and the age of Noblesville’s housing stock means these covers fail faster than homeowners expect. We check the chase cover on every inspection, before we even set up a cleaning brush. If it’s rusted through or close to it, we show you the photo and quote a replacement in writing.
Can you coat a rusted chase cover instead of replacing it?
Usually not. A rusted-through chase cover has holes, not just surface rust. Coating it with a sealant is a temporary patch that will fail again, usually within one season. If the metal isn’t actually perforated, we may be able to clean and reseal it. That’s the honest answer, and we’ll show you the camera footage to back it up. If you’re in Noblesville, call (980) 580-8641 and we’ll take a look before recommending anything.
What is the difference between a chimney cap and a chase cover on a Noblesville prefab fireplace?
The chase cover is the large metal lid that covers the entire top of the chase, the framed structure that encloses the flue pipe. The chimney cap is the smaller screened cover that sits on top of the flue pipe itself and keeps animals and debris out. Both can fail independently, but on 20 to 30 year old prefab systems in Noblesville, the chase cover almost always fails first. If you’re not sure which one you have, we’ll show you with a photo.
Why does my 1998 prefab fireplace in Noblesville smell musty every spring even though I don’t burn much?
Because water is getting into the firebox. A 1998 prefab in Noblesville likely has an original galvanized chase cover that has rusted through and is dripping into the fireplace during rainstorms and snowmelts. The water sits there, stagnates, and produces a musty odor that rises through the flue into the house. The fix is replacing the chase cover and checking the liner for water damage with a camera. Call (980) 580-8641 for an exact diagnosis. Estimates are free and always in writing.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Noblesville since our founding in 2009.