Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Cleaning in Bloomingdale, FL
Chimney cleaning in Bloomingdale typically runs $149 to $199 for a standard sweep, depending on creosote class and flue condition. Most Bloomingdale homes date to the 1980s and 1990s, which means the real job is often less about heavy soot and more about moisture damage, rusted dampers, and animal intrusion that build up while the fireplace sits unused through ten months of subtropical humidity. If you’re noticing a musty smell from the firebox or can’t remember the last time the flue was inspected, call us at (980) 580-8641 and we’ll get a camera down it.
Why Bloomingdale Homes Are Different
Bloomingdale’s predominant 1980s-90s suburban tract homes were built with builder-grade masonry fireplaces installed as sales amenities, not primary heat sources. That means these chimneys have sat dormant in subtropical humidity for 30 to 40 years with only a handful of fires per year. The real threat in Bloomingdale isn’t heavy creosote from constant burning. It’s moisture-driven mortar decay, rusted dampers, and animal intrusion from extended disuse in Hillsborough County’s year-round wet heat.
The Tampa Bay area climate delivers high humidity and only brief, shallow cold snaps, so local chimneys go unused for 10 to 11 months annually while continuously absorbing moisture. That produces efflorescence, spalling brick, and mold growth inside flues that see almost no smoke to dry them out. Chimney swifts, a federally protected migratory bird, commonly colonize uncapped chimneys in the greater Brandon-Bloomingdale corridor each spring. Once nesting begins, legally no work can be done until the birds depart in fall, so we push pre-season cap installations hard in late winter before the swifts arrive.
Our Main Bloomingdale Services
Two services generate most of our Bloomingdale calls: fireplace services for units that have sat dormant and need a functional check, and cap and crown work to keep the subtropical weather and chimney swifts out.
Fireplace Services in Bloomingdale
Bloomingdale fireplaces were built for occasional decorative use, not as heating systems, so when homeowners finally light a fire after years of disuse, they often find a rusted damper, a stubborn draft, or an odor problem they can’t place. We inspect the firebox, damper, and flue as one system, then give you a written price for whatever the camera shows. Most Bloomingdale jobs are fixed in a single visit. Read more about Fireplace Services in Bloomingdale.

Chimney Cap & Crown in Bloomingdale
An uncapped chimney in Bloomingdale is an open invitation to chimney swifts, rainwater, and the humidity that never lets up. Crown cracks let water into the mortar joints, and a missing cap means birds and debris. We install stainless steel caps and rebuild crowns before swifts arrive in spring, because once they nest, federal law stops all work until fall. See Chimney Cap & Crown in Bloomingdale for specifics.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Sweep in Bloomingdale

A chimney sweep in Bloomingdale is less about clearing heavy creosote from a wood-burning furnace and more about removing what decades of subtropical humidity and disuse left behind. Most of the chimneys we open in Bloomingdale show Class I or Class II creosote, but the bigger findings are rusted dampers, nesting debris from chimney swifts, and mortar that’s starting to fail from constant moisture exposure. We approach every job as a Chimney Sweep inspection first and a cleaning second, because the camera tells us what the flue actually needs.
Level 2 Inspection
Signs you need it
You’re buying or selling a Bloomingdale home, or you’ve had an animal in the chimney, a chimney fire, or a major weather event.
What it costs in Bloomingdale
A Level 2 camera inspection in Bloomingdale runs $289 and includes full video documentation, usable for real estate transactions and insurance questions.
How we do it
We run a camera from the firebox to the termination cap, documenting every liner joint, mortar seam, and obstruction so you can see exactly what we see.
Creosote Removal
Signs you need it
You see black, tar-like buildup on the damper or firebox walls, or you notice a strong campfire smell even when the fireplace hasn’t been used in months.
What it costs in Bloomingdale
Creosote removal in Bloomingdale ranges from $199 to $279 depending on whether it’s Class II flaky buildup or Class III tar-like glaze.
How we do it
We use rotary brushes and specially formulated removal agents for glazed creosote, then re-inspect with the camera to confirm the flue is clean and sound.
What Chimney Sweep Costs in Bloomingdale
| Item | Typical range in Bloomingdale |
|---|---|
| Standard sweep (Level 1 included) | $149 - $199 |
| Level 2 camera inspection | $289 flat rate |
| Creosote removal (Class II or III) | $199 - $279 |
How often should I have my Bloomingdale chimney swept?
Even with light use, every year. In Bloomingdale the issue is as much about inspecting for moisture damage, rust, and swift nesting as it is about creosote. Call (980) 580-8641 to schedule.
Does a dormant fireplace still need cleaning in Bloomingdale?
Yes. Moisture, insects, and small animals create blockages and odor even without fires. A camera inspection finds what’s actually in there before it becomes a repair bill.
Chimney Repair in Bloomingdale

The builder-grade masonry that went up with these 1980s-era homes was never heavy-duty, and thirty years of moisture absorption has left many crowns cracked and mortar joints soft. Most of the repair work we do in Bloomingdale starts with a Chimney Repair camera inspection so you can see the damage yourself before you spend a dollar.
Mortar Repointing
Signs you need it
You see crumbling or missing mortar between bricks, white efflorescence on the chimney face, or loose bricks that wiggle slightly.
What it costs in Bloomingdale
Mortar repointing in Bloomingdale runs $800 to $2,500 depending on how many courses need work and how much access scaffolding requires.
How we do it
We grind out deteriorated mortar to a proper depth, then pack fresh mortar matched to the original color and finish so the repair blends in.
Chimney Waterproofing
Signs you need it
You see dark water stains inside the firebox, spalling brick faces, or you’ve already had one repointing job that didn’t hold because moisture kept wicking in.
What it costs in Bloomingdale
Chimney waterproofing in Bloomingdale is typically $600 to $1,200 depending on chimney height and surface condition.
How we do it
We apply a vapor-permeable siloxane sealant that keeps liquid water out while letting moisture inside the masonry escape, then document the application with photos.
What Chimney Repair Costs in Bloomingdale
| Item | Typical range in Bloomingdale |
|---|---|
| Mortar repointing | $800 - $2,500 |
| Spalling brick repair | $600 - $1,800 |
| Chimney waterproofing | $600 - $1,200 |
Can a cracked crown wait until after hurricane season?
In Bloomingdale, no. Every storm and humid month pushes water further into the mortar. A small crown crack becomes a repointing job, then a rebuild. Get a written quote now.
How do I know if my Bloomingdale chimney has water damage?
Efflorescence, spalling brick, musty firebox odor, and rusted dampers are the telltale signs. A Level 2 camera inspection shows exactly how far the moisture has penetrated.
Chimney Liner & Rebuild in Bloomingdale

Chimney liner and rebuild work in Bloomingdale almost always starts the same way: a camera inspection finds a liner that’s cracked, corroded, or missing entirely after 30 years of moisture exposure. The builder-grade clay tile liners installed in these 1980s tract homes were never designed for decades of Tampa-area humidity. When a liner fails, the fix is usually a stainless steel replacement or a partial rebuild, and we quote both in writing before anything comes apart. Here’s what a Chimney Liner & Rebuild job looks like in Bloomingdale.
Stainless Steel Liner
Signs you need it
Your camera inspection shows cracked or missing clay tile sections, or you’re converting a wood-burning fireplace to gas and need a properly sized liner.
What it costs in Bloomingdale
A stainless steel liner installation in Bloomingdale runs $2,900 to $5,200 depending on flue length, diameter, and access.
How we do it
We remove the old liner sections, measure the flue precisely, and install a DuraFlex or Copperfield stainless liner with proper insulation and top and bottom termination.
Partial Rebuild
Signs you need it
The top courses of brick are spalled, the crown is crumbling, and water has been getting in for years, but the lower chimney is still sound.
What it costs in Bloomingdale
A partial rebuild in Bloomingdale ranges from $2,000 to $4,500 depending on how many courses need replacement and the scaffold setup.
How we do it
We remove deteriorated brick down to solid material, rebuild with new brick and proper mortar, pour a new crown, and document the whole job with photos before and after.
What Chimney Liner & Rebuild Costs in Bloomingdale
| Item | Typical range in Bloomingdale |
|---|---|
| Stainless steel liner | $2,900 - $5,200 |
| Liner replacement (mid-range) | $2,900 - $5,000 |
| Partial rebuild | $2,000 - $4,500 |
Is a stainless liner worth it for a fireplace I rarely use?
Yes, because the alternative is flue gases leaking into the home or a chimney fire. A liner protects the structure even when you only burn a few fires a year.
Can I just patch a cracked liner instead of replacing it?
Sometimes, with a product like HeatShield, but only if the damage is limited. The camera inspection tells us whether a patch is safe or a full liner is required.
Brands We Service in Bloomingdale

We work on chimneys built with all major flue and cap brands, and we stock common repair parts from Copperfield and DuraFlex locally for Bloomingdale jobs. Turnaround on custom orders is typically a few days. See our brands for the full list.
Pricing for Chimney Cleaning in Bloomingdale, FL
| Service | Typical range in Bloomingdale |
|---|---|
| Standard sweep (Level 1 included) | $149 - $199 |
| Level 2 camera inspection | $289 flat rate |
| Creosote removal (Class II or III) | $199 - $279 |
| Mortar repointing | $800 - $2,500 |
| Spalling brick repair | $600 - $1,800 |
| Chimney waterproofing | $600 - $1,200 |
| Stainless steel liner | $2,900 - $5,200 |
| Liner replacement | $2,900 - $5,000 |
| Partial rebuild | $2,000 - $4,500 |
What pushes the price up in Bloomingdale is usually access: steep roof pitches, tight clearances between tract-home lots, and the extra scaffold work moisture-damaged chimneys often require. Every job gets a written price before we start, so you never have to guess or call for a quote.
Neighborhoods We Serve in Bloomingdale

We cover all of Bloomingdale, including the older 1980s sections and the newer additions that filled in through the 1990s. Our crews typically reach Bloomingdale addresses within a day or two of booking.
- Bloomingdale Estates
- Bloomingdale Ridge
- Country Place
- Williams Reserve
- Bell Shoals area
Service Area - Cities Near Bloomingdale
Our crews serve Bloomingdale and the surrounding Tampa Bay region. If you’re checking service coverage from a neighboring area, we also publish full local resources for Tampa, FL, Orlando, FL, Miami, FL, and Jacksonville, FL.
Serving Bloomingdale, FL - Our Local Coverage Area

We’re based in the Bloomingdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Bloomingdale
Most routine sweeps and inspections do not require a permit. Structural rebuilds may require Hillsborough County permitting, and we handle that paperwork as part of any rebuild quote.
Yes, we schedule Bloomingdale inspections within a day or two of your call. Dispatch and scheduling are coordinated from the brand’s Miami office, and local crews serve Bloomingdale directly.
Some neighborhoods have architectural guidelines for exterior repairs, especially visible brick or cap work. We provide written specs and photos for HOA approval on request.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomingdale Customers Say
"Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O."Gas insert service done properly with the readings written down. The technician had the certification number printed on the paperwork."
- Bettina A."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D.





Before
After
Before
After