Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Cleaning in Orlando, FL
Chimney cleaning in Orlando typically costs $149 to $249 for a standard sweep, and the job here is different from colder cities: creosote buildup is rarely the issue. What Orlando homeowners actually face is a flue that has sat unused for ten or eleven months, collecting animal nests, biological growth, and rain-driven moisture damage. When that first December cold front hits, you want to know the flue is clear before you light it. Call (980) 580-8641 and we’ll give you a written price before any work starts.
Why Orlando Homes Are Different
Orlando’s subtropical climate means the average homeowner fires their fireplace perhaps 5 to 15 nights a year, almost always during brief winter cold snaps that push temperatures into the 40s. That pattern changes what a chimney professional looks for. Instead of thick, glossy creosote, we’re looking for what took up residence during the long dormant stretch. Federally protected chimney swifts nest in uncapped masonry flues across Central Florida roughly from March through September under the Migratory Bird Treaty Act, so a chimney that was cleanable in January can become legally untouchable by spring. Homes in Conway, Pine Hills, and older Orange County suburbs built during the post-Disney boom of the 1970s through 1990s often have masonry fireplaces that were largely decorative from day one. Homes from the late 1990s and 2000s more commonly use factory-built prefabricated inserts with Class A double-wall pipe, which calls for a different inspection protocol and different replacement parts. Fifty to 54 inches of annual rain, concentrated in daily afternoon thunderstorms from June through September, punishes mortar crowns, caps, and flashing on chimneys that never get a drying fire. There’s no freeze-thaw cycle here to crack bricks, but 74% average relative humidity and relentless UV do their own damage year-round.
Our Main Orlando Services
Two services account for most of the calls we get from Orlando homeowners: fireplace service work on prefabricated units and chimney cap or crown repairs tied to our storm patterns.
Fireplace Services in Orlando
Most Orlando homes built after the late 1990s have factory-built fireplace inserts rather than full masonry fireboxes. Those units use Class A double-wall chimney pipe, and when they fail, it’s typically a rusted chase top, a failing gasket, or a cracked refractory panel. Corrine Halstead and our techs inspect these units against the manufacturer’s spec, not a generic checklist, because prefab fireplaces are tested systems where every component matters. We document what we find with a camera and give you the written scope before any repair. See Fireplace Services in Orlando for the full breakdown.
Chimney Cap & Crown in Orlando
An uncapped flue in Orlando is an open invitation: chimney swifts in spring and summer, rain in the wet season, squirrels and raccoons year-round. We push hard on cap installation during the November to February window because once swifts arrive under federal protection, the flue is off-limits until they leave. A cracked mortar crown lets Orlando’s heavy afternoon downpours seep into the chimney structure, and that moisture accelerates deterioration from the inside. See Chimney Cap & Crown in Orlando for cap and crown pricing and options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Sweep in Orlando
Chimney sweep in Orlando is less about removing heavy creosote and more about clearing what moved in while the fireplace sat idle. The real hazard here is a homeowner lighting the first fire in December after two years of non-use, only to find a bird nest, a squirrel midden, or hardened biological growth blocking the flue. That’s the scenario our Chimney Sweep process is built around, and every job includes a Level 2 camera inspection and documented photo record under Haven Standard Clause 4.
Level 2 Inspection
Signs you need it
You’ve bought or sold a home, changed fuel type, had a chimney fire, or you haven’t used the fireplace in over a year and want to light it safely.
What it costs in Orlando
A Level 2 inspection in Orlando runs $199 to $389, depending on roof access and whether we’re also scoping a prefab insert.
How we do it
We run a camera from the firebox to the flue crown, document every joint and surface, and hand you the footage and a written findings report before any repair quote.
Creosote Removal
Signs you need it
Your last sweep found Class II or Class III creosote, or you’ve burned unseasoned wood and can smell a sharp, tar-like odor near the fireplace.
What it costs in Orlando
Creosote removal in Orlando ranges from $199 to $349 depending on glaze stage, with Class III glazed creosote falling in the $300 to $450 band.
How we do it
We use rotary loops and chemical treatments matched to the creosote stage, then camera-verify the flue is clean and note what’s still adhered before we leave.
Soot Removal
Signs you need it
Black dust accumulates on the fireplace surround or you see a sooty film on the damper and smoke shelf after moderate use.
What it costs in Orlando
Soot removal in Orlando is $149 to $249, typically bundled into a standard sweep when we’re already in the flue.
How we do it
We brush and vacuum the firebox, smoke chamber, damper, and flue walls, then run a camera to confirm no soot residue remains in the smoke shelf.
Annual Sweep
Signs you need it
It’s been more than 12 months since the last cleaning, or you’re entering your first winter in a home with an unknown maintenance history.
What it costs in Orlando
An annual sweep in Orlando runs $179 to $279, which includes the camera inspection and photo record as standard, not as an add-on.
How we do it
We protect the hearth, brush and vacuum the full flue, sweep the smoke chamber and firebox, and leave you with dated photos proving what was removed.
What Chimney Sweep Costs in Orlando
| Item | Typical range in Orlando |
|---|---|
| Standard chimney sweep | $149 - $249 |
| Level 2 camera inspection | $199 - $389 |
| Creosote removal (Class II-III) | $199 - $450 |
How often should I have my chimney swept in Orlando?
Once a year, even with light use. Orlando’s long off-season invites nests and biological growth that can block a flue. The photos from each sweep build a record that proves your maintenance history if you sell the home.
Do I really need a sweep if I only use my fireplace a few nights a year?
Yes. In Orlando, low use means animals and moisture, not creosote, are the threat. We’ve pulled nests, dead birds, and hardened biomass out of flues that hadn’t been lit in two winters. Call (980) 580-8641 for an exact quote; estimates are free.
Chimney Repair in Orlando
Chimney repair in Orlando is driven by water. With 50-plus inches of annual rain and a dormant season that lasts most of the year, mortar joints, crowns, and flashing absorb moisture with no drying fire to reverse it. The result is accelerated erosion and, in many Conway and Pine Hills homes from the 1970s and 1980s, spalling brick faces that need correction before the structure gets worse. Our Chimney Repair process starts with a camera look at what’s actually failing, then a written scope and price.
Mortar Repointing
Signs you need it
Mortar joints are crumbling, recessed, or you can pull loose grit from between bricks with a fingernail.
What it costs in Orlando
Mortar repointing in Orlando runs $800 to $1,800 for a typical residential chimney, depending on access and joint depth.
How we do it
We grind out deteriorated mortar to a consistent depth, match the original joint profile and color, and repoint with a mix suited to Central Florida humidity.
Flashing Repair
Signs you need it
Water stains on the ceiling near the fireplace, rusted flashing visible at the roofline, or damp drywall after heavy afternoon storms.
What it costs in Orlando
Flashing repair in Orlando is $400 to $1,100, depending on whether we’re re-sealing a step-flashing seam or replacing the full assembly.
How we do it
We remove the old flashing, inspect the underlying roof deck, install new step and counter flashing with proper overlaps, and water-test the junction before we leave.
What Chimney Repair Costs in Orlando
| Item | Typical range in Orlando |
|---|---|
| Mortar repointing | $800 - $1,800 |
| Flashing repair | $400 - $1,100 |
| Spalling brick repair | $900 - $2,200 |
Can Orlando’s rain actually break a chimney?
Yes, but slowly. The damage isn’t freeze-thaw cracking here; it’s water saturating mortar and brick, then biological growth and mineral breakdown over seasons. A small flashing leak left for two wet summers often becomes a repointing job.
Do I need a repair before I sell my Orlando home?
If a home inspection flags the chimney, most buyers in this market will ask for it. A documented Level 2 camera report and written repair scope from us usually resolves the objection faster than a buyer’s guesswork. Call (980) 580-8641 for a quote.
Chimney Liner & Rebuild in Orlando
Chimney liner and rebuild work in Orlando usually follows one of two findings: a clay tile liner cracked or shifted from decades of humidity swings, or structural movement in a 40-year-old masonry chimney that no longer meets clearance-to-combustibles. Prefab units from the 1990s and 2000s often need a stainless liner retrofitted when the original Class A pipe corrodes at the chase top. We document the condition on camera before recommending anything, and every Chimney Liner & Rebuild quote is written, scoped, and warranted.
Stainless Steel Liner
Signs you need it
Your clay tile liner is cracked, spalled, or missing sections, or you’re converting a wood-burning fireplace to gas and need a properly sized flue.
What it costs in Orlando
A stainless steel liner in Orlando runs $2,800 to $5,500 installed for a single-story home, varying by run length and diameter.
How we do it
We size the liner to the appliance and height, insulate as code requires, install from the crown down with a top plate and cap, and camera-verify the full run.
Partial Rebuild
Signs you need it
The top courses of brick are loose or spalling, the mortar crown is failed, or the chimney above the roofline is leaning visibly.
What it costs in Orlando
A partial rebuild in Orlando typically runs $1,800 to $4,000 depending on how many courses come down and roof access.
How we do it
We remove the damaged courses, rebuild with new brick and reinforced mortar, pour a proper crown with a drip edge, and finish with a cap if needed.
What Chimney Liner & Rebuild Costs in Orlando
| Item | Typical range in Orlando |
|---|---|
| Stainless steel liner | $2,800 - $5,500 |
| Partial rebuild | $1,800 - $4,000 |
| Full chimney rebuild | $6,000 - $12,000 |
Do I really need a new liner, or can the old one be patched?
Sometimes a clay liner with minor cracking can be resurfaced with HeatShield or a similar product. If the damage is structural or the flue is undersized for the appliance, a stainless liner is the correct fix. We show you the camera footage either way.
How long does a liner or rebuild take in Orlando?
Most liner installs take one day. Partial rebuilds run two to three days depending on weather, since afternoon thunderstorms from June through September can interrupt masonry work. Call (980) 580-8641 to schedule and we’ll give you a written timeline.
Brands We Service in Orlando
We stock and install components from Copperfield, DuraFlex, HeatShield, and Gelco, sourced through Haven’s buying network to keep pricing honest. Most common parts are on the truck; special-order liner kits or prefab replacement panels typically arrive in three to five business days. See our brands for the full parts list.
Pricing for Chimney Cleaning in Orlando, FL
| Service | Typical range in Orlando |
|---|---|
| Standard chimney sweep | $149 - $249 |
| Level 2 camera inspection | $199 - $389 |
| Creosote removal | $199 - $450 |
| Soot removal | $149 - $249 |
| Mortar repointing | $800 - $1,800 |
| Flashing repair | $400 - $1,100 |
| Spalling brick repair | $900 - $2,200 |
| Stainless steel liner | $2,800 - $5,500 |
| Partial rebuild | $1,800 - $4,000 |
| Full chimney rebuild | $6,000 - $12,000 |
What pushes a price up in Orlando is roof access: a steep-pitch roof, a second-story chimney, or tight clearance between homes means more setup and safety equipment. Water-damaged masonry also tends to cost more because the failed material goes deeper than it looks. Every quote is written before work starts, with the scope and warranty on paper, per Haven Standard Clause 1.
Neighborhoods We Serve in Orlando
We cover all of Orlando and the older Orange County suburbs, including the 1970s through 1990s housing stock where most masonry chimneys live. Most appointments can be scheduled within three to five business days, though November and December fill faster.
- Conway
- Pine Hills
- Baldwin Park
- Dr. Phillips
- College Park
Service Area - Cities Near Orlando
Our crews also serve the surrounding Orlando metro, including Altamonte Springs, FL, Apopka, FL, Ocoee, FL, and Winter Garden, FL. Dispatch and scheduling are coordinated from the brand’s Orlando office, and crews serve the metro locally.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Orlando
Most cleaning and inspection work requires no permit. Structural rebuilds or liner installations may require one depending on your municipality and the scope. We confirm code requirements for your specific job before we quote, and the written scope reflects any permit fees.
Yes. If swifts are actively nesting in your flue, federal law prevents removal until they leave, typically by late September. We document the nest, cap the flue after the birds depart, and recommend scheduling cap work in the November to February window so the cycle doesn’t repeat.
Clear a path around the fireplace and keep pets secured if they’re reactive to visitors. If your fireplace is in a screened patio or pool enclosure, make sure the gate or screen door is accessible. We’ll text when we’re on the way, and you’ll get the written price before any work begins. Call (980) 580-8641 to book.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orlando Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M.