Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Franklin
A chimney cap and crown in Franklin, TN typically costs $385-$950 for a standard replacement, with multi-flue caps and custom work running $1,100-$2,400 depending on crown condition and flue count. Most jobs are completed in a single visit, usually 2-4 hours, and we schedule Franklin appointments within 5-7 business days during spring and summer. That’s the short answer. The longer answer involves what we actually find when the camera goes down the flue in a Franklin home, because this town has a housing stock problem most homeowners don’t know they have.
Emberly Chimney Cleaners serves Franklin with camera-scan inspections on every visit, written pricing before any work starts, and a documented photo record when we’re done. Call (980) 580-8641 to book.
Why Emberly Chimney Cleaners Is Franklin’s Preferred Chimney Cap & Crown Company
Franklin homeowners tend to be sharp buyers. A lot of them relocated here for Nissan or the healthcare corridor, got a 3,400-square-foot house in a planned community, and never thought twice about the fireplace until something leaked or smelled wrong. We get it. Corrine Halstead built Emberly Chimney Cleaners around a simple standard: show the proof, name the price, put it in writing. Clause 4 of the Haven Standard has required a photo record on every job since 2009, long before inspectors or insurance companies thought to ask for one.
Our Chimney Cap & Crown team has worked on everything from 1840s masonry stacks near the Franklin square to 2006 prefab units in Ladd Park. The common thread is the same: we document what’s actually wrong, explain it in plain language, and charge a written price you approve before anything gets touched. If a competitor has quoted you something, bring it. We offer a free second opinion on any written estimate, and we’ll show you the photos to back up what we recommend. Franklin customers rate us well because the evidence does the talking: degrees of creosote, liner condition, crown cracking, rust at the rivet points. Named and documented, not waved at.
Live phone support runs 24/7 at (980) 580-8641. A real person answers. Not a voicemail tree.
Our Chimney Cap & Crown Services in Franklin
Cap Installation
A new single-flue cap in Franklin runs $385-$520 installed, including the part and the roof access. Most of the units we install are stainless steel from Olympia Chimney or Famco, because galvanized caps rust through at the rivets within 12-15 years in Middle Tennessee humidity. We see it constantly on 2000s-era builds in Westhaven and Ladd Park.
Cap Replacement
Replacement pricing in Franklin sits between $450-$950 for standard flues, more when the cap is oversized or custom. The real cost driver isn’t the cap; it’s what we find underneath it. A rusted round cap on a Superior zero-clearance unit often means the chase cover and crown have been taking water for years. We won’t replace a cap without checking what it was protecting. Franklin’s newer subdivisions are dense with these units, and most have never had a Level 2 inspection.
Crown Repair
The chimney crown is the concrete slab at the top of a masonry chimney that sheds water away from the flue. When freeze-thaw cycles in Franklin’s winters crack it, water gets behind brick and into attic flue spaces. Crown repair typically runs $450-$850, and we use Gelco crown coat for resurfacing because it flexes enough to survive the freeze-thaw cycle without re-cracking. In the historic district near downtown Franklin, we see crowns on 100-year-old chimneys that were never poured correctly in the first place. Old clay tile liners deteriorate right along with them.
Crown Coating
A Gelco crown coat application in Franklin runs $350-$650 and buys 10-15 years of water protection for a crown that hasn’t structurally failed yet. It’s the specific fix for hairline cracking before it widens. We recommend it more often in Franklin than in drier markets because the humidity here means even small crown cracks pull moisture into the masonry year-round.
Multi-Flue Cap
Multi-flue caps are a Franklin specialty because so many of the larger planned-community homes have two or three hearth systems sharing a single chimney structure. Pricing lands between $950-$1,800 depending on flue count and crown footprint. These aren’t off-the-shelf parts; they’re measured, fabricated to fit, and installed so that each flue vents to its own opening. Get one wrong in a shared stack and a neighbor’s gas-log insert can vent into your flue. In attached or closely built communities, that’s a carbon monoxide risk, not a nuisance.
Custom Cap
Custom caps in Franklin run $1,200-$2,400. They’re for odd flue configurations, multi-flue layouts, oversized historic flues, and homeowners who want something that doesn’t rust out on a 10-year cycle. We fabricate from stainless and specify the mesh size to keep out Franklin’s most persistent chimney squatters: chimney swifts in spring and squirrels in fall. A custom cap is a one-time purchase if it’s built right. We build them to be the last cap the chimney gets.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Franklin
We stock and install Olympia Chimney, Famco, Gelco, and Copperfield products for Franklin customers. These are the same materials we trust on every job, sourced through our buying network specifically to keep pricing honest. Gelco crown coat is our go-to for crown sealing in freeze-thaw country; Olympia Chimney caps are the standard stainless replacement for rusted galvanized originals. When a Franklin homeowner calls on a Wednesday, we’d rather have the part on the truck than order it. Our techs carry the common cap sizes and crown materials for the firebox brands most common in Franklin, which means fewer second trips and a faster resolution for you.
Common Chimney Cap & Crown Problems We See in Franklin Homes
- Rusted contractor-grade caps on 2000s-era prefab units. Builders in Franklin’s planned communities installed galvanized caps that the region’s humidity eats through at the rivet points in 12-15 years. By the time the homeowner notices, the flue liner is often wet and the firebox is near its service limit.
- Cracked crowns on historic masonry chimneys. Franklin’s downtown and Victorian district homes have unreinforced masonry crowns that predate modern construction standards. Freeze-thaw cycling through Tennessee winters spalls the concrete and opens paths for water into the attic flue space.
- Missing or undersized multi-flue caps on shared stacks. In denser planned communities where homes sit close or share chimney structures, a missing cap lets one unit’s exhaust enter another’s flue. This is a code and safety issue, not just a water leak.
- Prefab fireplaces aging past their manufacturer-rated 20-30 year service life. Thousands of Franklin homes built between 1995 and 2015 in communities like Westhaven and Ladd Park have Heatilator- and Superior-style units now crossing that line. The cap and crown are almost always the first point of failure, which makes them the early warning system for a firebox that needs replacement.
Pricing for Chimney Cap & Crown in Franklin, TN
We Also Serve Cities Near Franklin
Our Chimney Cap & Crown in Franklin coverage extends throughout the surrounding area. We regularly serve homeowners in Brentwood, Spring Hill, Nashville, and La Vergne with the same written pricing and photo documentation standard. If you’re in one of these communities, call (980) 580-8641 and we’ll schedule a visit.
Serving Franklin, TN - Our Local Coverage Area
We’re based in the Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Franklin
If your Franklin home was built between 1995 and 2015 and still has the original cap, it’s overdue. Look for rust at the rivet points, discoloration on the ceiling near the fireplace, or a damp smell in the firebox after rain. Those are the telltale signs. A camera inspection confirms it in under an hour, and we’ll hand you the photo record when we’re done. Call (980) 580-8641 for a free estimate.
Yes. In attached or closely built units that share a chimney structure, a missing or wrongly sized multi-flue cap lets one unit’s combustion gases cross into the adjacent flue. That’s how carbon monoxide ends up where it shouldn’t be. It’s most common in Westhaven and Ladd Park, where 2000s-era construction packed multiple fireplaces into shared stacks. If you share a chimney, this is worth checking. Call (980) 580-8641 and we’ll inspect the cap and crown routing for your flue specifically.
The antebellum and Victorian chimneys near downtown Franklin were built before modern crown standards existed. Most have unreinforced mortar crowns, not properly poured concrete with a drip edge. Freeze-thaw cycling cracks them, and Middle Tennessee humidity pulls moisture into the masonry all year. Newer homes have their own problems, but historic Franklin chimneys crack younger because they were poured wrong to begin with. A Gelco crown coat is the fix we recommend most often there.
No. This is the most common assumption we encounter in Franklin, and it’s wrong. Gas fireplaces still vent through the same cap and crown as wood-burning units. A rusted cap lets rain and birds into the flue, and a cracked crown lets water behind the siding. Gas systems also produce acidic condensate that corrodes caps faster than wood exhaust in some configurations. Annual inspection applies to gas too. We’ll show you the camera footage before recommending anything.
A missing multi-flue cap lets rain, animals, and debris into every flue opening at once. In Franklin’s 2000s-era planned communities, it also creates cross-venting between flues, which means a neighbor’s gas-log exhaust can enter your flue space. Fix it immediately. This is the firestop and water-intrusion repair no one knows to inspect. Call (980) 580-8641 and we’ll measure, fabricate, and install the correct multi-flue cap in a single visit.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Franklin and Middle Tennessee.
Call (980) 580-8641 for a free estimate on chimney cap and crown work in Franklin. We answer live, 24/7.