Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Farmers Branch
A chimney cap and crown job in Farmers Branch typically runs $425-$1,150 for most ranch homes, depending on whether you need a simple cap replacement or a full crown rebuild with coating. We’re out to Farmers Branch regularly, and we know the houses we’re working on before we step out of the truck: 1950s and 1960s brick ranches, original clay tile flues, and crowns that haven’t been touched since the day they were poured.
If your chimney cap is missing, rusted out, or you’ve noticed cracks in the crown after the last freeze, call (980) 580-8641. We’ll schedule a visit, put a camera down the flue, and show you exactly what needs work before you spend a dollar.
Why Emberly Chimney Cleaners Is Farmers Branch’s Preferred Chimney Cap & Crown Company
The work in Farmers Branch is different from what we see ten miles west. These homes were built before modern chimney codes, and the original caps and crowns are almost always builder-grade. That means thin mortar, undersized rain covers, and a flue that was never designed for the way we use fireplaces today. We’ve spent years looking at these exact structures, and we know what fails first.
Corrine Halstead, who leads our team, set the practice standard we work under back in 2009: a NFPA 211 Level 2 camera inspection goes down the flue on every visit, not just when something looks wrong. That means when we tell a Farmers Branch homeowner their crown is cracked, they’re looking at the photos with us, not taking our word for it. It’s Clause 4 of the Haven Standard, and we’ve done it on every one of our 38,000+ inspections and cleanings since.
We serve Farmers Branch homes from our Dallas-Fort Worth metro office, and our technicians are background-checked, uniformed, and assigned by name before the visit. You’ll get a text when they’re on the way.
Our Chimney Cap & Crown Services in Farmers Branch
Cap Installation
Most Farmers Branch ranch homes either never had a chimney cap or still have the original from the 1960s with legs corroded through. We install new caps sized to the flue, with proper screening to keep birds and debris out. A standard single-flue cap install in Farmers Branch runs $225-$450 including the cap and labor.
Cap Replacement
When the old cap is rusted, bent, or missing its spark screen, we remove it and set a new one. We source caps from Famco, Olympia Chimney, and Copperfield so you’re not paying for a generic box-store part marked up. Replacement in Farmers Branch typically runs $275-$525 depending on flue size and whether the old cap needs cutting off.
Crown Repair
Crowns on Farmers Branch chimneys crack along mortar joints as the black clay underneath heaves and settles. We grind out failed joints, repoint with Gelco mortar, and rebuild the crown slope so water sheds away from the flue. A typical crown repair on a single-flue ranch chimney runs $450-$850. This is the job we recommend most often here, because a cracked crown is the entry point for every other chimney problem.
Crown Coating
After repair, we apply a flexible crown coating that bridges hairline cracks and moves with the house through wet winters and dry summers. For Farmers Branch houses on expansive soil, this is the difference between a crown that lasts five years and one that lasts twenty. Coating alone runs $350-$600 on a standard ranch chimney.
Multi-Flue Cap
Many Farmers Branch homes vent both the fireplace and the furnace or water heater through the same masonry stack. A multi-flue cap covers both openings under one lid, with separate screens. We set these frequently on 1960s ranches where the original installer never bothered. Multi-flue cap supply and install runs $550-$1,150 depending on the stack dimensions.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Farmers Branch
We keep Famco, Gelco, Olympia Chimney, and Copperfield parts in stock and sized for the flues we actually see in Farmers Branch. That means we’re not ordering a cap after we quote you and making you wait a week. When a crown needs to be rebuilt, we use Gelco mortar formulated for freeze-thaw cycling, which matters on a North Texas ranch that sits through sudden Arctic fronts. Our Chimney Cap & Crown team carries what most Farmers Branch jobs need on the truck.
Common Chimney Cap & Crown Problems We See in Farmers Branch Homes
- Crowns cracked by expansive clay heave. The black clay under Farmers Branch swells in wet winters and shrinks in summer drought, and that movement telegraphs straight up through the brick. Crowns crack along mortar joints, water gets in, and the clay tile flue liner starts spalling from the top down.
- Rusted original builder caps from the 1960s. We’re regularly looking at caps that have been up there since LBJ was president. Legs rotted through, screens gone, and birds nesting in the flue. The cap looks fine from the ground. It’s not.
- Freeze-thaw widening hairline cracks into separations. A hairline crack from last summer’s drought becomes a full separation after one hard freeze. Farmers Branch homeowners often don’t notice until they see water staining on the ceiling below, by which point the crown, the flue, and the chase are all involved.
- Flue liners spalling at the crown line. On 50-to-70-year-old Farmers Branch chimneys, the original clay tile liner is often crumbling right where it meets the crown. Moisture sits there. Freeze-thaw does the rest. You won’t see this from the ground.
Pricing for Chimney Cap & Crown in Farmers Branch, TX
- Cap installation: $225-$450
- Cap replacement: $275-$525
- Crown repair: $450-$850
- Crown coating: $350-$600
- Multi-flue cap: $550-$1,150
These ranges cover the vast majority of Farmers Branch ranch homes. What moves the number is flue size, crown condition, and whether the existing cap needs to be cut off rather than unbolted. Every quote is written before work starts, with the scope spelled out and the warranty in the same document. That’s Clause 1 of the Haven Standard: H.A.V.E.N. means “Have it in writing.” We never ask you to call for a quote, because the quote is the point. Call (980) 580-8641 for a free estimate on your specific chimney.
We Also Serve Cities Near Farmers Branch
Beyond Farmers Branch, our crews provide chimney cap and crown work in Dallas, Austin, Houston, and San Antonio. If you own a home in one of those cities with the same aging ranch chimney profile, the same camera-scan inspection standard and written pricing apply.
Serving Farmers Branch, TX - Our Local Coverage Area
We’re based in the Farmers Branch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Farmers Branch
Farmers Branch sits on expansive black clay that heaves and shrinks with seasonal moisture changes, and that movement transmits directly into the masonry chimney stack. A crown on a 1960s ranch in Farmers Branch is being flexed every year by the soil beneath the foundation, while a house a few miles west on the limestone bedrock of Coppell doesn’t see anything close to that movement. The crown cracks first because it’s the thinnest, most exposed part of the chimney. Call (980) 580-8641 and we’ll show you the crack pattern on camera.
Yes, in many cases. If the clay tile liner is still intact and we confirm that with a Level 2 camera scan, we can set a new cap and leave the liner alone. Last month we were on Valley View Lane at a 1964 brick ranch, and the original clay liner was spalling at the crown line. We showed the homeowner the camera footage, rebuilt the crown with Gelco mortar, and set a new multi-flue Famco cap over both flues. No liner replacement, no upsell, because the camera said the liner below the crown line was still sound. The camera is what makes that call, not a sales target.
It puts one lid over both flues with separate screens, so the fireplace flue and the furnace flue are both protected from rain, birds, and debris without blocking either one. On older Farmers Branch ranches this is extremely common because the furnace or water heater was vented into the masonry stack decades after the fireplace was built. The original cap, if there was one, usually only covered the fireplace flue. We size the multi-flue cap to the full stack width and set it so both flues draft properly. Call (980) 580-8641 for a quote based on your stack dimensions.
We recommend re-coating every 7 to 10 years on a Farmers Branch crown that sits on expansive clay, because the freeze-thaw and heave cycles will re-open hairline cracks eventually no matter how good the first coating was. The coating is a flexible membrane that moves with the masonry, but it does have a service life. If you’re not sure when yours was last done, the camera scan will tell us. We’ll give you a written recommendation with a date you can put in your phone for the next coating, not a “call us when it fails” note.
A cracked crown itself doesn’t start chimney fires. What it does is let water into the flue, which accelerates spalling in the clay tile liner. Once the liner starts breaking apart, creosote can build up in the gaps and a chimney fire becomes possible. It also lets water run down inside the smoke chamber and firebox, which leads to masonry failure far more expensive than a crown repair. If you have a cracked crown, fix it before the liner goes. Call (980) 580-8641 and we’ll show you the current condition on camera before recommending anything.
Get Your Farmers Branch Chimney Cap & Crown Inspected Today
If your cap is rusted, your crown has visible cracks, or you just bought a 1960s ranch in Farmers Branch and want to know what you’re working with, call (980) 580-8641. We’ll schedule a visit, run the camera, and hand you a written price for any work needed. The estimate is free. The photos are yours to keep. And if you’ve got a written quote from another company, bring it in: we’ll give you a free second opinion on it.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Farmers Branch and the surrounding Dallas-Fort Worth metro area since 2009.
Chimney Cap & Crown in Nearby Areas
