Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Brookhaven
A chimney cap and crown replacement in Brookhaven typically runs $425-$1,850, depending on whether you need a standard single-flue cap or a custom multi-flue system sized for one of Historic Brookhaven’s original estate chimneys. Most Brookhaven jobs are completed in a single visit, and a written price is delivered before any work starts. If you live in Ashford Park, Drew Valley, or along Peachtree Road, call (980) 580-8641 and we’ll schedule a camera-scan inspection first, so you know exactly what’s failing before you spend a dollar.
Brookhaven is not a generic Atlanta suburb. The housing stock here runs from 1920s brick estates to 1960s ranches to post-2000 townhomes, and the chimney problems follow the architecture. Our Chimney Cap & Crown team works in Brookhaven every week, and we know what a shared masonry stack on Club Drive looks like compared to a standalone ranch flue off Ashford Dunwoody Road. That local knowledge changes what we recommend and what we quote.
Why Emberly Chimney Cleaners Is Brookhaven’s Preferred Chimney Cap & Crown Company
We’ve inspected and cleaned more than 38,000 chimneys since 2009, and every single one included a written price before work started and a documented photo record when the job was done. That’s not a slogan. It’s Clause 4 of the Haven Standard, and it means you walk away with camera footage of your flue, not a technician’s verbal summary. Brookhaven homeowners reading this page are the kind of people who want the evidence, and we’re the company that built our name on handing it to them.
Corrine Halstead leads our team, and the standard she set from the beginning was simple: say what you found, name the price in writing, and document the result. That approach matters in Brookhaven specifically because so many chimneys here have hidden damage that only a camera scope reveals. A flashlight from the hearth will not show you a cracked clay tile liner 14 feet up, and it will not show you whether your neighbor’s gas flue is cross-drafting into your fireplace through a shared stack. We show you the photo. Then we quote the repair.
Response time to Brookhaven is usually 24-48 hours for non-emergency cap and crown work, and our scheduling is coordinated from the brand’s Atlanta office with crews serving Brookhaven locally. Calls are answered by a live person around the clock, not a voicemail, and you’ll get a text when your named tech is on the way.
Our Chimney Cap & Crown Services in Brookhaven
Cap Installation
A properly sized stainless steel cap keeps rain out, blocks animal entry, and stops sparks from landing on your roof. In Brookhaven, where the tree canopy is dense and actively protected by local ordinance, a cap without adequate mesh clogs fast with oak leaves and pine needles. We size the cap to the flue, not to what’s on the shelf, and stock Famco and Copperfield parts locally for Brookhaven jobs. Standard single-flue cap installation in Brookhaven runs $425-$750.
Cap Replacement
Rusted, bent, or missing caps are among the most common finds on Drew Valley ranches and 1960s splits. A deteriorated cap lets rain fall directly down the flue, which accelerates spalling on old clay tile liners. We remove the old cap, measure the flue opening, and install a replacement rated for your appliance. If you have a gas log set in the original wood-burning fireplace, the cap selection changes, and we’ll explain why before quoting.
Crown Repair
The mortar crown is the concrete slab at the top of the chimney that sheds water away from the flue. Original 1920s-era crowns in Historic Brookhaven are frequently so eroded after 80-plus years of rainfall that water runs between the brick wythes and rots the smoke chamber shoulders below. Crown repair in Brookhaven typically runs $650-$1,200 depending on square footage and the extent of the damage. We assess the crown with close-up photos during the camera inspection, then quote the repair in writing.
Crown Coating
For crowns that are still structurally sound but showing hairline cracks, a Gelco crown coating seals the surface and extends the crown’s life by years. This is a popular choice on Ashford Park mid-century homes where the crown hasn’t fully failed but is clearly absorbing water. Coating runs $325-$550 in Brookhaven and includes surface prep and a written warranty on the application.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Brookhaven
We install and repair chimney caps and crowns from Famco, Copperfield, and DuraFlex, sourced through Haven’s buying network specifically to keep Brookhaven prices honest. These are the same manufacturers we’ve been using for years, and we stock common sizes locally so a standard cap replacement doesn’t require a second visit for parts. For custom multi-flue caps on Historic Brookhaven estate stacks, we fabricate to the exact flue spacing and verify fit on site before anchoring. Nothing leaves our truck without a photo record of the completed installation, per Clause 4 of the Haven Standard.
Common Chimney Cap & Crown Problems We See in Brookhaven Homes
Brookhaven’s mix of century-old estates, mid-century ranches, and newer townhomes produces a distinct set of cap and crown failures. Here’s what we see most:
- Shared-stack cross-contamination on Peachtree Road townhomes. Attached units often share a single masonry stack across multiple flues. When a common cap is cracked or missing, a neighbor’s gas flue can dump moisture and carbon monoxide into the adjacent fireplace flue. A custom multi-flue cap with proper spacing fixes the problem, and it’s a repair most single-family homeowners never need.
- Canopy debris clogging caps on Drew Valley ranches. Brookhaven’s protected oaks drop leaves, twigs, and acorns year-round. Single-flue caps with coarse mesh clog fast, forcing rainwater down the flue and accelerating spalling on the original clay tile liner. We specify fine-mesh caps on these homes and note the mesh size in the written scope.
- Eroded original mortar crowns in Historic Brookhaven. These 1910s-1930s estate chimneys hold up structurally, but the crowns were built with 1920s mortar mixes. After 80 or more years of humid subtropical rainfall, the crown erodes, flashing separates, and water intrudes between the brick wythes. Crown coating or full crown rebuild is standard on these homes.
- Gas log installations without relining. In the 1990s and 2000s, a lot of Brookhaven homeowners installed gas log sets into original wood-burning fireboxes without upgrading the liner. DeKalb County inspectors often missed it. That unlined gas flue runs hotter and wetter than the structure was designed for, and the cap and crown suffer the consequences. If you bought a pre-2000 Brookhaven home with a gas log set, a liner integrity check is standard practice before we quote any cap or crown work.
Pricing for Chimney Cap & Crown in Brookhaven, GA
Here are the price ranges Brookhaven homeowners can expect. Every quote is delivered in writing before work begins, and it includes the scope, the materials, the warranty, and the photo record.
- Single-flue cap installation: $425-$750
- Cap replacement (standard): $375-$675
- Custom multi-flue cap (Historic Brookhaven shared stacks): $950-$1,850
- Crown repair (mortar patch or partial rebuild): $650-$1,200
- Crown coating (Gelco sealant, structurally sound crown): $325-$550
What changes the price most in Brookhaven is flue count. A single-flue ranch cap is straightforward. A four-flue shared stack on an estate home requires a custom fabrication and more time on the roof. That is exactly the kind of job we’ve handled repeatedly, and the written quote reflects actual measurements, not guesswork. Bring us a competitor’s written quote and we’ll give you a free second opinion on it. Call (980) 580-8641 to schedule.
We Also Serve Cities Near Brookhaven
Our crews serve Chimney Cap & Crown in Brookhaven and the surrounding metro, including Atlanta, Sandy Springs, Roswell, and Johns Creek. The same written-price standard, camera-scan inspection, and Done Right Promise apply in every market. If you’re in one of those cities, call (980) 580-8641 and ask for the same documentation package we deliver in Brookhaven.
Serving Brookhaven, GA - Our Local Coverage Area
We’re based in the Brookhaven area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Brookhaven
Yes. Attached townhomes along Peachtree Road often share a single masonry stack across multiple flues, which means the cap has to be sized and spaced for every flue in the stack, not just yours. A standard single-flue cap is not adequate when a neighbor’s gas flue sits adjacent to your fireplace flue. We measure the full stack, identify every active flue, and quote a custom multi-flue cap that vents each flue independently. Call (980) 580-8641 for a camera inspection and an exact written quote.
Brookhaven’s dense, protected tree canopy drops leaves, twigs, and acorns onto roofs year-round, and that debris accumulates in chimney caps faster than in nearby communities with fewer mature oaks. A clogged cap traps moisture inside the flue and accelerates crown erosion and liner spalling. We recommend fine-mesh caps on Brookhaven homes with heavy tree cover, and the mesh size is noted in your written scope so there’s no ambiguity. Call (980) 580-8641 to schedule a debris check and cap inspection.
If a shared masonry stack has a missing or cracked common cap, one neighbor’s gas flue can push moisture, carbon monoxide, and combustion byproducts into the adjacent fireplace flue. That’s a safety issue, not a cosmetic one. In Historic Brookhaven’s 1910s-1930s estate chimneys, multiple flues share a single stack, and a deteriorated cap on one flue puts every venting path in that stack at risk. We camera-scan the full stack, identify any cross-drafting, and quote a custom Copperfield multi-flue cap sized to the actual flue spacing. Estimates are free at (980) 580-8641.
Yes. If a gas log set was installed in the original wood-burning firebox without relining, the flue is running hotter and wetter than the structure was designed for, and that affects both cap and crown requirements. On a tree-lined street in Ashford Park, our techs found exactly this setup on a mid-century ranch. The shared masonry stack served both the living room fireplace and the water heater flue, and when we pulled the deteriorated multi-flue cap, cross-drafting had been pushing water heater exhaust back down the fire flue. We installed a custom Copperfield multi-flue cap with proper spacing, sealed the crown with Gelco, and ran a camera scope to confirm the liner was sound before leaving. If your home fits that description, call (980) 580-8641 and we’ll document what’s actually inside your flue before recommending any cap or crown work.
Because the crown is what sheds water away from the flue, and original 1920s-era mortar crowns in Historic Brookhaven are often eroded to the point where water runs between the brick wythes even if the cap itself looks intact. The cap and crown do different jobs. A crown evaluation with a camera scope shows you the actual condition of the mortar, the flashing, and the smoke chamber shoulders beneath. A cap from decades ago doesn’t mean the crown underneath survived. Call (980) 580-8641 for a camera-scan crown evaluation with a documented photo record included.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners Our Brookhaven crews have documented photo records on every cap and crown job since 2009, with a written price before any work starts.