Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Keller
A chimney cap replacement or crown repair in Keller typically runs $350 to $1,400 depending on whether you have a prefab chase cover or a masonry crown, and most jobs are finished in a single visit. We’re the team Keller homeowners call when water starts staining the ceiling near the fireplace or when birds have turned the flue into a nest box. Emberly Chimney Cleaners has been documenting cap and crown work with camera scans and written prices since 2009, and we know exactly how these failures show up on the production homes that fill Keller’s master-planned neighborhoods. Call (980) 580-8641 and you’ll get a written price before anyone climbs on the roof.
Key Takeaways
- Keller homes built between 1990 and 2010 typically have siding-wrapped chases with metal chase covers, not traditional masonry crowns, which changes what “crown repair” actually means here.
- Most cap replacements in Keller run $350-$700 for single-flue caps and $600-$1,400 for multi-flue systems on larger homes.
- Every visit includes a camera-scan inspection and a documented photo record under Haven Standard Clause 4, so you see exactly what we see.
- Builder-installed galvanized chase covers in Keller rust out around the 15 to 20 year mark, and most original units are now past that point.
Why Emberly Chimney Cleaners Is Keller’s Preferred Chimney Cap & Crown Company
Keller homeowners don’t call us for a flashlight look. They call because we put a camera down the flue, photograph the cap and crown from the roofline, and hand over a written scope with a written price before any work starts. That’s what Haven Standard Clause 1 requires, and it’s how we’ve handled more than 38,000 chimney inspections and cleanings since 2009. In neighborhoods like Hidden Lakes, Marshall Ridge, and Bellaire Park, that documentation matters. Keller houses are not old masonry chimneys from the 1950s; they’re large production builds with prefab fireplace systems, and the failure points are different. Homeowners want proof of what’s actually wrong before approving a repair, and our photo record gives them exactly that.
Response time to Keller is straightforward. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Keller locally throughout the week. When you book a Chimney Cap & Crown inspection, you get a named technician, a background-checked uniformed crew, and a text when they’re on the way. That’s Haven Standard Clause 5 in practice. Corrine Halstead runs the operation and keeps the same standard on every Keller job: camera evidence, written pricing, written warranty, and a 365-Day Done Right Promise stamped on the work. If it’s not done right, we make it right.
BeforeAfterOur Chimney Cap & Crown Services in Keller
Cap Installation
New cap installation in Keller usually falls between $350 and $700 for a standard single-flue stainless unit. If you have a two-story home near Bear Creek Park with three flues serving a fireplace, furnace, and water heater, you’re looking at a multi-flue cap. We stock stainless caps from Famco and Copperfield, and we cut and fit them to the chase dimensions of your specific home rather than slapping on a universal part.
Cap Replacement
Most Keller cap replacements are driven by rust. The galvanized factory caps builders installed in the 1990s and early 2000s were never designed to last 25 years, and Keller’s alternating wet springs and hot summers accelerate the corrosion. We remove the old cap, photograph the flue terminations, and install a stainless replacement sized for your chase. The written quote you get before work starts includes the cap, fasteners, sealing, and a photo record of the finished install.
Crown Repair
In Keller, what looks like a crown repair is often a chase cover replacement. Homes here don’t have big cast concrete crowns over brick; they have metal chase covers over wood-framed chases wrapped in siding or stone veneer. When those covers rust through after 15 to 20 years, water drips straight down into the firebox and flue liner of every appliance connected to that chase. We build and install 24-gauge stainless chase covers, properly sloped and sealed, and we photograph the condition of the chase interior before closing it up.
Crown Coating
For the minority of Keller homes with actual masonry accents, particularly larger custom builds near the Timarron development, crown coating buys real time. A flexible elastomeric crown coat seals hairline cracks that form from thermal cycling between Keller’s warm afternoons and occasional hard freezes. Expect to pay $400 to $800 for a crown coating on a standard masonry crown, including surface prep and the camera scan. It’s not a permanent fix for structural crown failure, but it stops water intrusion when the crown is otherwise sound.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
The prefab fireplaces in Keller homes carry brand names like Heatilator, Heat & Glo, and Majestic, and the caps and chase covers above them need to match the specific unit underneath. We keep Famco and Copperfield caps in regular stock for Keller jobs, along with 24-gauge stainless sheet for custom chase covers built to the dimensions of your chase. DuraFlex liner components are on hand when a rusted cap has already let enough water in to damage the flue liner itself. Parts availability matters here because so many Keller homes were built in the same 15-year window, so we know which cap configurations the production builders used. Corrine Halstead demands that every Keller job gets a written price for parts and labor before we start, not a surprise invoice after the fact.
Common Chimney Cap & Crown Problems We See in Keller Homes
- Rusted chase covers on siding-wrapped chases. Keller’s original builder-installed galvanized covers are now 20 to 30 years old in most homes, and many have rusted through at the flue collar seams. Water follows the flue pipe down into the firebox and can damage refractory panels in the prefab unit below.
- Bird nests in unused fireplace caps. Keller’s mild winters mean fireplaces often sit idle for years, and starlings and sparrows find the gap under a loose cap. We’ve pulled complete nests and a decade of debris from caps on homes where the fireplace had been lit fewer than five times since construction.
- Backdrafting multi-flue caps on windy days. Original caps on production homes sometimes pull exhaust from one flue back down another when wind shifts across the roof. That pushes gas water heater exhaust into the chase and can set off carbon monoxide detectors. A properly designed multi-flue cap fixes the pressure differential.
- Cracked crown coating on masonry accents. Larger Keller homes with stone or brick chimney accents near pool features show crown cracking from thermal cycling. Once water gets into the smoke chamber, you’re looking at finer and more expensive repairs than a recoat would have cost.
Pricing for Chimney Cap & Crown in Keller, TX
Here’s what Keller homeowners can expect to pay as of early 2026. A single-flue stainless cap install runs $350 to $700. A multi-flue cap for the typical three-flue Keller chase runs $600 to $1,200 installed. Custom stainless chase covers built on site run $800 to $1,400 depending on chase dimensions and whether we’re also sealing flue terminations. Crown coating on a masonry crown runs $400 to $800. What moves the price on your home is the chase size, the number of flues, and whether the old cap has been leaking long enough to require liner inspection or repair inside the flue. Your written quote covers all of it before any work starts, and if you have a competitor’s written estimate, we’ll give you a free second opinion. Call (980) 580-8641 for an exact number on your Keller home.
How Keller’s 1990s-2000s Housing Boom Shapes Cap and Crown Work
Keller’s residential buildout was concentrated almost entirely in the 1990s through mid-2000s suburban boom, filling master-planned communities with large, upscale production homes that feature builder-installed prefabricated fireplaces, not true masonry chimneys. Those units are now 20 to 30 years old and approaching or exceeding their rated service life. For cap and crown work, that means one thing: we’re not repointing brick or pouring new concrete crowns the way we would on an older Fort Worth home. We’re replacing rusted chase covers, rebuilding siding-wrapped chases, and installing multi-flue stainless caps sized for three-appliance flue systems. Keller’s climate compounds it. The area averages only a handful of hard-freeze days a year, so fireplaces get used once or twice a season, if that. When Winter Storm Uri hit in February 2021, homeowners fired up units that had sat idle for two or three years, and the resulting inspection calls routinely uncovered bird nests, cracked refractory panels, and corroded caps on houses that looked nearly new from the street.
In the Hidden Lakes subdivision, our techs responded to a cap-and-crown inspection on a two-story brick-and-stone home with three flues serving a Heatilator gas-log fireplace, a gas furnace, and a water heater. The galvanized factory cap had rusted through, and the chase cover was caulked with deteriorating silicone. We installed a custom multi-flue stainless cap with a 24-gauge chase cover, sealed the flue terminations, and verified draft on the water heater. The homeowner had lit the fireplace only twice since 2004, and the furnace flue showed minor rust staining from a prior storm. That’s the Keller profile: a beautiful house with a fireplace system that has quietly aged out.
We Also Serve Cities Near Keller
Emberly Chimney Cleaners handles cap and crown work throughout the northeast Tarrant County area, including North Richland Hills, Southlake, Haltom City, and Colleyville. If you’re in a Keller-adjacent neighborhood and need the same camera-documented inspection and written pricing, call (980) 580-8641 and we’ll schedule you for the next available visit.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Keller
Keller’s production homes typically run three flues through a single chase: one for the fireplace, one for the furnace, and one for the water heater. A multi-flue cap covers the entire chase opening and equalizes pressure across all three terminations, which prevents backdrafting when wind shifts across the roof. Individual caps on each flue leave gaps and don’t solve the pressure differential problem. If your Keller home still has the original builder cap, it’s worth a camera-scan inspection to see whether it’s time for a replacement. Call (980) 580-8641 for a written quote.
Uri exposed deferred maintenance across Keller. Fireplaces that had sat unused for years were lit for the first time since construction, and the heat cycling through prefab units with corroded caps or cracked chase covers made existing water damage worse. The storm pushed many Keller homeowners to finally inspect their chimney systems, and what we found was consistent: rusted caps, bird nests, and damaged refractory panels from years of water intrusion. The good news is that cap and chase cover replacement stops the water at the source. We include a full camera scan and photo record on every visit so you can see the condition before deciding on repairs. Call (980) 580-8641 to schedule an inspection.
Yes, on the masonry crowns that actually exist in Keller, typically on custom homes or stone-accented chases near Timarron or along Bear Creek, a crown coating can add 5 to 10 years to a crown that has hairline cracking but no structural failure. The coating is an elastomeric sealant that flexes with Keller’s thermal cycling instead of cracking like rigid mortar. It stops water from seeping into the smoke chamber and buying you time before a full crown rebuild becomes necessary. Expect to pay $400 to $800 depending on crown size and access. Call (980) 580-8641 and we’ll give you a written price based on what our camera shows.
Birds don’t care whether you use the fireplace. A loose or rusted cap with a gap around the flue is a sheltered nesting site, and Keller’s mild climate keeps starlings and sparrows around year-round. Homes where the fireplace gets lit once a year or less are prime targets because there’s no heat or smoke to deter nesting. We routinely remove nests that have been accumulating for years, and in some cases the nesting material has blocked the flue enough to create a carbon monoxide risk if the fireplace or furnace ever does get used. A properly fitted stainless cap with proper screening ends the problem. Call (980) 580-8641 to have your cap inspected.
Usually yes, and the timing lines up because both were installed at the same time. Keller homes built between 1990 and 2010 are hitting the age where the original galvanized caps and chase covers have rusted through, and the prefab fireplace units below them have also aged out of their rated service life. Replacing the cap without addressing the fireplace unit means water and draft problems continue, and replacing the fireplace without fixing the cap means the new unit gets damaged by the same water intrusion. We inspect both together and give you a written scope that covers the entire chase system. Call (980) 580-8641 for an inspection that shows you exactly what needs work and what can safely wait.
Get Your Keller Chimney Cap & Crown Inspected
If water has been staining the ceiling near your fireplace or you have not had the cap and chase cover looked at since buying your Keller home, start with a camera inspection. We document everything, hand you a written price before any work starts, and back the finished job with the 365-Day Done Right Promise. Corrine Halstead and the Emberly Chimney Cleaners team answer calls live at (980) 580-8641. Call today and get a real number for your Keller chimney, not a guess.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Keller under the Haven Standard since 2009.
Chimney Cap & Crown in Nearby Areas
