Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Cap & Crown Across Beavercreek
A chimney cap and crown replacement in Beavercreek typically runs $425-$1,150 depending on whether you have a prefab metal flue or a masonry chase. Most cap replacements are done in a single visit, and crown repair is usually completed same-day. We’ve solved a lot of chimney cap failures in Beavercreek, and we’re at (980) 580-8641 when you’re ready to schedule.
Our Chimney Cap & Crown team serves Beavercreek from scheduling out of the brand’s Cleveland office, with local crews dispatched directly to your neighborhood. We know the housing stock here, the freeze-thaw rhythms, and the specific ways a 30-year-old prefab fireplace cap fails when nobody has looked at it in a decade.
Why Emberly Chimney Cleaners Is Beavercreek’s Preferred Chimney Cap & Crown Company
Beavercreek homeowners tend to research before they call. They want to see the problem before paying to fix it. That’s how we’ve worked since 2009, when we made camera-scan documentation the default on every inspection. It’s Clause 4 of the Haven Standard, and it means you walk away with photos, not just a technician’s summary.
Every visit to a Beavercreek home includes a documented photo record of the flue, cap, and crown condition. You see the rust, the crack, the spalling, whatever is actually there. Nothing gets recommended without the images to back it up. If it’s not done right, the 365-Day Done Right Promise means we make it right. That’s stamped on every job.
Our technicians are background-checked and uniformed, with license information displayed on every page of our written quotes. We text when the tech is on the way, and someone answers the phone 24/7. You’re not leaving a voicemail and hoping.
Our Chimney Cap & Crown Services in Beavercreek
Every chimney cap and crown job in Beavercreek starts with a camera inspection. We look at the flue, the chase cover, the cap, the crown, and the smoke chamber where applicable. Then we show you what we found and quote a written price before any work begins. Here’s what we do most often in Beavercreek:
Cap Installation
A new chimney cap on a Beavercreek prefab fireplace typically runs $425-$650 installed. We install multi-flue caps on masonry chases common in 1980s two-stories off Fairfield Road and Grange Hall Road, and single-flue caps on the factory-built systems in 1990s ranches near Kemp Road. Every cap we install is sized to the flue, not guessed at.
Cap Replacement
Cap replacement in Beavercreek is the job we see most on prefab systems. By the time a cap has rusted through, water has likely already reached the refractory panels below. We replace the cap, then camera the firebox to check what else the water hit. Expect $475-$750 on most Beavercreek homes, depending on flue size and cap type.
Crown Repair
Masonry chases in Beavercreek’s 1970s and 1980s homes take a beating from Miami Valley freeze-thaw cycles. Water seeps into hairline cracks, freezes, expands, and spalls the mortar crown. Crown repair runs $350-$750 depending on how much of the crown needs rebuilding. We use materials from Copperfield, and we show you the damage before we touch it.
Crown Coating
For a crown that’s solid but porous, we apply a flexible crown coating to seal against water intrusion. This runs $275-$450 in Beavercreek and buys years before a full rebuild is necessary. If the crown is structurally failing, coating won’t save it. We’ll tell you that plainly, with the camera footage to prove it.
Multi-Flue Cap & Custom Cap
Homes in Beavercreek with two or three flues in one masonry chase often need a custom multi-flue cap. These run $650-$1,150, fabricated to fit the specific chase dimensions. We also source and install custom caps for unusual chase sizes on the subdivision homes built quickly during the WPAFB expansion years, when standardization wasn’t always the priority.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Beavercreek
We service and install caps and crowns using materials from Olympia Chimney, Gelco, and Copperfield, sourced through Haven’s buying network to keep prices honest. When a Beavercreek homeowner needs a replacement part for a 1980s prefab system, we don’t wait weeks for a special order. We carry common cap sizes and crown materials locally, which means most replacements are completed in a single visit. If your existing cap came from a specific manufacturer, we’ll match the replacement to your flue dimensions rather than forcing a universal fit.
Common Chimney Cap & Crown Problems We See in Beavercreek Homes
- Rusted-through chase covers on prefab fireplaces. Beavercreek’s 1970s-1990s tract homes were built with factory-built, zero-clearance fireplaces. Those metal chase covers rust out after 30 years, letting rain pour directly onto the firebox below. We see this constantly in the ranch and split-level neighborhoods off North Fairfield Road and Dayton-Xenia Road.
- Freeze-thaw crown cracking on masonry chases. The Miami Valley goes through roughly 25-35 freeze-thaw cycles a year. Water gets into tiny mortar cracks, expands when it freezes, and widens the crack each season. By the time a Beavercreek homeowner notices the spalling brick, the crown has usually been failing for several winters.
- Missing or damaged caps after ownership turnover. With Wright-Patterson Air Force Base nearby, Beavercreek sees high military PCS turnover. Homes transfer every 2-3 years, often without a Level 2 inspection. Our technicians routinely find prefab fireplaces missing chase covers entirely, or caps that were never replaced after animal damage, because no owner lived in the house long enough to notice.
- Cap debris blocking draft. Rusted cap pieces drop into the flue and partially block airflow. On a cold February night in Beavercreek, that means smoke backing up into the living room or carbon monoxide seeping into the house. A camera down the flue reveals the obstruction in minutes.
Pricing for Chimney Cap & Crown in Beavercreek, OH
Here’s what Beavercreek homeowners can expect to pay. A single-flue cap installation runs $425-$550. Multi-flue cap installation on a masonry chase runs $650-$1,150. Crown repair is $350-$750 depending on how much mortar needs rebuilding. Crown coating is $275-$450. Cap replacement on a prefab system is $475-$750. Every quote is written and specific to your chimney before any work starts. We don’t charge for the camera inspection when it’s part of a cap or crown job. If you have a competitor’s written quote, bring it in and we’ll give you a free second opinion.
We Also Serve Cities Near Beavercreek
While most of our work is in Beavercreek itself, our crews regularly handle Chimney Cap & Crown jobs in Columbus, Cleveland, Cincinnati, and Toledo. If you’re just outside Beavercreek, call and we’ll confirm coverage for your address.
Serving Beavercreek, OH - Our Local Coverage Area
We’re based in the Beavercreek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cap & Crown in Beavercreek
Because the firebox can function perfectly while the crown above it quietly fails. Beavercreek’s 1980s builds used mortar crowns on masonry chases, and 35-40 years of Miami Valley freeze-thaw cycles have taken their toll. Water seeps into hairline cracks during winter, freezes, expands, and gradually breaks the crown apart. The fireplace still drafts, so the homeowner never knows until spalling brick appears or water stains show up on the ceiling. Call (980) 580-8641 and we’ll camera the crown and show you the actual condition.
Yes, and often more urgently than masonry chimney owners. Prefab systems have metal chase covers and caps that rust out after 20-30 years. Beavercreek homes built during the WPAFB expansion in the 1970s-1990s are now squarely in that window. A rusted chase cover lets rain pour directly onto the refractory panels, and you won’t see the damage until the firebox starts falling apart. Every prefab fireplace in Beavercreek should be inspected with a camera, cap included. Call (980) 580-8641 for a free estimate.
You can often replace just the cap. Multi-flue prefab systems in Beavercreek usually have separate metal caps for each flue, and if one has rusted through while the others are still sound, we replace the damaged cap only. But we always camera the full chase before deciding. If water has already damaged the chase cover or the firebox panels, replacing only the cap would be a band-aid. You’ll see the footage and decide with us. Call (980) 580-8641 to schedule.
It depends on how much of the crown is still structurally intact. If the crown is solid with surface porosity, a flexible crown coating from Gelco will seal it and buy years. But if freeze-thaw cycles have already cracked the crown into pieces that move when pressed, coating won’t hold. We’ll show you the crown up close with the camera and tell you plainly whether coating is enough or whether a rebuild makes sense. Call (980) 580-8641 and we’ll give you an honest read.
Look at the edges. Animal damage, usually from squirrels or raccoons trying to get in, shows up as bent metal, claw marks, or torn mesh. Rust damage shows up as flaking metal, holes with orange-brown edges, and pieces missing along the seams. In Beavercreek, we see both, and often together: an animal exploits a rust weak point and finishes the job. A camera inspection tells you which happened, and the fix is the same either way: replace the cap and add proper screening. Call (980) 580-8641 to book.
What a Cap or Crown Replacement Looks Like in Beavercreek
On a split-level off North Fairfield Road, we found a 1980s prefab fireplace with a rusted-through chase cover and a cracked cap that had been letting rain pour onto the refractory panels below. The homeowner had no idea because the fireplace still lit and drafted. Our tech replaced the cap with an Olympia Chimney unit, sealed the chase cover, and then showed the homeowner the camera footage of the water damage before recommending any further work. That’s how every job in Beavercreek goes: evidence first, price written down, work second.
If your chimney has been ignored through a few PCS turnovers or just years of quiet winters, the cap and crown are where problems usually start. Schedule the inspection, see the footage, and decide with the facts in front of you. Call (980) 580-8641 for a free estimate.
Written by Corrine Halstead, Owner at Emberly Chimney Cleaners, serving Beavercreek under the Haven Standard since 2009.
Chimney Cap & Crown in Nearby Areas
