Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Hudson
Chimney cap and crown work in Hudson, OH typically runs $425-$1,950 depending on whether you need a standard stainless cap, a custom multi-flue cap sized to historic brick, or a full crown rebuild with coating. Most Hudson jobs are done in one visit, and every quote is written before any work starts. If you own a home near the historic green, off Aurora Street, or in one of the 1920s-1950s Colonials around Stow Road, call (980) 580-8641 and we’ll schedule a camera-scan inspection with a written price in hand before you decide anything.
Emberly Chimney Cleaners has inspected over 38,000 chimneys since 2009, and Hudson’s housing stock is unlike anything else in Summit County. The freeze-thaw damage from lake-effect snow, the Historic District Commission’s material requirements, and the sheer number of multi-flue masonry chimneys on oversized lots mean cap and crown work here isn’t a generic swap. It’s compliance work, custom fabrication, and freeze-cycle repair done in a specific order. Our crews know what the Commission asks for before we quote it, so you’re not surprised mid-project.
Why Emberly Chimney Cleaners Is Hudson’s Preferred Chimney Cap & Crown Company
Hudson homeowners call us because we hand them a camera record of what the flue actually looks like, not a flashlight verdict. Every visit includes an NFPA 211 Level 2 camera-scan inspection and a photo report you keep. That’s Clause 4 of the Haven Standard, and we’ve done it on every job since 2009. When a crown is spalled or a multi-flue cap is rusted through, we show you the photos, name the material we’d use, and hand you a written price, written scope, and written warranty before we touch a brick.
The Hudson homes we service sit on oversized lots, and most have two or three flues in a single masonry chimney. That changes the inspection. We’re not looking at one flue and calling it done. We camera-scan each flue, check the shared crown, and measure the cap footprint against the original brick dimensions. On Aurora Street, that’s the difference between a cap that fits and one the Historic District Commission sends back.
Corrine Halstead, who leads our crew scheduling for Hudson, keeps dispatch tight to Summit County. You’ll know your assigned technician by name before they arrive, and you’ll get a text when they’re on the way. Calls are answered by a live person, 24/7. No voicemail queue, no web form purgatory. You call, a person picks up, and a uniformed, background-checked tech shows up with the right cap and mortar on the truck.
Hudson work also carries our 365-Day Done Right Promise. If it’s not done right, we make it right. That’s stamped on every job, and it’s not contingent on you catching the mistake. We document the finished crown and cap with photos, and if water gets through a crown we rebuilt within a year, we’re back to fix it.
Our Chimney Cap & Crown Services in Hudson
Most Hudson homes need more than a standard cap. Here’s what we actually do in this market, from the most common to the most involved. A quick note on our Chimney Cap & Crown work overall: we quote it in writing, we source materials through Haven’s buying network to keep prices honest, and we never start without your signature on a scope.
Cap Installation
A standard single-flue stainless cap in Hudson runs $425-$680 installed, depending on flue size and roof access. If you have a 1940s or 1950s Colonial with a single flue and a straightforward roof pitch, this is usually a one-visit job. We stock Famco and Olympia Chimney caps on our trucks, sized to the existing flue tile, and we seal the base with a mechanical draw band, not caulk.
Cap Replacement
Replacement ranges $480-$850 for single-flue and $900-$1,950 for multi-flue or custom sizes around Hudson. The spread comes from what we find underneath: rusted draw bands, cracked flue tiles, or a crown that’s lost its slope. If the cap failed because the crown underneath it is spalled, replacing only the cap buys you a year at best. We’ll tell you that plainly and put both in the written scope, not spring it after the ladder is up.
Crown Repair
Crown repair in Hudson runs $650-$1,400 for a standard Colonial chimney and $1,200-$2,200 for the tall Federal-style chimneys near the historic district. Hudson’s freeze-thaw cycle is brutal on crowns. Water sits in the cracks, freezes, expands, and spalls the concrete before it even reaches the flue. We rebuild the crown with the correct slope and overhang, use period-consistent mortar where the Historic District Commission requires it, and coat it with Gelco to stop water intrusion before any liner work. This is preventive, not cosmetic.
Crown Coating
A crown coating job on a Hudson chimney runs $425-$700 when the underlying crown is structurally sound. We use Gelco, a flexible elastomeric coating that moves with the brick through freeze-thaw cycles instead of cracking against it. If the crown has already spalled, coating alone won’t hold. We’ll show you the photos, explain the difference, and quote you the rebuild if it’s needed. If it can safely wait, we’ll say that too.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Hudson
We install and service caps and crowns from Famco, Olympia Chimney, and Copperfield on Hudson homes. We stock common single-flue and multi-flue sizes locally, so a standard replacement doesn’t wait on a warehouse shipment. For custom caps on 1820s-1860s chimneys near the green, we order through Haven’s buying network to keep the price honest and the lead time short. DuraFlex and HeatShield components come into play when a crown failure has already damaged the flue liner underneath, and we’ll spec those if your camera-scan shows it.
Common Chimney Cap & Crown Problems We See in Hudson Homes
- Freeze-thaw crown cracks on multi-flue chimneys. Hudson sits squarely in the Lake Erie snow belt, and the repeated freeze-thaw action is the dominant deterioration mechanism here. Water infiltrates cracked crowns, freezes, expands, and progressively spalls brick face across the whole chimney.
- Rusted or missing multi-flue caps on oversized lots. Homes with two or three fireplaces often have one wide masonry chimney with several flues. A rusted multi-flue cap lets rain, leaves, and animals into unused flues, which is exactly what we found on Aurora Street before the Commission signed off on a replacement.
- Unlined brick flues hiding crown damage in pre-Civil War homes. Hudson’s oldest homes near the green commonly have open, unlined brick flues. When the crown fails on those, water runs straight down into the smoke chamber and accelerates spalling inside tall Federal-style chimneys.
- Animal nests and blocked draft in unused flues. Historic District Commission reviews can delay cap replacements on street-visible chimneys, leaving damaged caps in place long enough for squirrels and birds to nest and block draft in flues you never use. A camera-scan shows it in five minutes.
Pricing for Chimney Cap & Crown in Hudson, OH
Here’s what Hudson homeowners can expect to pay, in writing, before we start. Standard single-flue cap installation: $425-$680. Multi-flue or custom cap: $900-$1,950. Crown repair with Gelco coating: $650-$2,200 depending on chimney height and historic material requirements. Crown coating alone (sound crown): $425-$700. If your home is in the Historic District and the chimney is visible from the street, add 2-4 weeks for Commission review and material-matched fabrication. That’s not our fee. It’s the town’s process, and we handle the paperwork so you don’t sit in a meeting about mortar ratios.
We never charge for a “flashlight look” and call it an inspection. The camera-scan, the photo record, and the written quote are all included on every visit. You walk away with documentation whether you hire us or not. Call (980) 580-8641 and we’ll put a number on your specific chimney, in writing, before any work is scheduled.
We Also Serve Cities Near Hudson
Our crews serve Hudson daily, and we take the same camera-scan inspection and written-price standard to Stow, Cuyahoga Falls, Kent, and Solon. If you’re in a neighboring Summit County city with a mid-century Colonial or a multi-flue masonry chimney, Chimney Cap & Crown in Hudson standards apply: photo record, written scope, written warranty. Dispatch is coordinated from our Cleveland office, with crews serving Hudson locally.
Serving Hudson, OH - Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Hudson
Because the flue dimensions on 1820s-1860s Western Reserve Federal and Greek Revival homes don’t match modern standard cap sizes, and the Historic District Commission will reject a visible material mismatch. A custom cap costs $900-$1,950 in Hudson, is fabricated to your original brick dimensions, and meets the Commission’s material-match requirement. Call (980) 580-8641 and we’ll measure, document, and quote it in writing.
Yes, if the chimney is not visible from the street. Interior work on a crown or cap is not reviewable. If the chimney faces the road, any exterior alteration triggers review, and we handle the submission, the material spec, and the follow-up photos. The repair itself runs $650-$2,200 in Hudson. We’ll tell you in the first phone call whether Commission review applies to your specific house.
Freeze-thaw cycles crack the crown underneath the cap, which loosens the cap’s mounting, lets water into the flue tiles, and rusts the draw band from the inside. On multi-flue chimneys serving two or three fireplaces, this happens faster because the wider crown has more surface area to crack. A written quote with a camera-scan photo record costs you nothing. Call (980) 580-8641.
Usually yes. Each flue should have its own cap, but Hudson Colonials with multiple flues in one masonry chimney often benefit from a single custom multi-flue cap sized to the full footprint. It’s cleaner, it seals better against lake-effect weather, and it costs $900-$1,950 installed. We’ll show you both options in the written quote, with photos of your actual flue configuration.
Water enters through the cracked crown, saturates the brick, and freezes. When water freezes inside brick, it expands and pops the face off the brick, which is spalling. On Hudson’s unlined pre-Civil War chimneys, this damage travels fast because there’s no liner to catch the water. Crown repair with Geco coating stops the water at the top. Call (980) 580-8641 and we’ll put it in writing with photos before you spend anything.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Hudson under the Haven Standard since 2009.