Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Midwest City
Chimney cap and crown work in Midwest City typically runs $225-$680 for most single-flue brick ranch homes, and we can usually schedule your inspection within a few days, not weeks. That’s the honest range, in writing, before anyone touches your chimney. Our crews know the post-WWII brick ranches that dominate this city block by block, and we understand exactly why the original crowns on these homes are failing at the same time. Call (980) 580-8641 and we’ll put a real person on the line who can talk specifics, not a script.
Why Emberly Chimney Cleaners Is Midwest City’s Preferred Chimney Cap & Crown Company
We’re not the oldest name in Midwest City, and we won’t pretend to be. What we are is the company that made camera-scan documentation the default back in 2009, when most sweeps were still charging for a flashlight look and calling it an inspection. That practice became Clause 4 of the Haven Standard: a documented photo record on every visit, handed to you before you make any decision. Homeowners in Midwest City tell us the same thing again and again: they want to see the damage before they pay to fix it. So do we.
Our technicians are background-checked, uniformed, and their license information is printed on every job record we leave behind. When you book a cap or crown inspection, you get a named tech assigned, a text when they’re on the way, and a written price with a written scope before any work starts. No surprises after the fact. That’s Haven Standard Clause 1, and it’s been our rule since day one.
Corrine Halstead runs our operations, and she’s built the crew around a simple idea: Midwest City homeowners can handle the truth about their chimneys if you show them the evidence. We do. Every time.
Our Chimney Cap & Crown Services in Midwest City
Cap Installation
Most original 1947-1960s brick ranches in Midwest City were built without any chimney cap at all. The flue tile just ends, open to Oklahoma weather. We install stainless steel caps sized to your specific flue dimensions, not the adjustable one-size-fits-all caps that rattle loose in wind. In the older neighborhoods south of SE 29th and east of Air Depot, we commonly find flue tiles that measure 8×13 or 8×17, which means a custom cap is almost always the right call, not a box-store universal.
Cap Replacement
Rusted, bent, or animal-damaged caps are common in Midwest City because of the ice storms. When the original cap has been on for 20 years or more, the mesh rusts through and squirrels get in. We’ll pull the old cap, document the flue condition with our camera, and recommend a replacement based on what we actually see, not what the warehouse has in stock. If the flue tile below the cap is spalled or cracked, replacing just the cap is a band-aid. We’ll show you the photos and let you decide.
Crown Repair
This is the service we emphasize most for Midwest City’s original brick ranches. The cast-in-place crowns put on in the 1950s were typically poured flush with the brick line, with no overhang and no drip edge. Decades of freeze-thaw cycling in Oklahoma’s ice storms have cracked them in predictable starburst patterns. We repair crowns by rebuilding the top with a properly overhanging cast crown that sheds water away from the brick, not into it. In the south and southeast neighborhoods under Tinker’s flight corridors, we also address the mortar joint loosening that vibration has accelerated over the years.
Crown Coating
When a crown is structurally sound but porous, a high-quality sealant like Gelco’s crown coat can buy years of service life. This is appropriate for crowns with minor surface cracking but no structural displacement. We’ll be honest if coating is the wrong call. On a Midwest City chimney with real spalling or a cracked crown that’s delaminating from the flue, coating is a waste of your money. We’ll tell you that in plain terms and show you why with our camera footage.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Midwest City
We stock and source materials from DuraFlex, Copperfield, and Olympia Chimney, which means we can typically complete cap and crown work in Midwest City without waiting on special orders. For custom caps on the oversized flues we see on the original Tinker-era ranches, Copperfield’s fabrication gives us the flexibility to match exact dimensions rather than forcing a stock size. We carry these because they hold up to Oklahoma’s ice loading and sun exposure, not because they’re cheap. Your written quote tells you exactly what’s going on your chimney, by brand and part number.
Common Chimney Cap & Crown Problems We See in Midwest City Homes
- Clay flue tiles cracking from expansive soil heave. Midwest City sits on expansive clay. When the soil swells and shrinks through wet-dry cycles, it shifts the foundation of the chimney base, which can offset interior flue tile sections. We see this most often as cracked flue tiles at the top, just below the crown line.
- Cast-iron dampers seized solid. In 1950s ranches across Midwest City, the original cast-iron damper is almost always corroded shut. When it can’t open, moisture and acid vapor trapped below the cap accelerate crown and flue liner deterioration. A seized damper is a red flag we check on every cap or crown visit.
- Crown-to-brick mortar loosening from Tinker flight-line vibration. On the south and southeast sides of Midwest City, decades of low-frequency vibration from KC-135 tankers and C-17s have worked mortar joints loose below the crown line. We see hairline cracking that’s actually a sign of cap shifting, not just weather aging.
- Freeze-thaw spalling on flush-poured crowns. The original crowns were poured with no overhang. Water sits against the brick line, freezes, and pops the crown surface. This is a southern-plains ice storm signature, and Midwest City gets hit hard because the original subdivisions were built so tightly together that rooftop wind exposure is consistent block to block.
Pricing for Chimney Cap & Crown in Midwest City, OK
Here’s what we charge in Midwest City, in writing, before work begins. A standard stainless cap installation on a single-flue ranch runs $225-$395 depending on flue size and whether we need a custom size. Crown repair with a cast-in-place overhanging crown runs $450-$680 for typical Midwest City brick ranches. Crown coating runs $195-$310 when the crown is a candidate. Custom copper or stainless caps for multi-flue chimneys run $575-$950. Every price includes our camera-scan inspection, a written scope, and a photo record when the job is done. Call (980) 580-8641 and tell us what you’re seeing. We’ll give you a real number, not a “we’ll see when we get there.”
Here’s what affects the final price: flue tile dimensions, whether the crown reinforcement needs mesh or rebar, access height and roof pitch, and whether we’re replacing a cap or rebuilding the crown. None of these are surprises. They’re line items on the written quote you get before we start.
We Also Serve Cities Near Midwest City
Our crews cover the entire Midwest City area plus Oklahoma City, Norman, Edmond, and Moore. If you live in one of the older neighborhoods around Tinker or further out in the metro, the same camera-first standard applies. For complete details on what Chimney Cap & Crown service includes, start with our full service explanation.
Serving Midwest City, OK - Our Local Coverage Area
We’re based in the Midwest City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Midwest City
Midwest City’s original homes were built fast, between 1947 and the early 1960s, to house Tinker Air Force Base workers. The crowns were poured flush with the brick with no overhang, using a softer mortar mix than modern code allows. Add Oklahoma’s punishing ice storm freeze-thaw cycles and the expansive clay soils under these slabs, and you get crown failure at a rate we don’t see in Oklahoma City neighborhoods with newer construction or better original masonry. Plus, on the south and southeast sides, decades of low-frequency vibration from heavy aircraft have loosened the crown-to-brick mortar joints. The damage compounds. If you want a straight answer for your specific chimney, call (980) 580-8641 and we’ll put it on camera.
Yes, if the cracking is superficial and the crown is still bonded to the flue tile, we can repair it with a high-bond overlay or coat it with Gelco’s crown sealant. But if the crown has spalled in chunks, separated from the flue, or the brick courses below it are already water-damaged, a repair won’t hold. We’ll show you the difference on our camera feed. You’ll see exactly what we see before you spend a dollar. Then call (980) 580-8641 and we’ll put together a written plan.
You need it. Here’s why: if the flue tile below the cap is cracked or offset from expansive soil movement, a new cap protects nothing. The water enters below the crown line and you’ve paid $300 for a hat on a compromised stack. A camera scan costs you nothing extra on our visits. It’s part of every job we do. We’d rather show you a chimney that doesn’t need work than sell you a cap that won’t fix the real problem. That’s how we’ve done it since 2009, and it’s why we’ll never tell you something without the footage to prove it.
A properly sized stainless steel cap with a mechanically attached base, not a pressure-fit adjustable collar. Pressure-fit caps work loose under sustained vibration. In the flight-path neighborhoods south of SE 29th, we see caps that were installed five years ago already rocking in the mortar. A custom cap sized to your exact flue, secured with stainless machine screws or a band clamp, holds its position through ice loading and steady low-frequency vibration. Copperfield and DuraFlex both make caps we trust for this specific application. Call (980) 580-8641 and we’ll measure your flue properly, in person, with a camera down the stack first.
Every two years at minimum, and annually if you live in the original Tinker plat under the active flight lines on the south or southeast side. The vibration and the clay soils mean small crown cracks become structural problems faster here than in Edmond or Moore. If your chimney hasn’t been camera-inspected in the last five years, call (980) 580-8641. The inspection is part of every visit, and you’ll get a photo record to keep whether or not we recommend work.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Midwest City under the Haven Standard since 2009.