Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Medina
A chimney cap replacement or crown repair in Medina typically runs $285-$640 for most single-flue prefab and masonry work, and we can usually have a tech to your home within 3-5 business days depending on the season. We’re Emberly Chimney Cleaners, and we work the streets off Weymouth Road, Fenn Road, and around the square every week. Before we recommend anything, we put a camera down your flue and show you exactly what we found. You’ll get a written price, written scope, and written warranty before any work starts. Call (980) 580-8641 to book a sweep-and-inspect or a cap and crown evaluation.
Why Emberly Chimney Cleaners Is Medina’s Preferred Chimney Cap & Crown Company
Medina homeowners don’t want a flashlight look and a sales pitch. They want evidence. That’s been our operating rule since 2009, when we made camera-scan documentation standard on every visit. It’s Clause 4 of the Haven Standard: every job gets a documented photo record when it’s done. We hand you the images. You see the cracked crown, the rusted chase cover, the separated flue liner. You decide what’s real. Corrine Halstead, who leads our Medina crews, has walked hundreds of these job sites and she will tell you plainly when a cap can wait and when it cannot.
Reviews from Medina customers consistently mention the same thing: the tech showed them the camera footage before quoting anything. That’s the whole model. No upselling on a liner you can’t verify. No “you need a full rebuild” without pictures. If a competitor hands you a written estimate for a crown coating or cap replacement, bring it to us. We’ll give you a free second opinion on it. We’re not here to scare you. We’re here to document what’s actually happening and price the fix at what it costs.
Our Chimney Cap & Crown Services in Medina
Cap Installation
Most Medina chimneys we see need a new cap, not just a cleaning. A proper stainless cap keeps rain, snow melt, and the occasional raccoon out of your flue. On the 1970s-80s ranch homes off Fenn Road and Pearl Road, we commonly install multi-flue caps because the original builder caps were thin-gauge and never intended to last 35 years. We stock Copperfield and Olympia units sized for the prefab chases common across Medina’s suburban ring.
Cap Replacement
If you have a rusted sheet-metal chase cover on a prefab fireplace, you are looking at a 30-to-40-year failure point. We see this daily in Medina. The cover rusts through, water drips into the chase, and the framing behind the vinyl siding rots. By the time a homeowner notices staining on the chase exterior, the flue liner has often separated at the offset. We pull the old cover, document what’s underneath, and replace it with a stainless unit before the freeze-thaw cycle widens the gap. This is one of the more common cap replacement jobs we do in Medina, and it’s almost always caught during a Level 2 camera inspection rather than a routine sweep.
Crown Repair
For masonry chimneys around Medina’s historic town square, the crown is the first place lake-effect moisture attacks. A cracked, spalled crown lets water into the smoke chamber, where it corrodes dampers and saturates mortar joints. A chimney crown repair in Medina runs $350-$680 on average, depending on whether we are tooling a simple crack or rebuilding the crown’s overhang. We use a breathable repair mortar that holds through Medina’s 40-50 inches of annual snowfall. If we can save the crown, we will tell you that. If it needs full replacement, we will show you the camera footage that proves it.
Crown Coating
A crown coating in Medina costs $190-$420 for a standard single-flue masonry chimney. We apply a flexible elastomeric sealant that moves with the freeze-thaw expansion instead of cracking against it. But we don’t coat a crown blind. If the underlying mortar is loose or the crown has structural cracks, a coating seals the surface and hides the problem. We only recommend a coating after we have documented the crown’s condition with photos and confirmed it is sound enough to hold the membrane. If it isn’t, we’ll tell you why a repair or rebuild is the honest fix.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Medina
We work with materials sourced from Copperfield, DuraFlex, and Olympia Chimney, procured through Haven’s buying network to keep customer prices honest. For Medina’s prefab-heavy housing stock, we keep stainless chase covers and multi-flue cap assemblies in local inventory so a cap replacement on a ranch off Weymouth Road doesn’t mean a three-week wait for parts. If your existing cap is a Famco or Gelco unit and it’s failed prematurely, we’ll document the failure. Sometimes it’s an installation defect. Sometimes it’s undersized for the flue. Either way, you’ll see the evidence before we recommend the replacement.
Common Chimney Cap & Crown Problems We See in Medina Homes
- Rusted sheet-metal chase covers on 1970s-90s prefabs. These were installed over wood-framed chases on most of Medina’s suburban ranch and split-level homes. When the thin cover rots through, water follows the chase framing down and rots the structure hidden behind vinyl siding. A cap inspection catches it before the framing goes soft.
- Freeze-thaw spalling on exterior brick crowns. Medina’s annual snow load plus repeated thaw cycles forces moisture into crown mortar joints. The joints spall, water enters, and the smoke chamber damper corrodes. Most homeowners don’t know until a Level 2 camera inspection shows the corrosion.
- Clay-tile flue liners cracking in historic homes near the square. The late-19th and early-20th century masonry chimneys around the Medina square were built with clay tiles. Decades of lake-effect moisture and wood-stove heat crack those tiles, allowing flue gases and creosote to bypass the liner and saturate adjacent mortar. A cracked tile liner under a masonry chimney usually requires a stainless reline, not a patch.
- Undersized or missing caps on multi-flue stacks. Many older Medina colonials have two or three flues sharing one chimney. When the cap is missing or fitted wrong, rain and snow enter the unused flues and create musty odors inside the house. A properly sized multi-flue cap stops that without restricting draft.
Pricing for Chimney Cap & Crown in Medina, OH
Here’s what you should expect to pay in Medina right now. A standard stainless cap installation runs $285-$410. A cap replacement on a prefab chase with a rusted cover runs $420-$680 depending on chase size and whether the flue liner has separated. Crown repair runs $350-$680. Crown coating runs $190-$420. A multi-flue cap for a historic masonry chimney near the square runs $500-$850, installed. The variables are flue diameter, chase condition, and whether we need to scaffold or work from a ladder. We give you a written price before work starts. Always. If you want a second opinion on any written quote you’ve received, bring it in. We’ll review it free. Call (980) 580-8641 and we’ll get you on the schedule.
We Also Serve Cities Near Medina
Our crews cover Medina and the surrounding metro. We regularly work in Chimney Cap & Crown in Medina neighborhoods, plus Brunswick, Wadsworth, Strongsville, and North Royalton. If you’re just outside the city line, call us at (980) 580-8641 and we’ll confirm availability for your street.
Serving Medina, OH - Our Local Coverage Area
We’re based in the Medina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Medina
Because most of Medina’s suburban housing stock from the 1970s through the early 1990s was built with factory prefabricated fireplace systems inside wood-framed chases, not site-built masonry chimneys. Those chases were capped with sheet-metal covers, not poured concrete crowns. The covers last 30 to 40 years at best. After that, they rust through and let water into the framing behind the vinyl siding. If you own a ranch or split-level in Medina built during that era, your chimney chase almost certainly has a sheet-metal cover and it almost certainly needs inspection if it hasn’t been replaced yet. Call (980) 580-8641 and we’ll check it with a camera before recommending anything.
Yes, in most cases. When a clay-tile liner in a historic Medina masonry chimney cracks, the repair is a stainless steel reline, not a demolition. We install a DuraFlex liner sized to the existing flue, which restores a continuous, insulated passage for flue gases without touching the original brick. The historic exterior stays intact. We’ve done this on multiple chimneys around the town square, and we document the existing cracks with camera footage before the reline goes in. Bring us a written quote from anyone else and we’ll give you a free second opinion on it. Call (980) 580-8641.
Once a year, before burning season. Medina gets 40-50 inches of snow annually, and the repeated freeze-thaw cycles are harder on crowns and caps than anything else we see. An annual inspection catches spalled crown mortar and rusted chase covers before winter moisture locks in the damage. The NFPA 211 standard recommends annual inspection for solid-fuel appliances, and that’s the minimum we’d suggest for any Medina home with a working fireplace. Call (980) 580-8641 to schedule yours.
On a prefab fireplace, the “cap” is the metal cover over the chase, and the “crown” is the top of the masonry chimney itself. On prefab systems, you don’t have a poured concrete crown; you have a sheet-metal chase cover. So when we talk about cap replacement on a 1980s ranch home in Medina, we’re replacing that rusted metal chase cover. Crown repair applies to true masonry chimneys, like the ones near the historic square. Different structures, different fixes. We’ll show you which one your home has and what it needs.
Because we won’t coat over spalling or replace a cap without showing you what’s underneath. A crown coating on structurally unsound mortar hides the failure. A cap replacement without checking the flue liner might fix the cover while the real problem, a separated liner or rotted chase framing, continues to leak. Clause 4 of the Haven Standard requires a documented photo record on every job. You get the images. Then you get a written price. If we can’t show you the damage, we won’t recommend the repair. Call (980) 580-8641 and we’ll schedule the inspection.
If you own a home in Medina and you’re wondering whether your cap or crown needs work, the answer starts with a camera-scan inspection. We’ll show you the evidence, write you a price, and stand behind it with the 365-Day Done Right Promise. Call (980) 580-8641 to book. Estimates are free, and you’ll have a written scope in your hands before anyone starts the work.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Medina and the surrounding metro under the Haven Standard.