Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Milton
Chimney cap replacement in Milton typically costs $340-$680 for a standard single-flue stainless cap, while full crown repair with coating runs $850-$1,600 depending on crown condition and chase access. Most Milton properties have more than one flue, which changes the scope: a multi-flue estate home with three fireplaces often needs $1,400-$2,800 in combined cap and crown work. We’re Emberly Chimney Cleaners, and we’ve worked Milton’s larger properties long enough to know the job rarely stops at one chimney. If you’re seeing water stains near the firebox, hearing animals in the flue, or noticing spalling brick at the chimney top, call (980) 580-8641 and we’ll bring the camera up and show you exactly what’s happening.
Why Emberly Chimney Cleaners Is Milton’s Preferred Chimney Cap & Crown Company
Milton customers call us because the house has three fireplaces and nobody explained at closing that each flue ages on its own schedule. Our inspectors work to NFPA 211 Level 2: the camera goes down every flue, not just the one with the obvious problem. That matters on a 2005 estate off Hopewell Road where the great-room chimney looks fine but the terrace-level zero-clearance flue has been collecting rain through a missing cap for years. Corrine Halstead runs our operation, and the standard she set in 2009 still governs every job: written price, written scope, written warranty, and a photo record you keep. Clause 4 of the Haven Standard requires that documentation on every single visit, and it’s been that way since our first Milton inspection.
We answer the phone with a live person, 24/7. You’ll get a named technician, a text when they’re en route, and a background-checked uniformed crew at your door. That’s the H.A.V.E.N. standard: arrive on schedule, verified crews, everything in writing. If we miss something, the 365-Day Done Right Promise means we come back and make it right. You don’t chase us.
Our Chimney Cap & Crown Services in Milton
Most Milton homes have mixed systems: a masonry chimney on the great room, one or two factory-built zero-clearance units on the terrace level or master suite, and an outdoor hearth that runs on its own flue. Our Chimney Cap & Crown team works across all of them on one appointment. Here’s what that looks like.
Cap Installation
A properly sized cap keeps rain, leaves, and nesting animals out of the flue liner. On Milton homes from the 2000s boom, we regularly find factory-built fireplaces that never had a cap installed at all, which is how you get water damage in the smoke chamber and premature refractory panel failure. A new stainless cap with a screen, sized to the flue tile, runs $340-$520 installed on a standard single flue. Custom stainless or copper caps for larger openings run $600-$1,100.
Cap Replacement
Milton’s position in the North Fulton foothills means wind-driven rain hits chimney tops harder than it does in central Atlanta. Rusters, loose mesh, and bent lids from falling branches are common calls. We replace with stainless steel from Olympia Chimney or Famco, and we’ll show you a photo of the old cap before we remove it. Expect $380-$680 depending on flue diameter and roof access. If the cap has failed because the crown underneath is spalling, we’ll say so before we quote anything.
Crown Repair
This is the big one on 2000s-era Milton builds. The concrete crown sits at the very top of the masonry chimney, and when it cracks, water gets into the chase and starts spalling brick and rusting the damper above the firebox. On a 2006 estate near the Birmingham Falls area, we replaced a rusted single-flue cap on a great-room chimney while also finding a cracked crown on the prefabricated flue serving the finished terrace level. We repaired both crowns with full wash and overhang, the fix that actually sheds water instead of pooling it. Crown repair with waterproof coating runs $850-$1,600 for a standard chase. Multi-flue crowns run higher.
Crown Coating
If the crown is structurally sound but starting to absorb water, Gelco CrownCoat is the right call: a flexible elastomeric coating that moves with the masonry through Milton’s freeze-thaw cycles. We saw crowns that looked fine from the ground but showed hairline cracks under camera close-up. Coating now prevents the expensive repair later. Runs $450-$750 per crown, and it’s included in any full cap replacement when the existing crown passes inspection.
Multi-Flue Cap
Milton’s estate homes routinely have three to five separate fireplace systems: great room masonry, master suite insert, terrace level, outdoor hearth. A single multi-flue cap from Copperfield or Olympia Chimney covers the entire chimney top and stops the leaks at every flue at once. If your chimney has two or more clay tile flues side by side, this is usually the cleaner solution than capping each one separately. Custom-fabricated to the chase dimensions, runs $1,100-$2,200 installed.
Custom Cap
When the chimney is architectural, which happens a lot in a city where the home itself is the amenity, we fabricate to spec. Copper caps with powder-coat color matching, oversize screens for restaurant-grade outdoor hearths, wind-rated caps for chimneys above 1,000 feet in northern Milton. We’ll quote from photos and site measurements, never from a catalog price. Custom work starts at $1,200 and goes where the design takes it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Milton
We stock stainless caps from Olympia Chimney and Famco, and we coat crowns with Gelco, which has held up well on Milton chases through repeated North Fulton freeze-thaw cycles. We also use Copperfield for custom and multi-flue fabrications. Because we source through Haven’s buying network, the price you pay in Milton isn’t inflated by the cost of us running around town for parts. We carry the common sizes on the truck. If we need something custom, it’s fabricated locally and installed within two weeks on a written schedule.
Common Chimney Cap & Crown Problems We See in Milton Homes
- Cracked crowns on 2002-2010 masonry chimneys. The crown was poured thin at construction, and water has been getting in for a decade. By the time you see spalling brick on the chimney face, the damper above the firebox is usually rusted, too.
- Missing or improperly sized caps on outdoor hearth flues. Rain, leaves, and nesting animals get into the flue liner, creating draft problems the homeowner blames on the firewood. The fix is a correct cap, not better wood.
- Zero-clearance fireplaces without caps. The flue on a prefabricated unit is smaller and easy to overlook at inspection. Water damage in the smoke chamber and cracked refractory panels follow within a few seasons. The camera inspection catches this before the panel replacement gets expensive.
- Wind-driven rain bypassing undersized caps. Milton’s elevation and foothill winds push rain sideways into flue openings that a standard cap screen can’t block. A properly sized cap with deeper side screens solves it; the generic cap from the home center won’t.
Pricing for Chimney Cap & Crown in Milton, GA
Here’s the honest Milton market, as we see it on the truck every week:
- Single-flue stainless cap, installed: $340-$520
- Cap replacement (rusted or missing, standard size): $380-$680
- Custom stainless or copper cap: $600-$1,100
- Crown repair with full wash and overhang: $850-$1,600 per chase
- Gelco crown coating: $450-$750 per crown
- Multi-flue cap, fabricated to chase: $1,100-$2,200
- Estate-home package: inspection, cap replacement, crown coating on 3+ flues: $1,400-$2,800
These are written prices, delivered before work starts, and they don’t change after we get on the roof. That’s the entire point of the way we quote: you see the scope, the price, and the warranty in writing before anyone picks up a tool. Call (980) 580-8641 for a free estimate on your Milton home. If you have a written quote from another company, bring it to us for a Free Second Opinion under the Haven Standard.
We Also Serve Cities Near Milton
While we spend most of our week in Milton, our crews also cover Atlanta, Sandy Springs, Roswell, and Johns Creek. If you’re on the border, say off Birmingham Highway near Crabapple, call and ask; we’ll tell you honestly if we’re already in your area that week and can combine the trip. Dispatch works from the Atlanta metro office, but the trucks are local to North Fulton every day.
Serving Milton, GA - Our Local Coverage Area
We’re based in the Milton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Milton
Yes, every flue gets its own camera pass. A masonry great-room chimney and a zero-clearance terrace-level flue fail for different reasons, and the camera catches different things. Our Level 2 inspection covers each flue and crown on the property, and the photo record you receive shows each one individually. One flue can be clean while another is packed with a squirrel nest; only a per-flue inspection finds that. Call (980) 580-8641 and we’ll tell you exactly what’s on top of each chimney before you spend anything.
The rest of the masonry is doing its job; the crown was often an afterthought at construction. Builders poured thin, flat crowns without proper overhang or a drip edge, and two decades of North Fulton rainfall and freeze-thaw cycles did the rest. The chimney face can look perfect while the crown is spider-webbed with cracks. The fix is a proper crown rebuild with wash and overhang, not another layer of sealant. We’ll show you the camera footage before we recommend anything.
It can, if the smoke is caused by wind passing over the flue opening and creating a downdraft. A custom cap with the right screen and a taller lid profile can change the airflow enough to stop the back-puffing. Some Milton chimneys above the Birmingham Falls ridgeline catch open wind that a standard cap can’t deflect. We’ll test the draft with the camera first and then recommend the cap if the problem is wind, not flue sizing.
You don’t, until someone runs the camera up. The terrace-level flue on a factory-built fireplace is short, hidden behind chase cladding, and nobody looks at it during a standard home inspection. The camera shows us the interior of the flue and the crown condition in one pass, and we hand you the photos. This is the single most common surprise on Milton estate homes: a beautiful great-room fireplace that passed inspection, plus a terrace-level unit with water inside the chase. It’s exactly why Clause 4 of the Haven Standard requires the photo record on every job.
For two flues side by side on the same chimney, usually yes. A custom multi-flue cap from Copperfield or Olympia Chimney covers both openings with one watertight install, and it costs less than two custom single-flue caps when you factor the labor of working the roof twice. For chimneys on opposite ends of the house, separate caps make more sense. We’ll measure both chases and give you the written comparison, so you can see the numbers before deciding. Call (980) 580-8641 and we’ll come out to measure.
Contact Emberly Chimney Cleaners for Chimney Cap & Crown in Milton
If you own a Milton estate with more than one fireplace, you know the annual inspection schedule gets complicated. We make it simple: one appointment, every flue camera-scanned, every crown documented, written prices for anything that needs work, and a 365-Day Done Right Promise behind the whole thing. Corrine Halstead has built this company on one idea since 2009: show the customer what we found and tell them what it costs before we touch anything. Call (980) 580-8641 for a free estimate, or to schedule your Milton inspection. The camera goes down every flue, and you keep the photos.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Milton since the company’s founding in 2009 under the Haven Standard.
Chimney Cap & Crown in Nearby Areas