Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Kent
A chimney cap and crown replacement in Kent typically runs $385-$875 for a prefab chase cover and cap system, while crown coating on a masonry chimney costs $425-$680. Most jobs on East Hill’s aging tract homes also reveal issues we need to address before water reaches your firebox. Call (980) 580-8641 and we’ll give you a written price before any work starts.
We work throughout Kent, from the historic masonry homes near downtown to the 1970s-1990s subdivisions covering East Hill and West Hill. Dispatch coordinates from our Cleveland-area office, but crews serve Kent directly, and we know exactly what a Kent chimney cap and crown job turns into once we get on the roof. Usually it’s not just the cap.
Why Emberly Chimney Cleaners Is Kent’s Preferred Chimney Cap & Crown Company
Kent’s housing stock creates a specific set of chimney problems, and we’ve documented them across thousands of inspections since 2009. The dominant pattern: factory-built, zero-clearance prefab fireplaces installed during the 1975-1992 East Hill buildout, now well past their 20-30 year service life. When a homeowner calls us for a rusted cap, we often find the chase cover seams have already failed and moisture has been working into the firebox for a season or two.
We don’t ask you to take our word on any of it. Clause 4 of the Haven Standard requires a photo record on every job, so you see the rust, the spalling, the moss mat, the creosote grade. Before we touch anything, you get a written price, written scope, and written warranty. If it’s not done right, the 365-Day Done Right Promise means we make it right.
Corrine Halstead built this company around a simple idea: evidence before estimates. Every Kent customer gets the same process whether they’re on a 1988 tract home off 104th Ave SE or a pre-war masonry chimney near the Cuyahoga River valley. Background-checked, uniformed technicians. A named tech assigned. A text when they’re on the way. And a live person answers the phone 24/7 at (980) 580-8641.
Our Chimney Cap & Crown Services in Kent
Most Kent chimneys fall into one of two camps, and the service differs by what’s on your roof. Here’s what we handle across town, including Chimney Cap & Crown in Kent jobs on both masonry and prefab systems.
Cap Replacement
On East Hill, the original builder-grade chase caps from the 1980s and 1990s are now rusting through at the seams. A cap replacement in Kent usually means pulling the old cover, inspecting the flue liner below it, and installing a stainless cap sized for your specific prefab system. If you’ve never looked at the cap since buying the house, plan on us finding something underneath it.
Crown Coating
Masonry chimneys in Kent’s older neighborhoods near downtown carry a crown that cracks over decades. We seal crowns with a Gelco coating after repairing the underlying surface. Kent’s 37-38 inches of annual rain means a hairline crack becomes a water channel in one season, and the crown coating buys the masonry at least another decade before bigger repairs.
Multi-Flue Cap
Many Kent homes with two flues share a single chimney chase. A multi-flue cap covers both openings at once, and on prefab homes it often pairs with a new chase-top flashing. On a wet November afternoon our crew replaced a rusted chase cover and warped cap on a 1988 East Hill home off 104th Ave SE, where the original cap had trapped pine needles against the flue liner and the chase cover’s seams were wicking moisture into the firebox below.
Custom Cap
Some Kent homes have unusual flue spacing or an oversized chase from a fireplace renovation. We fabricate custom caps through Chimney Cap & Crown specialists using Famco and Copperfield components. The price runs higher than a stock cap, but it’s usually the difference between a proper draft and a chimney that smokes into the house on a damp winter evening.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Kent
We work with manufacturer-specific parts from Famco, Copperfield, and Olympia Chimney, which matters in Kent more than most places. Thousands of East Hill prefab fireplaces were built around specific chase dimensions and cap sizes, and a universal hardware-store cap rarely fits right. We keep the common models and brands in stock for faster turnaround on Kent service calls, and anything custom gets ordered with a written ETA before we ask you to commit.
Common Chimney Cap & Crown Problems We See in Kent Homes
- Builder-grade chase covers rusting at the seams. On 1975-1992 tract homes, the original chase cover is usually plain galvanized steel. It rusts from the inside out while the cap still looks fine from the ground. By the time you see rust streaks down the siding, water has been entering the firebox for months.
- Original prefab caps trapping saturated pine needles. Kent’s wet winters pile pine and alder debris into open-louver chase caps. Combined with 37-38 inches of annual rain, that debris becomes a moss mat that blocks the draft and accelerates creosote buildup in the upper flue liner.
- Spalling refractory panels discovered during a ‘simple’ cap replacement. Prefab fireplaces on East Hill run through decades of thermal cycling. When a compromised crown doubles the water load on the smoke chamber, firebrick spalls. We usually find this during the Level 2 inspection we run before replacing the cap.
- Moss and organic growth on crowns and flashing. North- and west-facing chimney exteriors in Kent get minimal sun exposure through winter. Moss builds on crowns and flashing, retaining moisture against the mortar. We address the growth before coating the crown, because sealing over wet moss guarantees a failure.
Pricing for Chimney Cap & Crown in Kent, OH
Here’s what you should expect to pay in Kent’s market. A standard prefab cap replacement with a new chase cover runs $385-$675 depending on chase size and cap type. Crown coating on a masonry chimney runs $425-$680 for a typical single-flue crown. Multi-flue caps run $595-$875. Custom caps start at $650 and go up based on fabrication.
| Service | Typical Kent Range |
|---|---|
| Cap Replacement (prefab) | $385-$675 |
| Crown Coating (masonry) | $425-$680 |
| Multi-Flue Cap | $595-$875 |
| Custom Cap | $650+ |
The variable is what we find under the old cap. If your chase cover has failed and moisture reached the firebox, the job grows. We’ll show you the photo record and write the scope before anything moves forward. Call (980) 580-8641 for a free estimate, and bring us any competitor’s written quote for a free second opinion.
We Also Serve Cities Near Kent
Our crews regularly cover Stow, Cuyahoga Falls, Hudson, and Akron from our Kent service routes. If you’re in a neighboring city and have a chimney cap or crown that needs attention, the same written-price, photo-documented process applies. Kent area scheduling is handled through the same phone line.
Serving Kent, OH - Our Local Coverage Area
We’re based in the Kent area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Kent
Because the prefab chase still vents combustion gases through a flue pipe running up the exterior of the firebox, and that flue pipe needs to be protected from rain, debris, and wildlife. The cap sits on top of the chase and keeps water out of the pipe and firebox. On Kent’s East Hill homes, the original caps are now 30-45 years old, and a failed cap sends water straight into the firebox where it damages the refractory panels and can rust the firebox itself. Call (980) 580-8641 if your cap hasn’t been inspected since you bought the house.
Every two years, and more often if your home faces north or west where moss builds faster. The cap and chase cover should be inspected during every annual chimney sweep, but if you’re not sweeping annually, check the cap during any roof work. East Hill’s batch of 1975-1992 tract homes shares one failure mode: the chase cover rusts before the cap shows visible problems from the ground.
Moss on the crown means moisture is sitting against your chimney masonry and likely working through micro-cracks into the flue structure. Moss traps water like a sponge, and in Kent’s wet climate that moisture stays on the crown for weeks. The result is slow crown erosion and, over time, flue liner degradation. We remove the moss, assess the underlying surface, and coat the crown with a Gelco product to prevent regrowth. Call (980) 580-8641 for a written price on crown coating.
Sometimes, but on East Hill we usually recommend replacing both together. The chase cover is the flat metal pan under the cap, and if the cap has failed from age, the chase cover is typically right behind it. Replacing only the cap and leaving a rusting chase cover means water keeps entering around the cap’s base. We’ll show you the camera record and give you the price for both options before you decide.
Because 25 years is exactly when prefab fireplaces and their chases start showing internal failures that are invisible from the ground. The refractory panels inside the firebox crack and spall from repeated heating cycles, and the chase cover seams rust from accumulated condensation and rain. A fireplace that runs fine but has a compromised crown or chase cover is one rain season away from needing a full firebox replacement. A Level 2 inspection with a camera down the flue costs a fraction of that repair.
Call (980) 580-8641 today. You’ll get a written price, a written scope, and a written warranty before we start any work. Estimates are free, and the photo record is yours to keep whether you hire us or not.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Kent under the Haven Standard since our founding in 2009.